Pond Logic PondShelter 160350 User manual

Assembly Instructions
Perfect for ponds 4’ x 6’ to 11’ x 16’
Airmax® Ecosystems
Natural. Clear Water. Guaranteed.™
www.airmaxeco.com
Airmax® Ecosystems
Natural. Clear Water. Guaranteed.™
www.airmaxeco.com
4
PondShelter™ Net
Water Garden and Fish Pond Net Kit
• PondShelter™ Net
(Item #160350)
031_13
COVER LID
NOTES:
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________

PRODUCT INFORMATION
Thank you for purchasing the Pond Logic®PondShelter™ Net. Before installation, please take a
moment to review the enclosed information.
NOTE: The PondShelter™ is designed to protect against leaves & light debris. DO NOT let snow,
ice or heavy debris accumulate on the PondShelter™.
CONTENTS: No Tools Required
MAINTENANCE
• As leaves or debris gather on the netting, remove the stakes from one side, lift the netting,
and shake free leaves and debris.
• We recommend to remove the PondShelter™when heavy snows or ice storms approach
or when closing your pond for winter.
Failure to do maintenance tasks may result in net tearing or collapsing.
INSTALLATION
STEp 1
Unpack net and frame assembly, stakes, and tie-downs. Inspect
and count contents for accuracy.
STEp 2
Unroll netting from around the aluminum frame. Slide the
netting completely up each leg until bottom grips are exposed.
When nished, stand net up to look like a tent and prep for
installation. (Figure 1a & 1b)
STEp 3
Fit frame over pond and adjust legs to the corresponding
landscape. Turn legs counter-clockwise to unlock and adjust.
When nished, twist clockwise to lock in place. Once legs are
properly positioned, stake in place via the nylon anchoring loop
attached to the bottom grips. (Figure 2a & 2b)
STEp 4
Pull netting down over the frame and t along the perimeter
of the pond. Pull the drawstring at the base of the net to form
a tight t. The drawstring can be held in place with a stake to
prevent loosening. (Figure 3)
STEp 5
Place stakes through the reinforced band at the base of the
netting to hold in place (Figure 4). A 3’ “skirt” of additional
netting extends past the reinforcement to ll exposed gaps in
landscape. (Figure 5)
STEp 6
Clip tie-downs to the center of each span of netting (Figure 6).
Pull tie-downs tight and stake down to eliminate any net sag.
(Figure 7)
32
PondShelter™ Net
Water Garden and Fish Pond Net Kit
Aluminum
Frame
(4’ - 10’)
Premium ¼”
Mesh Netting
(20’ x 20’)
30 Metal
Stakes
(6 1/2”)
4 Nylon
Tie-Downs
(10’)
Adjust Frame
Figure 3
Figure 4
Figure 5
Figure 2a
Figure 1a
Figure 6 Figure 7
Figure 1b
Figure 2b
Reinforced Band