PNH 600 Series User manual

BAIN MARIE
600 SERIES:
700 SERIES:
900 SERIES :
USER MANUAL
600 SERIES 700SERIES 900 SERIES

TECHNICAL SPECIFICATIONS
(MODELS)
☞
KESB-4060
KESB-4070
KESB-8070
KESB-4090
KESBD-8090
(mm) (SİZES)
400x620x300
400x740x300
800x740x850
400x900x850
800x900x850
(TOTAL
ELECTRICITY
POWER)
1,5
1,5
3
1,5
3
(VOLTAGE)
220 - 240
220 - 240
220 - 240
220 - 240
220 - 240
(Hz)
(FREQUENCY)
50
50
50
50
50
(ºC)
(TEMPERATURE)
30-120
30-120
30-120
30-120
30-120
(POWER
SUPPLY
CABLE)
3 X 2,5
3 X 2,5
3 X 2,5
3 X 2,5
3 X 2,5
(CAPACİTY)
GN 2/3
GN 1/1-150
2xGN 1/1-150
GN 1/1-150
2xGN 1/1-150
(CLASS)
1
1
1
1
1
(PRETECTION
CLASS)
IP 21
IP 21
IP 21
IP 21
IP 21
(Kg)
(NET WEIGHT)
20
30
50
60
80

600 SERIES BAIN MARIE
643 SERIES BAIN MARIE
674,61
620
110,16 389,78
400
25 350 25
900 SERIES BAIN MARIE
945 SERIES BAIN MARIE
61,33
930
545
106,5
400
8,4
71,53
690,46
72,5
255
72,5
985 SERIES BAIN MARIE
61,33
930
545 106,5
800
8,4
71,53
690,46
72,5
655
72,5
911,33
911,33
439,9
300
850
719
850
719
148,7
131
131
986,21
265
986,21
850
300
719
850
265
719

700 SERIES BAIN MARIE
743 SERIES BAIN MARIE
61,33
795
740
120
400
65
525
20,5 359 20,5
61,33
795
740
783 SERIES BAIN MARIE
800
65
525
20,5
759
20,5
745 SERIES BAIN MARIE
61,33
740
355
106,5
400
8,4
69,8
500,4
72,5
255
72,5
61,33
740
355
106,5
785 SERIES BAIN MARIE
800
8,4
69,8
500,4
72,5
655
72,5
400
364,3
364,3
911,33
911,33
850
719
273
273
850
719
131
131
303
303
850
303
273
850
303
273
719
719

PRESENTATION
Dear User,
We thank you for having preferred our device and having relied on our company. Our
devices are being used in industry kitchens in 75 countries together with you.
Ourdevicehasbeenproducedinaccordancewithinternationalstandards.Westrongly
remind you that you read the instruction book, have your user read it to get the highest
eu,ciency from the device matching your expectations and to use it for a long term. we
ask you to take into consideration the following warnings before calling our service.
* Pleasereadtheinstructionbookbeforeinstallingandusingthedeviceandensurethat
people using the device read it. if you turn on the machine without reading the
instruction book, the device shall be out of the scope of the warranty.
* The instruction book, giving information on assembly use and maintenance of the
product bought has to be read carefully. Ensure that the electrical installations onto
which the device will be connected are prepared in accordance with legal legislations by
qualified personel before appearance of our authorized service personel for assembly of
the device.
* Get help from the nearest authorized service for issues over which you hesitate.
* Weremindyouthattherelevantcostsandthefeeforeachhourof staywillbeinvoiced
to you if the service personel called for assembly is kept waiting.
* We hope that you get the highest eflciency from our product...

TRANSPORTATION AND RELOCATION
☞The device has to be located on the pallet in a vertical position using man
power.
☞The device shall be transported by placing the forklift feet under the device.
☞If the transportation distance is long, the staff members have to act slowly; if necessary,
the device has to be fixed onto the pallet against vibrations or its stability has to be
maintained by a person.
☞Do not strike or drop the product during transportation.
ASSEMBLY OF THE DEVICE
☞The feet of the device have to be adjustable and it has to be ensured that the device is
operable on a scale basis.
☞Electrical connection of the device has to be checked by a qualified electrician and has to
be connected to a fuse, which is at a height of 170 cm from the ground at maximum.
☞Electrical connection has to be made by placing a leakage current fuse of 30 mA
onto a supply fuse against leakage current risk.
☞It has to be ensured that the device is earthed by connection of the
electrical installation of the device to the earthing bar at the closest panel.
In order to locate the device near to a wall and partition, kitchen furniture,
decorative coating etc., the said items have to be made of nonflammable
material or coated with an appropriate thermal insulation material in which
case the distance in-between has to be 5 cm or otherwise 20 cm at
minimum. It is recommended that fire protection rules are attached special
importance.

SAFETY RELATED DETAILS
☞ The device has by all means be operated under ventilation hood.
☞ In the area, where the device operates, no solid or liquid
combustible materials (garments, alcohol and derivatives,
petroleum chemicals, wood andplastic materials, curtains etc.)
should be given place.
☞ Do not clean with pressurized water.
☞ You can use our devices together with our devices of
the same series.
☞ This device has to be installed in accordance with applicable
regulations and has solely be used at well-ventilated locations.
Apply to instructions before installation and use of the device.
☞ The device has been produced for the purpose of
industrial use and has to solely be used by the personnel,
who have been trained for the said device.
☞ The device should not be intervened in by persons out
of the producer or the authorized service.
☞ In case of fire, blazing in the area, where the device is used,
turn off the gas valves and electric switchgears (if any) without
getting into panic and use a fire extinguisher. Never use water to
extinguish flames.

