Polanik ZEP User manual
TECHNICAL SPECIFICATION
ASSEMBLY MANUAL
COUNTDOWN TIMER
ZEP
File: 2021-03-10
PRODUCT SUPPORT
Pawel Ciechanowski
p.ciechano[email protected]
Technical specification / user manual ZEP 2 / 5
ATTENTION!
The clock is an electronic device and it requires handling with care.
I. General use
The board is designed to measure the time allowed for trials in athletics field events during competitions or training
sessions.
Technical specification / user manual ZEP 3 / 5
II. Technical specification
Product code
ZEP
Description
countdown timer
Display type
LED
Display colour
red
Display box dimensions [mm]
430 x 230 x 100
Digit hight [cm]
15
Number of LEDs
70 LEDs for 1 digit / 10 LEDs for 1 segment
Brightness
420 cd / > 4 000 Nit
Good visibility [m]
60
Maximum visibility [m]
75
Board type
one-sided
Front cover
solid polycarbonate sheet
Housing
powder coated aluminium, for outdoor use
Time format
M:SS
Viewing angle [°]
120
Power [V] AC
230
Power consumption [VA]
50
Net weight [kg]
6
Set contains
tripod, handheld keypad
Temperature range [°C]
from -10 to +50
Set gross weight [kg]
11
III. Assembly
1. Set up the clock using the included tripod in a suitable place. The clock should be visible to an athlete (according
to World Athletics Technical Rules in force from 1 November 2019, amended 31 January 2020, Book C- C2.1,
25.17).
2. Connect the clock to power supply.
3. The clock tests led display units (all segments light up for about 2s). Then the clock shows time 0s.
4. It is ready to use.
Technical specification / user manual ZEP 4 / 5
IV. Operating
Operate the display with the handheld keypad:
a) press USTAW/SET to adjust first one digit (minutes M), while the digit is fleshing press +to set up their initial
value, then press USTAW/SET again to adjust next two digits (seconds SS),
b) press START to start measuring time from the initially adjusted value,
c) press STOP to stop measuring time.
+increases the
number when
setting the initial
value
USTAW (SET) starts setting the initial value
STOP - stops the clock
START –starts to
count time from the
initial value
Technical specification / user manual ZEP 5 / 5
V. Declaration
1)No. 2021-03-10
2)Issuer’s name: POLANIK Sp. Z o. o. –SP. K
Issuer’s address: Zyczliwa 11, 97-300 Piotrkow Tryb.
3) Object of declaration:
4)The object of declaration described above is in conformity with the requirements of the company production
internal norms.
Additional Information
5)Declaration for:
Buyer/Distributor/User
Signed for and in behalf of:
POLANIK
2021-03-10 Piotrków Tryb.
(Date and place of issue)
6)Pawel Ciechanowski
Product Manager
…………………….………………….. ……………………………………………………………………………
(Name, function) (Signature or equivalent authorized by the issuer)
No.
Description of goods
Code
1
Countdown timer
ZEP
