Pls Hr 1000 User manual

PLS HR 1000

OPERATING

MANUAL

PACIFIC LASER

SYSTEMS

The Professional Standard

TABLE OF CONTENTS INTRODUCTION

Introduction........................................Page 1

Safety Information .............................Page 2

Batteries ............................................Page 3

Keypad ..............................................Page 4

Functions ..........................................Page 5

Applications ....................................Page 6,7

Checking Calibration..........................Page 7

Specifications.....................................Page 8

Warranty.............................................Page 9

PLS HVD 505R Detector............Page 10,11

1

ROTATION HEAD

RE-CHARGING PLUG

KEYBOARD

EXIT WINDOWS

HANDLE

The PLS HR 1000 is a self-leveling laser

used for exterior horizontal layout. The

rechargeable NIMH battery pack contains

micro-controlled charging technology. The

HR1000 may also be used with alkaline

batteries in an optional separate battery pack.

CAUTION: DO NOT ATTEMPT TO CHARGE

STANDARD ALKALINE BATTERIES OR

WARRANTY WILL BE VOIDED.

The instrument is water resistant and may be

used in light rain, if necessary. Unit may not be

submerged in water.

SAFTEY INSTRUCTIONS

Safety instructions

Laser Safety

The PLS HR 1000 is a class IIl laser accord-

ing to 21CFR1040. Follow the instructions on

the warning labels which are shown in the

following illustrations:

Do not remove the attached warning labels.

The manufacturer and its dealers are not

liable for any defects and the consequences

from this removal.

! Attention ! The internal laser sources

comply with laser classes II and III. Do

not disassemble the instrument. In case

of inappropriate repairs, laser radiation

may arise in excess amounts of the marked

labels and liability may be incurred if there

is damage. In cases of inappropriate

processing, malfunctions are possible

without external visible damage.

DO NOT ATTEMPT TO CHARGE

STANDARD ALKALINE BATTERIES.

Attention: This instrument contains NIMH

rechargeable batteries. Batteries must be

recycled or disposed of properly.

WEEE-Reg.: DE23874031

The PLS HR 1000 uses rechargeable

NIMH batteries.

For on-board chargeable battery, insert

the battery re-charger receptacle plug in

the charging panel outlet of the battery

cover back.

Insert converter's AC receptacle plug in an AC

outlet and insert the converter's DC receptacle

plug in the charging panel's

DC outlet.

When the charging lamp is on, charging

is in process.

When the charging lamp is green, charging is

completed.

NOTE: The charging process takes approxi-

mately 7 hours to complete for rechargeable

batteries.

AC/DC

converter's

suitable power

range:

50-60Hz;

voltage

85V-265V.

If it is necessary to replace the NIMH battery,

the battery chamber may be removed by

turning the lock washer on the battery

chamber. Purchase replacement battery

chamber from an authorized PLS dealer.

Use PLS HR 1000 with caution in humid

or wet weather conditions. Do not put the

laser back into the case unless it is

thoroughly dry. Condensation may corrode

the battery connections and/or cause

distortion of beams in lighthouse.

2

BATTERIES

3

DANGER

LASER RADIATION

DO NOT STARE INTO BEAM OR VIEW

DIRECTLY WITH OPTICAL INSTRUMENTS

MAX OUTPUT POWER <1MW

WAVELENGTH 635-670NM

CLASS III A LASER PRODUCT

PLS HR 1000 LASER POWER:

635 NM <5MW LASER CLASS III

PLS HR 1000

Laser Power:

635 nm

<5mW

Laser Class lll

Standard NIMH

Re-chargeable

Battery Pack

Optional Alkaline

Battery Pack

FUNCTIONS

KEYPAD OPERATION

FUNCTIONS AND INDICATORS

1) Power switch: turn on or off unit.

2) Power light: red light, power on.

3) Low Battery lndicator: LED blinks,

the battery should be charged or replaced.

4) Tilt or ADS (automatic drift system) blinks

slowly when active, blinks quickly to warn

user of a change in alignment from original

set up.

45

3) LOW

BATTERY

INDICATOR

4)TILT

OR

ADS

1) POWER

SWITCH

ON/OFF

2) POWER

LIGHT

Press 1 (See keypad chart) The unit

is self-leveling and power light is lit. Press

the key again and the unit will turn off.

Rotation Mode

After laser has automatically leveled, the

laser beam stops blinking. The laser will

rotate at 1000 r.p.m. If the gradient exceeds

±5º, the laser will not rotate.

NOTE: If the unit does not level within 5

minutes, it will shut off.

Automatic Drift System

Press 4. Press the TILT key, the power

indicator blinks slowly. After the instrument

has leveled automatically for about 3

seconds, the ADS function is activated.

The power indicator will blink quickly, and

automatic leveling function shuts off when

the instrument is disturbed by external

circumstances. At the same time, the laser

module will stop scanning and start blinking.

