Polygroup TG76M4244L04 User manual

ASSEMBLY INSTRUCTIONS MADE IN CHINA
1
MODEL #: TG76M4244L04
• Before you start to assemble your tree, choose an appropriate location near a wall outlet.
• Do not plug the adaptor into the wall outlet while it in the packaging.
• Assemble the tree stand and place on a level surface. (See Fig. B)
Congratulations on purchasing your new tree from Polygroup®!
Carefully follow the instructions below on how to quickly and easily set up your new tree.
TREE ASSEMBLY INSTRUCTIONS
SET UP INSTRUCTIONS WITH QUICK FOLDTM
2
Insert Section 1 into the tree stand.
Section 1
B
C
3
A. Locate “Pull Here” tab and corresponding
Cinch Handle
B. Hold Cinch Clip firmly with one hand and
press down on clip
C. With Cinch Clip depressed, pull clip away from
tree until all branches are released.
A
Cinch
Handle
Cinch Clip
1
Section 1
Tree top
Section 2
Each tree section is numbered
with a tag. Please identify all
sections before assembling.
Fig. A - Tree and Light Assembly
1
2
3
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Quick Set®
Connections
Quick Set®
Connections
Quick FoldTM Cinch
Quick FoldTM Cinch
Quick FoldTM Cinch
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120VAC, 60Hz, 0.25A Max.
Output: 29V DC 0.45A
Adaptor
To Be Plugged
Into Wall
Outlet
Insert Green
Label Extension
Cord into Adaptor
Fig. B - Tree Stand Assembly
Unfold the legs and lay the
stand in a flat area.Then slide
the locking disc downward and
snap into place.

ASSEMBLY INSTRUCTIONS MADE IN CHINA
2
Top view Side view
Fig. C
• Just plug the adaptor (connecting with the tree power cord) into the wall outlet (See Fig. A), your
entire tree should now be lit.If some bulbs do not light or flickers, search for any loose plugs and/or
broken, loose or missing bulbs. Replace bulbs promptly in order to maintain the performance and life
expectancy of your pre-lit tree.
• Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from
the pole and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. C)
• After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform
look. Shift branches to fill any gaps.Your Christmas tree is now complete and ready to be decorated.
STORAGE INSTRUCTIONS WITH QUICK FOLDTM
• Unplug adaptor from the wall outlet first and then remove all ornaments and decorations.
• When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to
excessive heat or humidity may damage your tree.
Section 2
Section 1
4
Detach Section 2 and put it into
the box.
Tree top
1
Detach tree top and store it
in box.
Section 1
Section 2
Tree top
6
Detach section1 from the tree stand
and place into box. Then fold up tree
stand by unlock the disc and then
store in box.
5
Release all branches using the same
procedures described in step 3.
Section 1
Section 2
Section 2
Section 1
3
Fold the lower layer of Section 2
like step 2.
Section 1
5
Cover the protective cap of tree
bottom Section 1, then follow step 2
to fold tree.
6
Remove the protective cap of Section 2
and add Tree top.
Tree top
2
A. Cover the protective cap of the Section 2.
B. Hold Cinch Handle with one hand.
C. Hold Cinch Clip firmly with other hand and press down on clip.
D. Pull handle toward you while pushing away cinch clip
until the upper branches of tree middles Section 2 are
folded completely.
A
B
C D
4
Remove the protective cap of Section1
and add Section 2.
Section 1
Section 2

ASSEMBLY INSTRUCTIONS MADE IN CHINA
3
TROUBLESHOOTING TIPS
SPARE PARTS
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure that all plugs are properly connected and adaptor is plugged into the
wall outlet.
2.Turning the poles gently to make sure pole to pole are connected into place.
3. Check for loose connection between light string plugs and extension cords.
4. Please check for loose, broken or missing light bulbs and replace as needed.
1. Extra hinge pins are included for repairing the hinges.
Place the branch into the slot of the bracket.
2. Insert a new hinge pin through the hole and secure
using the retainer washer.(See Fig. D)
Each tree includes hinge pins/washers, and for pre-lit trees spare bulbs are also included. If extra parts are
needed, please contact our customer service center.
Loose Hinge Pin
Fig.D
1. Use only the adaptor supplied with this product. Using a different adaptor will damage the lights
and cause fire, electrical shock hazards.
2. FOR INDOOR USE ONLY.
WARNING
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact
us at 1-888-919-0070 or visit our website at www.polygroupstore.com. One of our customer service
representatives will be happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
Customer Name:
Address(No P.O. Boxes):
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem: