Primex OneVue Sync B100 User manual

Digital Code Blue Timer
Install Guide
OneVue Sync Bluetooth
Publication date July 20, 2020

Table of Contents
Specications: Sync Bluetooth™ Digital Clock/Timer .............................................................................. 3
Device specications ............................................................................................................... 3
Digital Clock/Timer 120 VAC power, weight, and dimension specications ......................................... 5
Install and operation overview: Sync Bluetooth Digital Clocks & Timers ...................................................... 6
About Sync Bluetooth Devices ................................................................................................... 6
Add a Clock Mode .................................................................................................................. 6
Post-install operation .............................................................................................................. 7
Install Digital Clock/Timer: Wall mount with tilt bracket ........................................................................... 8
Tilt bracket mounting dimensions .............................................................................................. 8
Assemble and mount to tilt bracket ............................................................................................ 9
Remove digital clock/timer from tilt bracket ............................................................................... 10
Digital Clock/Timer wall mount with keyhole installation ....................................................................... 11
Mounting dimensions ............................................................................................................ 11
Directly mount a clock/timer to the surface of a wall .................................................................... 12
Digital Clock/Timer dual-sided installation ......................................................................................... 13
Supplied components ............................................................................................................ 13
Mounting dimensions ............................................................................................................ 13
Assemble and mount a dual-sided digital clock/timer ................................................................... 14
Remove from dual mount bracket ............................................................................................ 15
Digital Clock/Timer ush mount installation ....................................................................................... 16
Supplied components ............................................................................................................ 16
Dimension specications ....................................................................................................... 16
Install ush mount clock/timer ................................................................................................ 16
Timer Control Switch installation ..................................................................................................... 19
Step 1 (code blue timer only): Wire timer to code blue system ........................................................ 19
Step 2: Attach timer to Timer Control Switch .............................................................................. 19
Step 3: Mount Timer Control Switch to junction box ..................................................................... 20
Operate a Code Blue Timer ............................................................................................................. 21
Code Blue Timer operation overview ......................................................................................... 21
Technical Support ......................................................................................................................... 23
Support through Primex Certied Sales and Service Partners ......................................................... 23
Primex Technical Support ...................................................................................................... 23
IMPORTANT SAFETY INSTRUCTIONS ............................................................................................... 24
REGULATORY APPROVALS ............................................................................................................. 25
RADIO STANDARDS SPECIFICATION (RSS) ........................................................................................ 27
European Union Declaration of Conformity and Restrictions .................................................................. 28
TWO YEAR LIMITED WARRANTY ..................................................................................................... 29
Page 2

Specications: Sync Bluetooth™ Digital Clock/Timer
Device specications
AC power supply 120 VAC (100-240)/ 50–60 cycle, 10 ft. (3.0 m) cord with two-prong plug, UL/cUL listed
Enclosure Enclosure: ABS plastic
Junction box: UL listed (UL 50E 1st Ed; listing number E469550)
Bluetooth® Wireless
Communication
Protocol
Bluetooth® Low Energy (BLE) Wireless Technology, version 4.1
Bluetooth Range: up to 100 ft. (30 meters)
Operation 12 or 24-hour time display
PM indicator light
Alternating time and date display option
LED digit dimmer option (100%, 75%, 50%, 25%)
Automatically adjusts for Daylight Saving Time (DST)
Clock connects to a Sync Bluetooth mesh network to send status, synchronize received
UTC time to its Time Zone offset and DST rules, and receive OneVue setting updates.
If power is interrupted, the clock stops until power resumes. Upon resumption of power,
the clock self-corrects to the current time. Retains time in memory for up to one hour.
Environment Operating temperature: 32° to 95° F (0° to 35° C)
Storage temperature range: -4° to 158° F (-20° to 70° C)
Certications FCC, CE, and IC compliant
Components specifications
The backside of a Levo Digital Clock/Timer houses the mounting, power, connection inputs, and setting panel.
Page 3

