Polytree TG90P3914C02 User manual

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Congratulations on purchasing your new tree from Polytree! This tree comes with Quick Set and
Simple Shape technology-Set up and light up your tree in less than 10 minutes! Carefully follow the
instructions below on how to quickly and easily set up your new tree.
TREE ASSEMBLY INSTRUCTIONS
3. Each tree section is numbered with a tag.Please identify all sections before assembling.
4. Assemble the tree from bottom to tree top. Start with the bottom section and remove the protective
cap before inserting into the assembled stand.Make sure the pole is firmly inserted and secured into
the stand.
5. Plug the adaptor into the wall outlet (see Fig. B), continue by inserting the upper tree section(s) to the
lower section(s) until inserting the tree top.Allow branches to fall into place or gently pull up and out.
When adjusting branches, be sure that all wires are free of branch hinges.
6.Your entire tree should now be lit.If some bulbs do not light or flickers, search for any loose plugs
and/or broken, loose or missing bulbs. Connecting the plugs or replace the bad bulbs promptly in order
to maintain the performance and life expectancy of your pre-lit tree.
7.This is a Simple Shape™ tree. Just slightly upsweep all branch tips for a uniform look.Shift branches
to fill any gaps.Your Christmas tree is now complete and ready to be decorated.
ASSEMBLY INSTRUCTIONS MADE IN CHINA
MODEL #:TG90P3914C02
Fig. B - Tree and Light Assembly *Electrical Rating For The Tree
(For Indoor Use Only)
4.8A 120V,60Hz
Section 4
Section 3
Section 2
Section 1
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Fig. A - Tree Stand Assembly
Click
Pull apart the legs of the stand so that they
are snapped into an x-shape, place the tree
stand on a level surface.
To close the stand, press the metal button
and fold the legs together.
Foot Pedal
on/off Switch
Insert
Green Label
Plug Into Wall
Outlet

ASSEMBLY INSTRUCTIONS MADE IN CHINA
Fig. C
1. Unplug adaptor from the wall outlet first and then remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to
remove from section below and fold all branches toward the pole.
3. Continue by gently lifting straight up each section(s) from the section
below and fold all branches toward the pole until the bottom section
is removed from the tree stand. Cover the protective cap on the poles
to avoid damaging the internal parts. (See Fig. C)
4. Carefully place all tree sections into shipping box and tape it shut.
5.When not in use, please store your tree in a cool, dry place away from
sunlight. Exposing your tree toexcessive heat or humidity may damage your tree.
STORAGE INSTRUCTIONS
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure that all plugs are properly connected and adaptor is plugged into the wall
outlet. (If the tree comes with a foot pedal, try stepping on the on/off button).
2.Turning the poles gently to make sure pole to pole are connected into place.
3. Check for loose connection between light string plugs and extension cords.
4. Please check for loose, broken or missing light bulbs and replace as needed.
Loose Hinge Pin
1. Extra hinge pins are included for repairing the hinges.Place the branch into the slot of the bracket.
2. Insert a new hinge pin through the hole and secure using the retainer washer. (See Fig. D)
TROUBLE SHOOTING TIPS
Each tree includes hinge pins/washers, and for pre-lit
trees spare bulbs are also included. If extra parts are
needed, please contact our customer service
center.
SPARE PARTS
Fig. D
WARNING
The external flexible cable or cord of this luminaire cannot be replaced; If the cord is damaged,
the luminaire shall be destroyed.
ARBOL NAVIDEÑO
MARCA: MEMBER´S MARK
MODELO: TG90P3914C02
ESPECIFICACIONES ELÉCTRICAS
120 V~ 60 Hz 576 W
CONTENIDO 1 PZA
HECHO EN CHINA
ANTES DE UTILIZAR EL PRODUCTO LEA EL INSTRUCTIVO
CONSERVE EL INSTRUCTIVO PARA FUTURAS REFERENCIAS
NO CONECTAR MAS DE TRES SERIES EN SERIE
EN CASO DE QUE SU CORDÓN DE ALIMENTACIÓN LLEGASE A SUFRIR UN DAÑO TOTAL O PARCIAL NO TRATE DE REPARARLO ACUDA
AL CENTRO DE SERVICIO MARCADO EN SU GARANTÍA O BIEN CON UN TÉCNICO ESPECIALISTA
ESTE APARATO NO ESTA DESTINADO PARA SER UTILIZADO POR PERSONAS (INCLUYE MENORES DE EDAD) CUYAS CAPACIDADES
FÍSICAS, SENSORIALES O MENTALES SEAN DIFERENTES O ESTÉN REDUCIDAS, O CAREZCAN DE EXPERIENCIA O CONOCIMIENTO, A
MENOS QUE DICHAS PERSONAS RECIBAN UNA SUPERVISIÓN O CAPACITACIÓN PARA EL FUNCIONAMIENTO DEL APARATO, POR UNA
PERSONA RESPONSABLE DE SU SEGURIDAD
LOS MENORES DE EDAD DEBEN SER SUPERVISADOS POR UN ADULTO PARA ASEGURAR QUE ELLOS NO EMPLEEN ESTE PRODUCTO
COMO UN JUGUETE.
IMPORTADOR: COMERCIALIZADORA MÉXICO AMERICANA S. DE R.L. DE C.V.
DIRECCIÓN: AV. NEXTENGO No. 78 COL. SANTA CRUZ ACAYUCAN DELEGACIÓN AZCAPOTZALCO, MÉXICO D.F.
C.P. 02770
R.F.C. CMA 9109119L0
TEL. IMPORTADOR: 58-99-12-00 EXT:31616