Power switch

APPLICATIONS

Turn the

instrument

on. The

leveling

LED is flashing and the instrument

is self leveling. If the LED lights continuously

the rotary head starts and the laser beam will

be turned on. Attach the PLS HVD 505R

Detector at this reference point on a rod and

move this height to zero. Now the respective

difference in levels to the reference height

can be measured on the ground. It is useful

to use a flexible rod to measure positive and

negative values simply.

6

CHECKING CALIBRATION

7

Height

Transfer

(Leveling)

.................................................. The PLS HR 1000 should be checked, like

all measuring instruments, before use. Set

the PLS HR 1000 on a stable surface. Turn

the laser on and let it level. Mount the PLS

HVD 505R Detector at a fixed distance, e.g.

at 90 feet, and move it onto the laser plane.

Now turn the instrument around to each 90°

point and let the instrument level. In each

case, measure the difference to the first

height. If the deviation is smaller than 3/32

inch, the instrument is within the specifica-

tion. In the case of larger deviations the

instrument has to be calibrated.

ROTARY SPECIFICATIONS

8

WARRANTY

9

PLS HR 1000:

Accuracy: +/- 3/32 inch @100 feet

2.4mm @ 30meters

Leveling range: ± 5º

Operation range: Radius +/- 1000 feet

w/detector

304 meters

Rotation speed: 1000 rpm

Light source: laser diode,

wavelength 635nm, <5mW

Operating Temp: 4º F (-15C) to

122º F (50º C)

Storage Temp: -22º F(-30º C) to

140º F (60º C)

Laser Class: lll

Power supply: NIMH Batteries Pack

Optional- Alkaline

Battery Pack

Operating time: approximately 20 hours

Charging time: maximum 7 hours

(NIHM ONLY)

Protection grade: IP65 (Water- resistant),

not submersable

Size / Weight: 7.5 inch x 8 inch x 6 inch

190.5mmx200mmx152mm

4.9 lbs (unit only)

2.22 kg

Charger LDG 2+2:

Input: AC 100VAC-240VA

Output: DC 5.6V 700mA

Design and specifications are subject to

change without prior notice.

In the event of a claim please contact your PLS

dealer or PLS. Attempts at repair or detectable

improper treatment will void any warranty claim.

Please use the original transport case for ship-

ment.

This product is warranted by PLS •Pacific

Laser Systems to the original purchaser

to be free from defects in material and

workmanship under normal use for a period

of two years from the date of purchase. During

the warranty period and upon proof of purchase,

the product will be repaired or replaced (with the

same or similar model at our option) without

charge for either parts or labor through PLS.

The purchaser shall bear all shipping, packing

and insurance costs. Upon completion of the

repair or replacement, the unit will be returned

to the customer, freight prepaid. The warranty

will not apply to this product if it has been

abused or altered. Without limiting the forego-

ing, battery leakage, dents or gouges to the

plastic housing, broken optic windows, damage

to the switch/LED membrane are presumed to

result from misuse or abuse. Tampering with or

removal of the caution or certifications labels

voids this warranty.

Neither this warranty nor any other warranty,

express or implied, including implied warranties

of merchantability, shall extend beyond the

warranty period. No responsibility is assumed

for any incidental or consequential damages.

This warranty gives you specific legal rights,

and you may have other rights which vary

from state to state.

Model: KD500-CV

PLS HVD 505R DETECTOR

10 11

1. SPECIFICATIONS

Available Distance: From rotary PLS HR 1000 (2.0

ft.)Accuracy: Precise detecting: +

_1mm ( +

_0.04in)

Rough detecting: +

_2mm ( +

_0.08in)

Detecting Indication: Bi-surface LCD, buzzer

Power: DC9V alkaline battery

Automatic Power-off Time: Approx. 20 minutes

Working Temperature: -20 Coto +50Co(-4oF to +122oF)

Dimensions: 135 (L) X 65 (W) X 24.5 (H)mm

6" x 2-3/4" x 1"

Weight: 0.15kg (0.44lbs) (with battery)

2. LCD Rough Detecting

Reference Position

Display:

Precise Detecting

Reference Position

Display:

Higher than

reference

(fast

frequency

beep)

In reference

line (long

beep)

Lower than

reference

(slow

frequency

beep)

Poor Power: Buzzer On:

Buzzer Off:

Buzzer ON/OFF

Once power on,

default of

buzzer is on)

Laser

Receptor

LCD (Both on

Front Shell &

Back Shell)

Detecting

Mode

Buzzer

Mark

44mm

1 3/4 Inches

3. PANEL

Power

Switch

PLS HVD 505R DETECTOR

PLS NOTES PLS NOTES

________________________________

PACIFIC LASER

SYSTEMS

The Professional Standard

PACIFIC LASER SYSTEMS

2550 KERNER BLVD.

SAN RAFAEL, CA 94901

WWW.PLSLASER.COM

1 800 601 4500

PLS HR 1000 User manual

Popular Measuring Instrument manuals by other brands