A. Key-Hole Mount (2)
B. AC power supply and power cord with 2-prong plug (AC model). Power cord strain relief assembly with supplied
washer and screw.
C. RJ45 port (PoE model)
D. RJ11 port (elapsed timer and code blue timer model): connection to supplied Timer Switch Control
E. 4 pin port (code blue timer model): connection to supplied 4 pin 30 in. (76.2 cm) connector
F. Setting panel (options vary by model): Mini-USB port, manual dimmer display button, Reset (check-in) button
Page 4

Digital Clock/Timer 120 VAC power, weight, and dimension specications
Digital Clocks/Timers are shipped from the factory with a power supply and power cord with a two-prong plug. The
power plug may be removed and the cord cut to length for hardwired (pigtail) installation. Pigtail installation requires a
120V~ power line in a junction box installed by a licensed electrician. Leave a minimum of 6 in. (15 cm) of cord inside
the junction box.
Specications
Clock Type Weight Max. Current Draw Height (A) Width (B) Depth (C)
2.5" (6.4 cm)
4-digit
1.8 lb (0.8 kg) 135 mA 5.0" (12.7 cm) 10.8" (27.3 cm) 2.2" (5.6 cm)
2.5" (6.4 cm)
6-digit
2.0 lb (0.9 kg) 170 mA 5.0" (12.7 cm) 13.8" (34.9 cm) 2.2" (5.6 cm)
4" (10.16 cm)
4-digit
3.9 lb (1.8 kg) 185 mA 8.0" (20.3 cm) 17.9" (45.5 cm) 2.4" (6.1 cm)
4" (10.16 cm)
6-digit
4.6 lb (2.1 kg) 205 mA 8.0" (20.3 cm) 23.3" (59.2 cm) 2.4" (6.1 cm)
Page 5

Install and operation overview: Sync Bluetooth Digital Clocks & Timers
OneVue Sync Bluetooth devices are designed to provide ease of installation, requiring no end user conguration, simply
take-out-of the box and install. The only operation dependency is its connection to an available Sync Bluetooth mesh
network.
About Sync Bluetooth Devices
• Each device is equipped with a Bluetooth Low Energy (BLE) Wireless Technology radio component that allows it to
establish a wireless connection to a Sync Bluetooth mesh network.
• Each device is identied by a unique Device ID, allowing it to receive its unique settings managed in OneVue, and
authenticate and connect to the mesh network.
• A Bridge is the only system device that connects to an Ethernet or Wi-Fi network. Upon its network connection, it
connects to a NTP Server to receive UTC time and checks-in to OneVue. During each check-in, it sends device data
received from its last connection to the mesh network and downloads any pending setting updates. Pending setting
updates are then transmitted to devices during its next connection to the mesh network.
Add a Clock Mode
Upon rst-power up at its installation location, a clock and repeater enters Add a Clock mode as described below.
1. Once powered on at its installation location, the device continuously searches for an available Sync Bluetooth
mesh network.
It may take up to 15 minutes for a device to authenticate and connect to an available mesh network. We
recommend to continue installing additional devices, while other devices establish their connection to the mesh
network.
2. Once a device has authenticated with the mesh network, it establishes a communication path either to another
Sync Bluetooth device or directly to a Bridge available within the mesh network.
3. Once connected, the device receives the New Clock Time Zone and sets its time. For an analog clock, its hands
perform one full revolution past 12:00 and then sets its time.
• During its rst connection to the mesh network, its unique Device ID is added to the mesh network.
• If a Bridge is in 8-hour deployment mode, within 30 minutes of receiving a new Device ID, the Bridge connects to
your facility's network and sends the new Device ID to OneVue. The new device is added to your OneVue
account.
• If a Bridge is not in 8-hour deployment mode, the new device is added to your OneVue account within 24 hours to
7 days.
4. When the Bridge connects to OneVue, the new device default settings are downloaded to the Bridge.
5. Upon its next connection to the mesh network, the Bridge automatically sends updated device settings received for
each device based on their Device ID.
Page 6

