PNI PMR R15 User manual

PNI PMR R15
Professional portable PMR Radio / Професионално
преносимо радио PMR / Professionelles tragbares
PMR-Radio / Radio PMR portál profesional / Radio PMR
portable professionnelle / Professzionális hordozható PMR
rádió / Radio PMR portale professionale / Professionele
draagbare PMR-radio / Profesjonalne przenośne radio PMR
Stae radio portabila profesionala PNI PMR R15
EN User manual ......................................................... 2
BG Ръководство за употреба ............................. 8
DE Benutzerhandbuch .............................................. 14
ES Manual de usuario ............................................... 20
FR Manuel utilisateur ............................................... 26
HU Használati utasítás .............................................. 32
IT Manuale utente .................................................. 38
NL Handleiding ........................................................ 44
PL Instrukcja obsługi ............................................... 50
RO Manual de utilizare ............................................. 56

PNI PMR R15
Professional portable PMR Walkie Talkie
User manual

3
Product description:
1
2
3
4
5
6
7
8
9
10
11
1. Antenna (not removable)
2. LED indicator. The LED turns red when the radio emits and green
when the radio receives. Also, when the battery is discharged, the
red LED flashes.
3. Speaker
4. Microphone
5. On/o and volume control.
6. Channel selector (1-16)
7. PTT (Push to Talk). Press to transmit. Release to receive.
8. Channel monitoring, squelch deactivation. Allows reception of
weak signals.
9. Enable/disable channel scan function. Each time you press this
key, you will receive the voice confirmation “Scanning ON“ or
“Scanning OFF“
10. 2-pin type PNI headphone connector
11. Rechargeable battery

4
Functions and usage instructions
Tunr the radio on/o and Volume control
Rotate the knob [5] clockwise to turn the radio on. The radio will
vocally announce the current channel number. Continue rotating
right or left to adjust the volume to the desired level.
Rotate the knob [5] counterclockwise to turn the radio o.
Transmission/reception
Press the PTT key to transmit. The red light will turn on. Talk towards
the radio’s microphone. Release the PTT key to receive.
Channel scan
Press the key [9] to activate the channel scan function. The radio will
scan all 16 channels and stop on the channel on which it receives a
signal. After the signal disappears, the radio will resume the scanning
process.
Monitor function
Press the key [9] to monitor the current channel. Thus, the squelch will
be deactivated and you will be able to listen on the selected channel
if someone emits. If no one emits, you will only hear the background
noise.
Squelch
By default, the squelch is active and is set to level 3 (from a maximum
of 9 levels).

5
Time out Timer
This function limits the transmission time to prevent a channel from
being occupied for a long time. By default, the radio allows a maximum
transmission time of 60 seconds.
Energy saving
This function reduces power consumption when no signal is received
or when no operation is performed (no key is pressed) for 10 seconds.
When the radio receives a signal or a key is pressed, the battery saving
function is automatically deactivated.
Low battery warning
When the battery of the radio is discharged, the red LED will flash and
you will be warned vocally.
To charge the battery, position the radio in the charging cradle
included in the package. During charging, the red LED on the base
stays on and will turn green when the battery is fully charged.
Technical specifications
General
Frequency PMR 446MHz
Channels 16
Output power 0.5W
Power supply Li-Ion battery 7.4V 1200mAh
Dimensions 114 x 59 x 34 mm (without antenna)
Antenna length 100 mm
Impedance antenna 50 Ω

6
Weight 190 g (battery included)
Working temperature -26°C ~ +60°C
Transmission
Frequency stability ± 2.5PPM
Carrier output ≤ 5W
Modulation limit ≤ 5KHz/2.5KHz
Frequency distortion ≤ 3%
Modulation +3dB ~ +3dB
Adjacent power ≥ 65dB
Spurious frequency
components
≤ 7.5µW
Busy bandwidth ≤ 16KHz
Reception
Sensitivity < 0.2µV
Frequency distortion ≤ 3%
Audio frequency response +2dB ~ -10dB
Adjacent channel
selectivity
≥ 60dB
Spurious response
rejection
≥ 65dB
Safety warnings
• Do not open the radio cover and do not repair the radio by
yourself. In case of failure, call a specialized center.
• The device generates interference that may aect the operation
of televisions or radios. In case of interference, take the radio
away from the aected device.
• Do not touch the antenna while transmitting.
• In order not to damage the radio, do not emit for a too long
period.
• Do not use the radio in environments with corrosive or flammable
substances.

7
Troubleshooting
Problem Possible cause and solution
The radio does not turn on
The battery may be discharged.
Charge the battery.
The battery may not be installed
correctly.
Reinstall the battery.
The battery discharges quickly
after full charge
Battery life has expired. Replace
the battery with a new one.
You are not heard by others
when you emit or you do not
receive the others
Make sure you use the same
frequency and the same channel
as the other participants.
The other participants may be
out of range of the radio.
Simplified EU declaration of conformity
SC ONLINESHOP SRL declares that the PNI PMR R15 portable
radio is in accordance with the RED Directive 2014/53/EU. The full
text of the EU Declaration of Conformity is available at the following
internet address:
https://www.mypni.eu/products/7922/download/certifications

PNI PMR R15
Професионална преносима радиостанция
Ръководство за употреба

9
Представяне на продукта:
1
2
3
4
5
6
7
8
9
10
11
1. Фиксирана антена (не се отделя)
2. Лед индикатор. Светодиодът става червен, когато
станцията излъчва, и зелен, когато станцията приема.
Също така, когато батерията е изтощена, червеният
светодиод мига.
3. Говорител
4. Микрофон
5. Включване/изключване на станцията и контрол на силата
на звука.
6. Селектор на канали (1-16)
7. ПТТ (Push to Talk). Натиснете, за да излъчвате. Пуснете,
за да приемате
8. Мониторинг канала, деактивиране squelch. Позволява
приемане на слаби сигнали.
9. Активиране/деактивиране на функцията за сканиране
на канали. Всеки път, когато натиснете клавиша, ще
получите гласово потвърждение “Сканиране ВКЛ.” Или
“Сканиране ИЗКЛ.”
10. 2-пинов конектор за слушалки тип PNI
11. Батерия

10
Функции и инструкции за употреба
Включване/изключване на станцията и контрол
на силата на звука
Завъртете копчето [5] по посока на часовниковата стрелка,
за да стартирате станцията. Станцията ще обяви гласово
текущия номер на канала. Продължете да въртите надясно
или наляво, за да регулирате силата на звука до желаното ниво.
Завъртете копчето [5] обратно на часовниковата стрелка, за да
спрете станцията.
Предаване/приемане
Натиснете клавиша ПТТ, за да излъчвате. Червеният светодиод
ще светне. Говорете в микрофона на станцията. Отпуснете
клавиша ПТТ, за да приемате.
Сканиране на канал
Натиснете клавиша [9], за да активирате функцията за
сканиране на канали. Станцията ще сканира всички 16
канала и ще спре на канала, по който получава сигнал. След
изчезването на сигнала станцията ще възобнови процедурата
за сканиране.
Функция Мониторинг
Натиснете клавиша [9], за да наблюдавате текущия канал.
По този начин шумоподтискането ще бъде деактивирано и
можете да слушате избрания канал, ако някой излъчва. Ако
никой не излъчва, ще чуете само фоновия шум.
Squelch
По подразбиране шумоподтискането е активно и е настроено
на ниво 3 (от максимум 9 нива).