Updated November 1, 2018
Bluetooth® Pairing
You can link (pair) compatible devices, e.g. most smartphones, with your POGS Bluetooth®
headphones via Bluetooth®. The audio output of your smartphone can then be heard with the
POGS Bluetooth®.
To pair your POGS Wireless headphone press the Bluetooth® pairing button (#4) for
approximately 5-7 seconds. The LED light will start flashing a blue (1 sec) and a white light
(1sec). This means that your POGS headphone is ready to be paired to a device.
Activate the Bluetooth® function on your external device (e.g. smartphone is used below as
example).
Let your smartphone search for Bluetooth® devices (you can find more information in the
instruction manual of your smartphone).
“My POGS Wireless Headphones” should appear in the list of detected devices after the
search run.
Select “My POGS Wireless Headphones” from the list of detected devices.
Pairing is now complete and your POGS Bluetooth® are linked to your smartphone. The
LED will illuminate in blue once every 7 seconds for 1 second which means your POGS are
connected.
Your POGS will now play back all sounds that would otherwise be played by your
smartphone.
To end the Bluetooth® connection, you can either turn off the Bluetooth® function on your
smartphone or slide the power off button (#2) on your headphone.
Reconnecting to a paired player
If your POGS Bluetooth® has already been connected with your smartphone or another
device, your POGS headphone will automatically reconnect to the device when Bluetooth®
is switched on on both your POGS and your smartphone.