USE OF THE DEVICE
Bain-marie is used for the purpose of keeping the warm food ready for service at
touristic facilities, restaurants, fast foods, hotels, cafes etc. Benmari isadevicethrough
which the food products are heated with the steam produced inthe pool. The exterior of
the device has to be cleaned with a cloth squeezed after being applied warm soapy
water before the first use.
NOTE: Do not go out of the intended purpose.
The device has to be used by a person, who is aware of safety and technical
terms and who has read the instruction book.
TURNING ON THE DEVICE
Fill water into Bain marie p
-ool with least hardness level.
Turn on the start-stop switch and bring the adjustable thermostat to 90ºC (upon
which the green light will beon). Whenthe water temperature arrives at90°C, the
thermostat light will go off.
Fill in the food stuffs into the gastronom pre prepare- d containers for service and place them on
the device.
Bring the thermostat to “0” position in order to turn off the device. Then turn off on-top switch.
After turning off the device, the gastronom containers shall beremoved and cleaned.
The water in the pool shall be discharged off by a faucet under the panel using a
separate container. It should be kept in mind that the discharged water is hot and
you have to be careful during this action.
Itisrecommended thatthedeviceisoperatedatenvironment conditions of a
temperature range between -5 ºC and +40 ºC and humidity rate of 65 % at
maximum.
CAUTION!
DO NOT TURN ON YOUR DEVICE WITHOUT CONNECTING IT TO
THE GROUND LINE.
CAUTION!
Do not turn on the device if there is no water in the pool.
Otherwise the poolbase may become deformed and may change
color.

USE OF THE DEVICE
CAUTION! : Attention has to be given to the fact that the
device is installed and operated as told in assembly and usage
instructions. In case of any breakdowns, inform our nearest
authorized service.
IN CASE OF A BREAKDOWN OF THE DEVICE, THE INTERVENTION
AUTHORITY SHALL SOLELY BE ON THE PART OF COMPANY
AUTHORIZED SERVICES. IF ANY TECHNICAL STAFF MEMBER OR
UNQUALIFIED STAFF MEMBER OUT OF THE AUTHORIZED
SERVICES INTERVENES IN THE DEVICE, THE DEVICE SHALL BE
OUT OF THE SCOPE OF THE WARRANTY. ON THAT ACCOUNT, BY
NO MEANS PERMIT ANY UNAUTHORIZED PEOPLE TO INTERVENE
IN THE DEVICE. UNDER SUCH CASES, THE MANUFACTURING
COMPANY SHALL BY NO MEANS BE HELD LIABLE. USE OF
UNORIGINAL SPARE PARTS SHALL NOT BE OFFERED TO OUR
AUTHORIZED SERVICES IN THE COURSE OF SERVICE FOR ANY
REASON. SUCH UNORIGINAL PARTS, ASSEMBLED TO THE
DEVICE BY ANY MEANS, SHALL MAKE THE DEVICE OUT OF THE
SCOPE OF THE WARRANTY.

CLEANING AND MAINTENANCE
1.CLEANING:
Before and after the first and every following use of the device, the containers placed in
the device shall be removed; the water, if any, shall be discharged. Clean the exterior and
water chamber, containers of the device with a sponge and cleaning materials. Do not
use CHEMICAL CLEANING MATERIALS such as marine acid, cif etc. for cleaning.
2.MAINTENANCE:
The periodical maintenance has to be applied by a technical staff member.
We recommend that maintenance is applied on a semi-annual basis at
maximum depending on frequency of use. Maintenance of the device by
our authorized service staff members shall be charged even within the term
of the warranty.
LIFE TIME OF THE DEVICE
The life time of the device is 10 years if it is used under recommended terms of use.

TERMS OF WARRANTY
1- The documents without sales date, plant and selling company confirmation on them shall be invalid. The
warranty deed shall be presented for gaining benefi,t from the terms of the warranty. The device has been
warranted against breakdowns to stem from material and workmanship defects on condition that it is
assembledandusedaccordingtothe instructionbookon assembly, useandmaintenance. Establishment
way of elimination and designation of the exact place of the breakdeowns within the scope of the warranty
shall be assumed by COMPANY.
2- The warranty givenshall solely apply forthe warrented deviceif the instructionbookon assembly, use
and maintenance and the terms of warranty are abided by ; no right or compensation may be claimed by
any means other than this.
3- if any scrapings, erasures or changes are done on the information indicating the type, the model and
serial numbers of the device in the deed of warranty or on the warranted device, the warranty shall be
inmvalid.
4- The warranty solely consists of material and relationship defects to arise during applicable times and
maintenance and repair of the relevant berakdowns. The breakdowns and the parts within the scope of
thew warranty shall be repaired and replaced free of charge. Ownership of the parts replaced shall be held
by COMPANY
5- Solely the serivce stau members authorized by the COMPANY can intervene in the breakdowns during
the term of the scope of the warranty. Intervention of unauthorized people shall make the device out of the
scope of the warranty.
6- Assembly hasto be made byauthorized service personel and information has to begiven to the service
in case of change of the place of use of the device.
7- In case of any breakdowns during the use, information has to be given to the authorized service.
8- Elimination of damages and breakdowns to arise during loading ,unloading and shipment operations
outofresponsibilityof COMPANYshallbe deemed out of the scope of the warranty. Likewise, elimination
of damages and breakdowns to arise due to exterior factors during use of the deviceshall be out of the
scope of the warranty as well.

643 - 743 - 745 - 945
SERIES BAIN MARIE
783 - 785 - 985
SERIES BAIN MARIE