PondMAX WF110 User manual

888.868.1185
[e-mail] VERSION
NOV 2020
888.868.1185
[e-mail]
www.pondmax.com FOR MODEL:
WF110
WATERFALL
SPILLWAY
INSTRUCTION MANUAL

PONDMAX.COM
WELCOME TO THE WORLD OF PONDMAX ™.
YOU MADE THE RIGHT CHOICE INVESTING IN THIS
QUALITY PRODUCT. THANK YOU AND ENJOY.
BEFORE USING THIS PRODUCT, PLEASE READ THESE INSTRUCTIONS CAREFULLY AND
BECOME FAMILIAR WITH THE UNIT. PLEASE KEEP THESE INSTRUCTIONS IN A SAFE
PLACE FOR FUTURE REFERENCE.
TECHNICAL SPECIFICATIONS
DESCRIPTION WF110
MAXIMUM FLOW RATE (GPH) 1200
INLET (IN) 1”, 1 1/4”, 1 1/2”
SPILLWAY WIDTH 11”
COMPONENTS
Spillway Mesh Bag
Filter Mat
PondMAX Spillway Box
Universal Hose Adapter
WATERFALL
SPILLWAY
WATERGARDENING TO THE MAX
1. Insert universal hose adapter through side hole. Place O-Ring inside of PondMAX Spillway
and over the threads. Hand tighten nut.
2. Connect the PondMAX Spillway box to your pump using kink free hose with hose clamp.
3. Place Filter Mat into the PondMAX Spillway box.
4. Fill the mesh bag with filter substrates. Place filled mesh bag on the top of PondMAX
Filter Mat.
1 2 3 4
MAINTENANCE
• Thanks to the easy to clean Filter Mat,
your Spillway has been designed for
minimum maintenance.
• Depending of the water condition and
the amount of water flowing through
your unit, we suggest to clean the
substrate and Filter Mat periodically.
• For achieving the best filtration result,
combining this spillway together with
a PondMAX Pressure Filter will guaran-
tee clean water for your pond.
CLEANING INSTRUCTIONS
Check and clean the filter mat when it
appears dirty or when the flow of water
decreases.
• Remove the Filter Mat, gently tap it on
a raised flat surface; this will cause the
sediment to be displaced.
• Rinse the Filter Mat until you are happy
that it is clean. (it is suggested to use
pond water for cleaning purpose, as
tap water, chlorinated water, soaps
or chemicals can kill the beneficial
organisms living on the Filter Mat.)
! WARNING
If the waterfall is turned o during the winter months, be sure to empty the
spillway and any tubing that is above ground since standing water will form ice
that can split valves and rigid fittings.