Playcraft Fairfield Cross Creek User manual

Cross Creek
ASSEMBLY INSTRUCTIONS

assistance.
1) Your table is designed for use indoors in a climate controled environment only.
Damage can occur if the table is exposed to water, dampness, high humidity,
freezing temperatures, etc.
2) Professional assembly is strongly recommended. This assembly manual is intended to
guide an experienced slate pool table installer with the assembly process of this
for which the process is the same regardless of the cabinet type.
2) The pool table cabinet and slate are extremely heavy. Two or more people are
required for assembly.
or serious injury.
5) Only use the table for its intended purpose.
6) Damaged or worn parts may be dangerous for users and the integrity of the table.
will void the warranty.
8) Check all screws, bolts, etc. on a regular basis to ensure that they are in good working
as required with owning a slate pool table
Cross Creek
altering

PART LIST
NO. IMAGE DESCRIPTION SPECIFICATION QTY UNIT
H1
LEG 1100*200*660 2 PCS
ASSEMBLY
POSITION FRAME
H2
BOTTOM
SUPPORT
BEAM
1746*180*60 1 PCS
ASSEMBLY
POSITION FRAME
H3
CENTER
SUPPORT
BEAM
1936*120*565 1 PCS
ASSEMBLY
POSITION FRAME
H4
CROSS BEAM 1173*180*40 2 PCS
ASSEMBLY
POSITION GRADE A BEAM
H5
LONGITUDINA
L BEAM 1936*180*40 2 PCS
ASSEMBLY
POSITION GRADE A BEAM
H6
MIDDLE BEAM 893*120*40 2 PCS
ASSEMBLY
POSITION GRADE A BEAM
H7
SIDE SLATE1 805*1295*40 1
ASSEMBLY
POSITION TOP RAIL
H8
MIDDLE SLATE 805*1295*40 1 PCS
ASSEMBLY
POSITION TOP RAIL
H9
SIDE SLATE 2 805*1295*40 1
ASSEMBLY
POSITION TOP RAIL
H10
CLOTH 1
ASSEMBLY
POSITION TOP RAIL
H11
1、4# TOP
RAIL 1083*164*43 2 PCS
ASSEMBLY
POSITION TOP RAIL
H12
2、5# TOP
RAIL 1111*164*43 2 PCS
ASSEMBLY
POSITION TOP RAIL
H13
3、6# TOP
RAIL 1101*164*43 2 PCS
ASSEMBLY
POSITION TOP RAIL
H14
CORNER 190*190*43 4 PCS
ASSEMBLY
POSITION TOP RAIL
H15
SHORT APRON 1189*140*50 2 PCS
ASSEMBLY
POSITION TOP RAIL
H16
LONG APRON 2307*140*50 2 PCS
ASSEMBLY
POSITION TOP RAIL
H17
MITRE 170*170*135 4 PCS
ASSEMBLY
POSITION TOP RAIL

HARDWARE LIST
NO. IMAGE DESCRIPTION SPECIFICATION
QTY
UNIT
A
DOBULE-HEAD
BOLT ø10*100 4 PCS
USED TO FIX THE BOTTOM SUPPORT BEAM AND
LEGS
ASSEMBLY
POSITION
B
SEMICIRCLE
WASHER M10 4 PCS
USED TO FIX THE BOTTOM SUPPORT BEAM AND
LEGS
ASSEMBLY
POSITION
C
BOLT NUT M10 4 PCS
USED TO FIX THE BOTTOM SUPPORT BEAM AND
LEGS
ASSEMBLY
POSITION
D
FLAT HEAD
SCREW 4.2*40 4 PCS
USED TO FIX THE TOP SUPPORT BEAM AND LEGS ASSEMBLY
POSITION
E
HEX BOLT ø10*70 10 PCS
2 PCS ARE USED TO FIX THE BOTTOM SUPPORT
BEAM AND CENTER SUPPORT BEAM , 8 PCS ARE
USED TO FIX CROSS BEAM AND LEGS
ASSEMBLY
POSITION
F
FLAT WASHER M10*30*2 PCS
2 PCS ARE USED TO FIX THE BOTTOM SUPPORT
BEAM AND CENTER SUPPORT BEAM , 8 PCS ARE
USED TO FIX CROSS BEAM AND LEGS
ASSEMBLY
POSITION
G
HEX BOLT ø12*180 4 PCS
USED TO FIX THE CROSS BEAM ASSEMBLY
POSITION
H
FLAT WASHER M12*30*2 4 PCS
USED TO FIX THE CROSS BEAM ASSEMBLY
POSITION
I
ACRON NUT M12 4 PCS
USED TO FIX THE CROSS BEAM ASSEMBLY
POSITION
J
FLAT HEAD
SCREW 4.2*60 8 PCS
USED TO FIX THE MIDDLE BEAM ASSEMBLY
POSITION
KADJUSTABLE
SCREW
ø10*50 4 PCS
L
ø10*100 12 PCS
USED TO ADJUST AND LEVEL THE SLATE ASSEMBLY
POSITION

M
FLAT HEAD
SCREW 6*60 12 PCS
USED TO FIX THE SLATE AND FRAME ASSEMBLY
POSITION
N
WOODEN PLUG ø10*50 2 PCS
USED TOCONNECT #2 AND #5 TOP RAIL ,#3 AND
#6 TOP RAIL
ASSEMBLY
POSITION
O
BARREL NUT ø8*30 8 PCS
USED TO FIX THE TOP RAIL AND CORNER ASSEMBLY
POSITION
P
SEMICIRCLE
WASHER
M8 8 PCS
USED TO FIX THE TOP RAIL AND CORNER ASSEMBLY
POSITION
Q
FLAT WASHER M8 36 PCS
8PCS ARE USED IIN FIXING TOP RAIL AND
CORNER,16PCS ARE USED IN FIXING APRONS,
12PCS ARE USED IN FIXING APRONS AND TOP
RAILS
ASSEMBLY
POSITION
R
HEX BOLT ø8*80 8 PCS
USED TO FIX THE TOP RAIL AND CORNER ASSEMBLY
POSITION
S
HEX BOLT ø8*25 16 PCS
USED TO CONNECT THE APRONS ASSEMBLY
POSITION
T
HEX BOLT ø8*35 12 PCS
USED TO FIX THE TOP RAILS AND APRONS ASSEMBLY
POSITION
U
HEX BOLT ø10*60 18 PCS
USED TO FIX THE TOP RAILS AND SLATE ASSEMBLY
POSITION
V
DOME WASHER M10*30*5 18 PCS
USED TO FIX THE TOP RAILS AND SLATE ASSEMBLY
POSITION
W
SIDE POCKET 4 PCS
X
MIDDLE
POCKET 2 PCS
ASSEMBLY
POSITION
Y
FLAT HEAD
SCREW
4.2*16 12 PCS
USED TO FIX THE LEATHER POCKET ASSEMBLY
POSITION

Customer Service
Global Merchants, Inc.
12 Lunar Drive
Woodbridge, CT 06525