In summary, from the time a clock or repeater device is rst powered on at its install Location and connects to the
mesh network, it receives and sets its time within 15 minutes. If a Bridge is in 8-hour deployment mode, a new device is
added to your OneVue account within 30 minutes, and when not in 8-hour deployment mode it may take up to 24 hours
to 7 days.
Battery-operated clock only: When a clock cannot establish a connection to a mesh network to receive time, its
estimated battery life is reduced to 90 days.
Post-install operation
Once a Bridge has connected to OneVue and the Bluetooth clocks and/or repeaters have authenticated and connected
to a Sync Bluetooth mesh network, the devices operate as described below.
1. Once a day, at a system dened time, a Bridge connects to your facility’s network to receive UTC time from a NTP
Server and check-in to OneVue to download device setting updates.
2. Once a day, at a system dened time, each Sync Bluetooth device automatically establishes a wireless
communication path to either another device to build the Sync Bluetooth mesh network.
• Clock and repeater statuses are forwarded to a Bridge either by its communication path to another clock,
repeater or directly to a Bridge.
• Clocks and repeaters receive setting updates and synchronizes received UTC time to its Time Zone offset and
DST rules.
3. Once the Sync Bluetooth mesh network has completed its daily build, a Bridge connects to your facility's network to
send all received device status data to OneVue.
Page 7

Install Digital Clock/Timer: Wall mount with tilt bracket
A Digital Clock/Timer can be wall mounted at a 4° or 18° angle with use of the supplied tilt bracket.
Tilt bracket mounting dimensions
• Dimension D: Clock screw hole spacing.
• Dimension E: Distance to wall surface for 4° mounting bracket
• Dimension F: Distance to wall surface for 18° mounting bracket
• Dimension G/H: Mounting bracket screw hole spacing.
Dimension
Clock/Timer Model A B C D E F G H
2.5” 4-digit - 4° bracket 4.8” 10.6” 2.1” 6.0” 0.38” – 0.63” N/A” 8.0” 2.5”
2.5” 6-digit - 4° bracket 4.8” 13.6” 2.1" 6.0” 0.38” – 0.63” N/A 8.0” 2.5”
2.5” 4-digit - 18° bracket 4.6" 10.6" 2.2" 6.0" N/A 2.1" 9.5" 2.5"
2.5” 6-digit - 18° bracket 4.6" 13.6" 2.1" 6.0" N/A 2.1" 9.5" 2.5"
4” 4-digit wall mount 8.0” 17.9” 2.4” 14” 0.4 – 0.9” N/A 12.0” 4.0”
4” 6-digit wall mount 8.0” 23.3” 2.4" 14” 0.4 – 0.9” N/A 12.0” 4.0”
Page 8

Assemble and mount to tilt bracket
NOTE
Hardwired (pigtail) install: AC-powered clocks are supplied with a power cord with a two-prong plug.
The two-prong plug may be removed for a hardwired (pigtail) installation. Hardwired installation
requires a 120V~ power line in a junction box installed by a licensed electrician. Leave a minimum of 6
in. (15 cm) of cord inside the junction box. The tilt bracket has a center pass-through hole for the 120V~
pigtail. If a junction box is present, the tilt bracket has mounting holes spaced to allow direct
attachment of the tilt bracket to the junction box cover plate screw holes.
1. Mount the tilt bracket directly to the wall with the four #10 screws and anchors (supplied). To determine the
spacing of the screws, refer the mounting dimensions.
2. Latch the clock onto the tilt bracket. The top latch position determines the tilt degree.
Page 9

Remove digital clock/timer from tilt bracket
• 2.5" model: From the top of the bracket using a screwdriver press each hook down to release the clock and pull out to
unsnap bottom hinges.
• 4” model: From the top of the bracket, insert a thin screwdriver into each notch and gently move the screwdriver
sideways to unlock the clock, pull clock forward and up to unsnap, and lift out.
Page 10