Polywood GNB24 User manual

A - 1/4-20 X 1-3/4 WAFER SHCS
8
C - 8 X 2 PHIL FLAT SCREW
4
- 4MM T-HANDLE HEX KEY
(INCLUDED)
- PHILLIPS SCREW DRIVER
B - 1/4-20 X 2-1/2 WAFER SHCS
2
A
AB
A
A
B
using (2) 1-3/4" chair bolts
Description
MODEL : GNB24
ALLHARDWAREISCOATEDSTAINLESSSTEEL
TOOLS NEEDED
- Attach back to sideframes
__(2) Sideframes
__(2) Angle braces
__(1) Seat
using (2) 2½" chair bolts
Qty.
using (4) 8x2" screws
__(1) Back
__(1) Hardware pack
Parts
Step 2
- Attach back to seat
Step 3
Attach angle brace to front leg, then seat,
C
Step 1
Attach sideframes to seat
using (6) 1-3/4" chair bolts
9/20/2012
ASSEMBLY INSTRUCTIONS

TOOLS NEEDED
using (4) 3” chair screws
PHILLIPS HEAD SCREW DRIVER
Description
-(1) Hardware pack
8
Model: CLT1818
4mm HEX KEY, ALLEN, T-HANDLE (INCLUDED)
Qty.
-(1) Table top
-(2) Braces
-(2) Sideframes
Step 2
Attach braces to sideframes
ALLHARDWAREISCOATEDSTAINLESSSTEEL
Step 1
Lay table top face down.
Attach sideframes to table top
using (4) 3” chair screws
9/14/2012
ASSEMBLY INSTRUCTIONS
Braces
Table top
Sideframe
A - .27 X 3 SOCKET WAFER A