Playmates Toys Spy Ninjas SN-12 User manual

CAUTION:
Toy contains UV light. Do not
stare directly into beam.
Size: 5.875” x 8”
Color: Black
Roll your
messages
and hide
inside.*
Remove cap for
real-working
ink pen.
Remove second cap for
invisible ink marker.
(Replace cap securely to
avoid drying out.)
HELPFUL HINT:
If Invisible Ink dries out:
• Turn Marker upside
down.
• Run Marker Tip under
water for 5 sec.
• Re-cap.
Let stand
for 15 min.
Press button.
Light will reveal
‘invisible’
message.*
SECRET MESSAGE
SPY PEN
Hey, Spy Ninjas. We have a new mission for you – send secret
messages without being detected by Project Zorgo!
You can hide this Spy Gadet in plain sight. It looks and works
like a regular ink pen - until you need to read, write or store a
top secret message. Keep this a secret between us Spy Ninjas.
Get communicating, and good luck!
© 2020 DAVCHY IP HOLDINGS, LLC
©2020 Playmates. Playmates International Company Ltd.
23/F, The Toy House, 100 Canton Road, TST, Kowloon,
Hong Kong. PRINTED IN CHINA.
Please keep all relative information for further reference.
Ages 6 and up
Item #41151
SN-12
Distributor - US Market Only
Playmates Toys Inc.
909 N. Pacific Coast Highway,
Ste 800 El Segundo, CA 90245
Email:
[email protected]
*The Spy Ninjas may have already included
some hidden messages! Use the light on your
Secret Message Spy Pen to see.
**Download additional
decoding activities at
SpyNinjasGadgets.com

If Secret Message Spy Pen is not working, try replacing the batteries.
To change batteries:
• Unscrew battery cap.
• Take out old batteries and replace with 3 new AG3/LR41 batteries.
• Replace battery cap.
Size: 11.75” x 8”
Color: Black
Battery Instructions:
• Non-rechargeable batteries are not to be recharged.
• Different types of batteries or new and
used batteries are not to be mixed.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Batteries are to be inserted with
the correct +and
- polarity.
• Exhausted batteries are to be
removed from the toy.
• The supply terminals are not to be short-circuited.
• Batteries are to be removed from
the toys when not in use.
• Do not dispose of batteries in fire.
• Do not use rechargeable batteries.
• For electric toys using rechargeable batteries,
the batteries should be charged under adult supervision.
• Batteries are only to be charged by persons of at least 8 years old.
Adult supervision is required to replace batteries.
Batteries Regulation: Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
Warning: Dispose of used batteries immediately. Keep new and used batteries away from
children. If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation. Under the environment with severe electrostatic discharge, the product
may malfunction and requires user reset.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help.