popstrukt LOLLIPOP User manual

ASSEMBLY INSTRUCTIONS
CODE | C19
LOLLIPOP LOCKER / STORAGE UNIT
SHELFHOLDER:
16PCS
DOOR PIVOT:
1PCS
SCREW
FORHANDLE:
2PCS WALL PLUG
1PC
SELF-TAPPING
SCREW
1PC WALL SCREW
1PC
WALL FIXTURE
WALL FIX
STRIP
1PC
HANDLE:
1PCS
DOORS PINDLE:
1PCS
TAILSCREW(4*10):
4PCS
KEYS WITH
KEYRING:
2PCS
RUBBER
1PCS
Please visit www.popstrukt.com/instructions section for more information Please visit www.popstrukt.com/instructions section for more information
FRONT
FRONT
BACK
LEFTSIDEPLATE:1PC DOOR:1PC RIGHTSIDEPLATE:1PC BACKPLATE:1PC
BOTTOMPLATE:1PC
SHELF:4PCS
TOPPLATE:1PC
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM FURNITURE TIP-OVER. TO
PREVENT THIS FURNITURE FROM TIPPING OVER IT MUST BE PERMANENTLY FIXED TO THE
WALL. BASIC FIXING DEVICES FOR BRICK WALLS ARE INCLUDED. HOWEVER SINCE DIFFERENT
WALL MATERIALS REQUIRE DIFFERENT TYPES OF FIXING DEVICES USE FIXING DEVICES SUITABLE
FOR THE WALLS IN YOUR HOME. FOR ADVICE ON SUITABLE FIXING SYSTEMS, CONTACT
YOUR LOCAL SPECIALIZED HARDWARE DEALER
WARNING
SELF-TAPPING
SCREW 1PC

INSTALL THE BOTTOM PLATE.
STEP 3
STEP 4
PUT THE TOP PLATE ON TO THE LEFT AND
RIGHT SIDE PLATES.
STEP 1
STEP 2
BEND UP
Please visit www.popstrukt.com/instructions section for more information Please visit www.popstrukt.com/instructions section for more information
CONNECT THE LEFT AND RIGHT SIDE
PLATES WITH FRONT AND BACK BASE.
NOTE: HOLE TO
FACE FRONT.
INSTALL THE BACK PLATE
BY TAIL SCREWS.
A
B

STEP 7
INSTALL THE SHELF AND HANGING RAIL.
STEP 5
STEP 6
Please visit www.popstrukt.com/instructions section for more information
Please visit www.popstrukt.com/instructions section for more information
FIX THE BOTTOM PLATE WITH THE
BUCKLE OF THE BOTTOM SIDE PLATE. INSTALL THE DOOR AS SHOWN. INSERT BOTTOM FIRST,
THEN TOP WITH PIN. INSERT SPACER AT BOTTOM
IF NEEDED.
STEP 8
LEVEL UNIT USING ADJUSTABLE FEET UNTILL DOOR
IS ALIGNED PROPERLY.
ATTACH HANDLE USING X2
SMALL HANDLE SCREWS
BEND TAB UP

Please visit
www.popstrukt.com/instructions
section for more detailed information
and assembly videos
POPSTRUKT FURNITURE @POPSTRUKT_COM @POPSTRUKT.FURNITURE POPSTRUKT FURNITURE
Please visit www.popstrukt.com/instructions section for more information
Please visit www.popstrukt.com/instructions section for more information
Finish en klaar.
STEP 9 SUPPLIED
WALL
FIX TO WALL
STEP 1
INSERT WALL PLUG INTO
THE WALL USING A DRILL.
STEP 2
FIX THE MATERIAL STRIP TO THE
BACK OF UNIT USING SCREW.
STEP 3
FIX THE UNIT TO THE WALL VIA
MATERIAL STRIP.
DRILL HOLES IN WALL
WALL
WALL
TIP: Blow dirt out of hole.
WALL
WALL PLUG
1PC
WALL SCREW
1PC
WALL FIX
STRIP
1PC
SELF-TAPPING
SCREW
1PC