Pop-A-Shot PREMIER STEEL User manual

POP-A-SHOT ENTERPRISE LLC
200 NORTH 3RD STREET, SALINA, KS 67401
Email: [e-mail]
SUPPORT BARS
BACKBOARD
BACK
UPRIGHT
T BAR
TOP
TOP
MIDDLE
BOTTOM
BOTTOM
Page 2
RIM WITH COLLAR ASSEMBLY
TELESCOPING LEGS
SUPPORT
BOLT
POSITIONING
BOLTS
CROSS
BARS
CROSS BARS
FRONT
UPRIGHT
SET
SCREWS
RAMP & SIDE NETS
POWER SUPPLY
POP-A-SHOT®PREMIER
H
EE
D
D
A
A
B
B
C
C
FF
H
GG

POP-A-SHOT ENTERPRISE LLC
200 NORTH 3RD STREET, SALINA, KS 67401
Email: [e-mail]
Your Premier Steel game comes with 2 boxes.
Box 1:
B, C, D with backboard, Qty 1
E, G, H and basketballs
Box 2:
A, F, Qty 1, Ramp with side nets.
E, G, H, collar assembly, hardware kit, instructions and basketballs
Tools needed: 9/16 for rim bolts, 7/16 for leg bolts,
hex wrench (included)
Steps:
• Join A& B
• Raise front of Aand insert 5” bolt.
Note: 5” bolt does not need to be tightened unless the legs are extended.
• Raise back of B, extend T-Bar and insert bolts and tighten lock nuts.
• Place backboard Don back of C.
• Attach rim with collar assembly to the backboard.
The carriage bolt located on the collar assembly is to protect
the sensor, please do not remove it.
• Sensor adjustment - located on the back of the sensor, there is a
small sensitivity adjustment screw. Should the sensor not detect
the basketball, rotate the screw counter clockwise to correct.
This may take several rotations. To correct over sensitivity,
rotate clockwise.
• Place risers E(2) on front of F.
• Join support bars G(2) to H(2).
• Place support bars on top of Dand E.
• Tighten set screws.
• Attach side nets.
POP-A-SHOT®PREMIER
Page 3

POP-A-SHOT ENTERPRISE LLC
200 NORTH 3RD STREET, SALINA, KS 67401
Email: [e-mail]
Steps (Continued):
• Using zip ties through the grommets, attach the ramp to the front
lower cross bar of the two (2) cross bars, leaving slack in the zip
ties for adjustments.
• Pull front ramp flap over the top cross bar and then under the
lower cross bar, attach to the velcro underneath the ramp.
Now attach the sides of the ramp to the top support bars and
along the back uprights and front uprights of the game.
Make sure all the velcro straps are in place.
• Back of ramp: Attach 5 grommets to Bottom Cross bar. Attach 4
grommets to the Top Cross Bar.
• The optional telescoping legs maybe released by removing the
positioning bolts from the frame. Lift the front end first to let the
legs drop far enough to reinsert the positioning bolts into the
predrilled holes in the legs and the frame.
Then tighten 5” bolt. Repeat this step for the back of the game
• Insert the sensor wire from the collar to the back of the electronic
scoreboard (see page 5) as follows: Top-Brown, Middle-Black,
and Bottom-Blue.
• Insert the AC adapter cord into the back of the electronic
scoreboard. Plug into power outlet.
Warranty information: Lifetime on all electronic components.
POP-A-SHOT®PREMIER
Page 4

8Ω.0.5W
TOP-BROWN
MIDDLE-BLACK
BOTTOM-BLUE
SOUND CONTROL
PREMIER SCOREBOARD
POP-A-SHOT ENTERPRISE LLC
200 NORTH 3RD STREET, SALINA, KS 67401
Email: [e-mail]
PREMIER BACKBOARD
TIME
SCORE
Page 5