POLA HP19a User manual

4.0
13.08.08
O.C. = 1, S.C. = 2 100Ω = 3, 200Ω = 4
A
- shown for n.SEt=1,
(n.SEt=2,3,4 shows ‘x’ set on/off alues)
External set point select

Mess. Value Meaning Note
tinE =2 Base time unit *1
cntd =0 =0: display count-up. =1: display count-down
tYPE =1 Working mode *2
LOGO =1 =0: power-on>works. =1: LOGO: HP19: SL4.0: PASS (2 sec)
SECU =0 =0: NORMAL. =1: keys command and setting inhibited
n.SEt =1 =1: Set 1. =2: Set 2. =3: Set 3. =4: Set 4
t.on.1 10” As Timer key set (needed if SECU=1)
t.oF.1 20” As Timer key set (needed if SECU=1)
t.on.2 30” As Timer key set (needed if SECU=1)
t.oF.2 40” As Timer key set (needed if SECU=1)
t.on.3 50” As Timer key set (needed if SECU=1)
t.oF.3 60” As Timer key set (needed if SECU=1)
t.on.4 70” As Timer key set (needed if SECU=1)
t.oF.4 80” As Timer key set (needed if SECU=1)
n.PLS =1 Number of pulses (only for tYPE9)range 1..99