PoeWit OS-1 User manual

poewit.com
QUICK START GUIDE
OS-1 MODEL
CLOUD INTELLIGENT
LED FLOOD LIGHT
POWERED BY PoE

poewit.com
INSTALLATION AND SETUP
1
BEFORE YOU START
1) PACKAGE CONTENTS
1. (OS1-PT-X) PoE Powered LED Flood Light (Type 4, 802.3bt,
90W max.) w/ Dual PoE Output (PoE Type 2, 802.3at, PoE+, 30W
max.)
-or-
PATTERN
ITEM
QUANTITY 1
Quick start
1
PoE Powered LED
Flood Light
OS-1-PT-X
PATTERN
ITEM
QUANTITY
OS-1-PT-X PoE
Powered LED
Flood Light

poewit.com
INSTALLATION AND SETUP
2
1. (OS1-X) PoE powered LED flood light (PoE Type 2, 802.3at,
PoE+, 30W max) OS1 model does not provide pass-through
output ports.
2. Hardware accessories bag
- Mounting bracket
- Adhesive-backed sealing pad
- Mounting screws (x2) with screw caps
Note: OS1-X model has mounting bracket, sealing pad and
mounting screws integrated together (screws caps remain
separate)
3. Quick start guide
PATTERN
ITEM
QUANTITY 1
Quick start
1
PoE Powered LED
Flood Light
OS-1
PATTERN
ITEM
QUANTITY
OS-1 PoE
Powered LED
Flood Light

poewit.com
INSTALLATION AND SETUP
3
2) PRODUCT DESCRIPTION
2-A. PoEWit PoE powered flood light can be mounted on wall or
ceiling. It is water-resistant and provides cloud-connectivity for
PoEWit mobile application control (dimming, schedule, on/off)
and/or wall-switch control (on/off) via iOS or Android.
2-B. Unique construction with dual LED lights provides 180
degrees of adjustable coverage. No AC power is required.
(Model OS1-PT-X only) Dual PoE outputs provide power and
data connectivity for camera, PoEWit MD-01 motion detector or
PoEWit light fixtures.
2-C. Dimensions – for model OS1-PT and OS1
Fig 1 OS1-PT-X
155mm (6.10in)
290mm (11.41in)
155mm (6.10in)
131mm (5.15 in)
131mm (5.15in) 290mm (11.41in)

poewit.com
INSTALLATION AND SETUP
4
3) INSTALLATION AND WIRING
1.Selectaproperlocationforlightxtureandotherconnecteddevices
2. Install an Ethernet cable (CAT5/6) from your PoEWit PoE
Switch to the location selected for flood light installation.
3. If installing other PoE devices utilizing the PoE outputs (OS1-PT-X
only), install ethernet cable to location of other devices that will
utilize PoE outputs from the OS1 installation location.
4. Install mounting screws (x2) into the mounting bracket as shown.
Install PoEWit sealing pad against wall/ceiling opening and then
mounting bracket to expose ethernet cable for Internet
connection (router, switch, broadband modem) and other PoEWit
240mm (9.47in)
134.87mm (5.31)
125.73mm (4.95in)
134.36mm (5.29in)
134.36mm (5.29in)
125.73mm (4.95in)
134.87mm (5.31in)
240mm (9.47in)
Fig 2 OS1-X

poewit.com
INSTALLATION AND SETUP
5
connected devices.
Note: PoEWit model OS1-X does not require bracket or sealing
pad assembly
Figure 3 OS1-PT-X Install
Figure 4 OS1-X Install

poewit.com
INSTALLATION AND SETUP
6
5. Ensure Ethernet cable is extended approximately 7 inches beyond
wall opening for OS1-PT-X and 3 inches for model OS1-X.
6. Plug PoE-enabled rthernet cable into flood light at location
indicated (PoE Input). Verify input RJ45 GREEN LED illuminated showing
PoE power and AMBER LED showing local network connectivity.
Cloud connection is required for initial setup of the device.
Figure 6 OS1-PT-X
Input Cable Install
Figure 5

poewit.com
INSTALLATION AND SETUP
7
7. PoEWit system LED will illuminate WHITE upon initial start-up
and then display BLUE when cloud connectivity is available
8. If installing model OS1-PT, connect PoE+ outputs to respective
ethernet cables before placing fixture onto mounting bracket
9. Attach Flood Light to mounting plate via supplied screw caps
(see Figure 3)
10. Adjust dual LED lights for required coverage
11. Continue to quick start guide for other devices connected to
PoE output ports

poewit.com
INSTALLATION AND SETUP
8
3) CONFIGURATION INSTRUCTIONS
Power up the device and you should be automatically connected
to the internet. You are now ready to download and install our App.
You can search PoEWit in the Apple App Store or Google Play to get
the App.
NOTE: Your device and mobile phone both must have an internet
connection through the same external IP address and must be
on the same local subnet.
 Afterinitialconguration,aPoEWitwallswitchand/orPoEWit
motion detector PIR can control the lights should the internet
conection go down.
© 2020 PoEWit Technologies