Polaris Plaster Silo User manual

Plaster Silo
Instruction Manual

2

1
Plaster Silo
Section 1- Introduction
(1-1) How to use the manual 4
(1-2) Terminology and signs 5
Section 2- General information
(2-1) Company’s liabilities 7
(2-2) Guarantee 7
Section 3- Device introduction
(3-1) Main parts description 10
Section 4- Technical features
(4-1) Technical features 12
(4-2) Technical details 12
Section 5- Transportation and installation
(5-1) Unboxing 14
(5-2) Device transportation 14
(5-3) environmental conditions 15
(5-4) Device installation 16
Section 6- Device applications
(6-1) Device initiation 18
(6-2) Device full operation 18
Section 7- Safety
(7-1) General safety 20
(7-2) safety measures of device 20
Section 8- Maintenance
(8-1) Clean-up 22
(8-2) Periodical maintenance 22
Contents

2
Dear Customer
We thank you for your selectivity and trust in purchasing
domestically produced products, and we are pleased that after
continuous efforts, we have been able to manufacture
Plaster Silo device and put it at your disposal.
This product has been designed by our technical and
engineering team of experienced and committed people in the
elds of mechanical, electronics and computer engineering, and
by utilizing updated technology and building upon 25 years of
experience in manufacturing dental equipment, this product has
reached production of export index quality.
In designing the product, three principles of accuracy, reliability
and safety performance and also being easy to use have been
considered, so in order to correctly and completely utilize
product features, we ask you to read the instruction manual
carefully and if you have any questions or you need more
information, contact the after-sales unit.
The instruction manual is a comprehensive reference for the
efcient and safe use of the product. Following the instructions
of this manual has a great role in reducing consumable costs,
avoiding risks and ultimately increasing product life. The
instruction manual should always be kept near the product and
the user should periodically read it.
Please impart us with your constructive guidance, so that we
can benet from your comments, recommendations, and gain
knowledge about your needs.
We hope that you will nd using Plaster Silo to be an enjoyable
and successful experience,
Polaris Engineering and Manufacturing

Introduction
Plaster Silo

4
Introduction
(1-1) How to use the manual
This manual presents the instructions about use, installation,
and maintenance of Plaster Silo made by Polaris Co. It should
be noted that:
•The product should be used according to the instructions of
this manual. Thus, all parts of it should be read carefully before
starting and installing the tool. Special attention should be
paid to the highlighted parts. (refer to section 2-1).
•Observing the instructions of the manual assures the health
and safe operation of the tool.
•Manual is an integral part of the product. Thus, it should
always come with the product and should be used optimally
as a reference for use during the operation of the product. It
should be available even during the sale of the product, or
even it is not used.
•In case of losing or damaging the manual, get a replacement
one from the after-sales service department of Polaris Co.
The following are explained in detail in this manual:
•Installation and start-up of the product
•Operation details of the product and its parts
•Maintenance program
•Primary safety and preventive details

5
Plaster Silo
(1-2) Terminology and signs
Knowledge of signs meanings is of great importance. A list of
signs has been introduced in the following for initial recognition
and reference to them if necessary.
Danger!
Indicates compulsory warnings.
Warning!
Indicates functional recommendations.
Forbidden!
Indicates forbidden activities.
Caution!
Refers to user instructions of the tool.

General Information
Plaster Silo

7
Plaster Silo
(2-1) Company liabilities
(2-2) Guarantee
Polaris is not liable for any problem involving the following:
Failure to follow the instructions of this manual (incorrect use
of the product), repair by an unauthorized person and part
replacement without coordination with the after-sales service
department, failure due to power uctuations.
Guarantee of this product includes repairs, supply, and
replacement. If used appropriately,the guarantee of Polaris Co,
covers all main parts of the device for 18 month.
Following cases and parts are not covered by guaran-
tee:
•power uctuations
•incorrect transportation of device
•inappropriate and frequent use of device despite
having obvious aws
•not observing the maintenance instructions
•installation by unauthorized persons
•any repair or replacement by unauthorized persons.
• failure to instal in appropriately
• power cable
Commutation fees of company representatives to install
or repair during guarantee period will be received from
buyer at site.
The device can’t be used before installation and
insurance of correct operation of protective parts.
It is highly recommended that user has a general
knowledge of this manual before using this device. The
cases which appear to be operation aws in the device
should be registered by user and they should be sent to
the after-sale service department.

