Poolvergnuegen POOLCLEANER User manual

TM
Remove the POOL-
CLEANER ™ from the
1 2
tires are worn down to the
tread wear indicators!
TO REMOVE THE 2X
POOLCLEANER ™ TIRES
OR 4X POOLCLEANER
™ FRONT TIRES, using
only your hands (other
objects may damage the
POOLCLEANER ™) simply
fold the tire off from top to
bottom.
3
BEFORE YOU DO ANYTHING, TURN THE PUMP OFF. SUCTION CAN BE
DANGEROUS!!!
pool, making sure to place
the hoses straight. Separate
the POOLCLEANER ™ from
the Leader Hose.
Place the cleaner on a
work surface.
The tires must be
replaced when the
4TO REMOVE THE 4X
POOLCLEANER ™
BACK TIRES you will need
to remove the Shroud with a
Phillips screwdriver (see pg.
11 step 3) and then remove
the Wheel Hubs with a 5/32”
or 4 mm Allen wrench turning
the wrench counterclockwise.
5 Place the bolt through the Wheel Hub and line it up
with the threaded hole, making sure the gear pro-
truding from the POOLCLEANER ™ engages with
the gears on the Wheel Hub. Tighten bolt with Allen
wrench clockwise.
6Place the Shroud back onto the POOL-
CLEANER ™ making sure it’s on correctly.
Drop the three screws into the screw holes and
secure.
Note: The front tires
ALWAYS have
HUMPS (raised treads) [ 2X
& 4X POOLCLEANER ™].
The back tires on the 4X
DO NOT have humps!
Wheel Hub (starting from one
side and folding it back on).
Make sure the tire is on cor-
rectly.
Once off,
fold the tire
off the Wheel
Hub (step
3 above).
To replace
stretch the
tire over the
If need be do this closer to your
body for better leverage.
CHANGING TIRES ON YOUR SUCTION
POOLCLEANERS

CHANGING TIRES ON YOUR PRESSURE
POOLCLEANER
TM
Remove the POOL-
CLEANER™ from the
1 2
tires are worn down to the
tread wear indicators!
TO REMOVE THE POOL-
CLEANER™ FRONT
TIRES, use only your hands
(other objects may damage
the POOLCLEANER™)
simply fold the tire off from
top to bottom.
3
BEFORE YOU DO ANYTHING, TURN THE PUMP OFF. SUCTION CAN BE
DANGEROUS!!!
pool. Place the hoses
straight. Separate the
POOLCLEANER™ from the
hose.
Place the cleaner on a
work surface.
The tires must be
replaced when the
4
BACK TIRES remove the
Wheel Hubs with a 5/32” or
4mm allen wrench turning the
wrench counterclockwise.
Once off, fold the tire off the
Wheel Hub (step 3 above).
To replace stretch the tire
over the Wheel Hub (starting
from one side and folding it
back on). Make sure the tire
is on correctly.
5 Place the bolt through the Wheel Hub line it up with
the threaded hole, making sure the gear protruding
from the POOLCLEANER™ engages with the gears
on the Wheel Hub. Tighten bolt with Allen wrench
clockwise.
6Rotate the right front tire forward to ensure
that it moves smoothly. If not you fastened the
wheel hub incorrectly.
Note: The front tires
ALWAYS have
HUMPS (raised treads) The
back tires DO NOT have
humps!
If need be do this closer to your
body for better leverage.