V3 ENGLISH 17-0873
4Repeat steps 2 and 3 to remove the pin from the other side of the
link, and then remove the link. Continue removing pins and links
until the band is the desired length.
5Press the two unattached links together, with the arrows on the
backside of the links facing the same direction, and slide a pin into
the hole that is on the opposite side of the arrows.
6Place the watch band into the slot with the arrows on the backside
of the band face up and pointing toward the pin-removal rod. Align
the pin with the rod, and then turn the knob clockwise to push the
pin into the watch band link.
TIP: Store the
unused pins
and links.
REPLACING THE PIN-REMOVAL ROD
1Open the bottom cover to nd the two spare pin-removal rods in
the tool.
2Pull out the current removal rod with pliers and replace with a
new one.
ONE-YEAR LIMITED WARRANTY
CONTACT PLATINUM
For customer service, call 1-800-499-3964
Apple Watch is a trademark of Apple Inc., registered in the U.S. and other countries.
The Pt logo is a registered trademark of Best Buy.
PLATINUM is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