8
•Authorized representatives of Polaris Co.
These persons are endorsed by the company to work on the
device under any operational circumstances. They are also
authorized to do any electrical and mechanical adjustment/
repair, maintenance program and authorized parts replacement.
General Information

Device Introduction
Plaster Silo

10
(3-1) Main parts description
A) The anterior part of the device:
1Plaster protective door
2Plaster outlet lever
B) Lower parts of the device:
1Main electricity inlet jack
2Plaster outlet
3Plaster outlet speed adjustment gauge
Device Introduction
1
2
13
2

Technical Features
Plaster Silo

12
Part Number
Device holder 1
Screw and rollplate 10# 4
Flat washer 10# 4
Electricity cable 1
Technical Features
(4-2) Technical details
Power supply 210-240V AC 50/60 Hz
Power 10 W
Reservoir capacity 20 Kg
Device height 580 mm
Device width 250 mm
Device depth 350 mm
Net weight 13 Kg
The device technical specications
Table 1
A list of product accessories
Table 2
(4-1) Technical features and operation rules of device
Polaris Co. products are manufactured based on the latest
technologies and are of the highest qualities. The most recent
design and manufacturing methodologies are employed to
increase the lifetime and quality of products.
Technical specications of the Plaster Silo are given in Table 1:
Accessories

Transportation and
installation
Plaster Silo

14
(5-1) Unboxing
Having received the device, make sure that the main box is sealed
and intact. Otherwise, inform the after-sales service department
of Polaris Co, or its authorized representatives.
In order to avoid accidents, it is really important to follow the
following instructions during the installation and xing of equip-
ment. All steps are explained in detail:
(5-2) How to move the device
The device should be moved as follows:
1Unplug it from the power source.
2Empty the plaster reservoir.
3The device should remain in a vertical position during
movement. For more safety and prevention of any injury due
to neglecting the technical details, refer to section 4-1.
4Put the device in the designated box and if the box is not
available, follow safety instructions for protection, because
the company is not exposed to transportation risk and has
no obligations towards it.
Failure to follow the aforementioned instructions results
in device being damaged, and Polaris Co, won’t be held
liable.
Transportation and installation

15
Plaster Silo
(5-3) environmental circumstances
It is important to choose an appropriate environment during
installation and operation for personal safety, correct operation
and long lifetime.
Workplace temperature: 0-40C
Maximum humidity: 25%
The device should not be used in a place where there is
danger of explosion or ring
The light of the place should be high enough so that all
parts of the device can be seen clearly.
The device should never be exposed directly to sunlight
or humidity of rain, etc.
The following should be done before the use of the device:
1Plaster Silo has been designed to be put on a stable and
rm
worktable in parallel with the ground. The stability of all parts
of the worktable should be checked.
2Plug the device into the outlet after input power and main
electricity are checked (device working voltage is based on
AC 220 electricity).
The grid single –phase electricity should match the
power supply specications of device.

16
(5-4) device installation
1Get the device out of its box carefully. To do so, take out
all the protective material (Plastofoams) around it, take out
the steam cleaner, and put it on a at and standard labo-
ratory table such that the space within 25 cm radius of the
device is empty. Make sure that the surface and legs of the
table are not made of metal.
There is a danger of electrocution, if the surface or legs
of table are made of metal and they are in contact with
the ground. Thus, put your vacuum mixer on a wooden
table or berglass.
2Plaster Silo should not be exposed to sunlight directly.
3An appropriate cord should be used to connect the device
to its nearby power supply.
4An electrical protector must be put on the way of the
socket by the user, so overload or indirect currents don’t
have contact with the protective parts of the device.
It is recommended that the environment electronic
system has an earth connection part.
Do not instal the device due to gypsum adhesion.
Transportation and installation

Device Application
Plaster Silo

18
Device Application
(6-1) Device initiation
(6-2) Device full operation
1Make sure that all the protective parts are intact.
2To use this device, it is only necessary to plug the device to
metropolitan electricity.
For safety reasons, before installing the plaster silo, refer
to specication table.Make sure the plate rolls are tight.
After installing the device by means of safe jack and levers,
follow instructions.
•Plug the device to metropolitan electricity.
•Pull the lever (handle) in front of the device to the outside
direction (user side).
•After lling the container in the special place, release the han
dle slowly.
If the device lever is stiff, contact the authorized service ofce.
The device has an outlet speed gauge and if you turn it clockwise
the speed of plaster exit decreases and if it is turned counter-
clockwise the speed increases.
Speed adjustment gauge