Plinius INSPIRE 880 Assembly instructions

The heart of music
www.pliniusaudio.com
Plinius Inspire Integrated Amplifi er
USB Driver Installation
The USB input of the Inspire 880 and Inspire 980 integrated amplifi er is supported by the following
operating systems:
• Windows XP – using the provided driver
• Windows 7 (32 and 64 bit) – using the provided driver
• Windows 8 (32 and 64 bit) – using the provided driver
• Windows 10 (32 and 64 bit) – using a driver built into the operating system
• MacOS (10.6.4 and later) – using a driver built into the operating system.
Windows 10 USB Driver Installation:
1. Connect the Inspire Integrated Amplifi er to your computer using a USB A to USB B cable.
»Power up the Inspire Integrated Amplifi er and select the USB input. The XMOS Audio 2.0 drivers will
install automatically.
2. Wait a few minutes to allow the installation to fi nish.
»Installation progress and confi rmation can be viewed in Settings > Devices > Connected Devices

The heart of music
www.pliniusaudio.com
Plinius Inspire Integrated Amplifi er
USB Driver Installation
Windows 10 USB Driver Installation (Continued):
3. Open the Control Panel and open Sound to select the Inspire Integrated Amplifi er’s USB
input as your computer’s active audio output.
»Select the Playback tab and click on XMOS USB Audio.
»Click on Set Default.
The Inspire Integrated Amplifi er will now be selected automatically as the active audio output when it is
connected and out of standby. When the Inspire Integrated Amplifi er is in standby or not connected, your
standard audio hardware will be active.