Pond Boss NLFTN User manual

Pond Nozzle Kit
ITEM #NLFTN
PACKAGE CONTENTS
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement parts.
•Estimated Assembly Time: 5 minutes
•No tools required for assembly.
ASSEMBLY INSTRUCTIONS
1. Connect the two extension tubes (A) with the coupler (B).
Fig. 1
NOTE: Use the coupler (B) if no spitters are to be used.
Part
Description
Quantity
A
Extension tube
2
B
Coupler
1
C
Adapter for 1/2” outlets
1
D
Adapter for 3/4” outlets
1
E
3-tier fountain head
1
F
Trumpet fountain head
1
G
Waterbell fountain head
1
H
Foam-jet fountain head
1
I
Lower fountain head nozzle
1
J
Diverter valve
1
E
B
A
A
D
G
F
H
J
C
I
A
B
A

2. Connect the extension tubes (A) to the diverter valve (J).
Make sure the arrow on the valve is positioned as shown and
the diverter valve is connected as shown.Fig. 2
NOTE 1: Use diverter valve (J) to simultaneously run a
spitter and fountain head from one pump.
Fig. 2
3. For 1/2 in. tubing, connect the tubing onto the second output
of the diverter valve. Connect the other end of the tubing to a
spitter or other water feature. Fig. 3
NOTE: Tubing and spitter are NOT INCLUDED.
Fig. 3
4. Connect the fountain head to the top extension tube. Adjust
the diverter valve to split the flow between the fountain head
and the spitter. Fig. 4
Fig. 4
5. Choose a fountain head for the desired water effect, and
assemble your choice as shown in Fig. 5
Fig. 5
A
A
A
A
E
H
I
I
F
G
Fountain head
Extension
tube
Connect
to spitter
Water flow
A
A
J
Diverter valve
1/2 in. tubing

6. For the PF350, PP225, PP350, PP575, use the 3/4” adapter
to connect the pump to the extension tubes. Fig. 6
Fig. 6
7. For the PF500, use the 5/8” adapter to connect the fountain
head kit onto the pump. Fig. 7
NOTE:5/8” adapter is NOT INCLUDED.
Fig. 7
CARE AND MAINTENANCE
•Periodically disassemble the fountain head kit and clean the parts.
•Use a cloth or soft brush with warm, soapy water. Be sure to use biodegradable soap.
REPLACEMENT PARTS LIST
Printed in China
Part
Description
A
Extension tube
B
Coupler
C
Adapter for ½” outlets
D
Adapter for ¾” outlets
E
3-tier fountain head
F
Trumpet fountain head
G
Waterbell fountain head
H
Foam-jet fountain head
I
Lower fountain head nozzle
J
Diverter valve
A
B
C
D
E
F
G
H
I
J
PP225&PP350&
PP575
PF320
D
D
A
A
Extension tube
PF500
5/8” adapter
A
Learn more about patio decoration we have.