Porsche Taycan User manual

InstallationandConversionInstructions Taycan (Y1A)
09 /21 ENU 9163 9
PORSCHE Dashcam – Taycan
Information: Retrofitting
Information
Figure1
ModelYear: As of 2020
Note: ThePorschefrontcamera(dashcam
 Figure1)isaffixedtotheLEFT of the interior mirror(viewedin
directionoftravel)onthewindshieldandisconnectedtothevehicleelectricalsystem.
It is ideal for making video recordings of driving situations and while parking. It can be configured and
operatedusingarelatedapponyoursmartphone.
Recordedvideos arestoredonthe supplied SD cardandpreviousrecordingsareoverwritten.
Ifthedashcamdetectsashake/vibrationorif theradarsensoristriggered,the recordedvideois stored
separatelyandnotoverwritten. Recordingscanbedownloadeddirectlyfromthe SD cardorviatheapp.
Tequipment Jul 7, 2021
Page1of19

9InstallationandConversionInstructions
Information
Important information for customers/customer advisors
• Askcustomerstodownloadandinstallthe "Porsche Dashcam App" fromthe App Store(Appleor
GooglePlay)ontheirdevice(smartphone/tablet) inadvance.
For vehicle handover:
• Togetherwiththecustomer,checkwhetherafirmwareupdatevia "Porsche Dashcam App" is
necessary. Perform the firmwareupdatetogether if necessary.
• Togetherwiththecustomer,choosethe"Region/State/Country"byselectingtherelevantflagand
formatthe SD card.
Other information for the customer:
• Thecustomerisresponsibleforchoosingtheright "Region/State/Country"!
• Aftercrossinganationalborder: Updatethe"Region/State/Country"(seealsoconditionsof use for
thistopic)
Parts Info: 9Y0.044.930 PORSCHEfrontcamera (dashcam), set
Parts List:
Figure2
Jul 7, 2021
Page2of19 Tequipment
Taycan (Y1A)
9163 ENU 09/21

InstallationandConversionInstructions Taycan (Y1A)
09 /21 ENU 9163 9
——— 1x 3Mprivacyfilm(front&rearcamera)
 Figure2-1-
——— 1x Frontcamera
 Figure2-2-
——— 1x MicroSDmemory card(32GB,pluggedintofrontcamera)

Figure2-3-
—— — 1x Frontcameraretainerplate assembly with wireharness
 Figure
2-4-
——— 1x Wireharnessassemblywithconnector(3-pin,wireapprox. 4m
long)
 Figure2-5-
——— 3x Protectivefoam(∅approx. 29x74)
 Figure2-6-
——— 7x Tie-wrap,145x3.6x1.1
 Figure2-7-
N.907.326.01 4x Socketcontact,4.8 x ∅1.0mm²
 Figure2-8-
N.907.327.01 2x Socketcontact,4.8x∅2.5 mm² (standardpowertimer)

Figure2-9-
N.906.844.01 3x Socketcontact,2.8x∅1.0 mm² (junior powertimer)
 Figure2
-10-
999.650.136.22 4x Socketcontact,5.0 x ∅1.0mm²
 Figure2-11-
N.017.506.5 2x Cableringeyelet,A6
 Figure2-12-
992.971.859.B 2x Cableringeyelet,M8
 Figure2-13-
N.102.615.01 2x Blade-typefuse,5amp(mini)
 Figure2-14-
N.017.131.16 2x Blade-typefuse,5amp
 Figure2-15-
——— 1x PORSCHEdashcamoperatinginstructions
 Figure2-16-
RepairKits: ONLY orderwhenreplacingthewindshield/rearwindow:
9Y0.044.931 1x "Adhesivepad"repairkit,includes:
——— 1x Adhesivepadonfrontcameraretainerplate (grey)
——— 1x Adhesivepadforrearcamera(grey)
——— 1x 3Mprivacyfilm(front&rearcamera)
 Figure2-1-
ONLY orderiffront camera "wiringharness"isdamaged:
9Y0.044.931 1x "Adhesivepad"repairkit
9Y0.044.932 1x Wiringharnessrepairkit,includes:
—— — 1x Frontcameraretainerplate assembly with wireharness
(WITHOUTadhesivepads,similarto
 Figure2-3-)
——— 1x Wireharnessassemblywithconnector(3-pin,wireapprox. 4m
long)
 Figure2-4-
——— 3x Protectivefoam(∅approx. 29x74)
 Figure2-5-
——— 7x Tie-wrap,145x3.6x1.1
 Figure2-6-
——— 1x Bagwithsocketcontacts,cableringeyeletsandfuses
 Figure
2-7 to 14-
Tequipment Jul 7, 2021
Page3of19

9InstallationandConversionInstructions
Technical
Details: • VideorecordinginQuadHighDefinition(QHD) • Lenswithpolarizationfiltertoreducereflectionsandimprovecolorsandcontrasts
• Audio recording(canbedeactivated)
• Globalpositioningsystem(GPS)sensor
• Vibration sensor
• Radarsensorforvideorecordingwhenanobjectisapproachingthevehicle
• Bracketforthewindshieldforfixed mounting on the vehicle
Materials: ——— 1x Auxiliaryline(TekalanorTeflonhose)approx. 1,500mm/59in
long
——— 1x Wrapping/insulatingtape(commerciallyavailable)
——— 1x Cleaningcloth(commerciallyavailable)
——— 1x Isopropanol(commerciallyavailable)
Tools: 9900-PIWISTester3
Tablet,smartphone or PCwithInternetaccess
Markingpencil/chalk
Flashlight
Plasticsqueegee
Installing: 1 Preparatory work
1.1 Cleaninsideandoutsideofthewindshield.
1.2 Exposefrontroofarea
1.2.1 Remove roofconsole.
 WorkshopManual'Removing and installingfrontroof
console'
1.3 ExposeA-pillar(left)anddashboardarea.
1.3.1 Remove A-pillar (left).
 WorkshopManual'RemovingandinstallingA-pillartrim
panel'
1.3.2 Removedashboardtrim panel (attheleft).
 WorkshopManual 'Removing and
installingdashboardtrimpanel'
1.3.3 Loosenleftfusecarrier.
 WorkshopManual'Looseningandsecuringfuse box in
footwell'
2 InstallPORSCHEfront camera(dashcam)inthevehicle
Overviewofinstallationposition
 Figure6
Jul 7, 2021
Page4of19 Tequipment
Taycan (Y1A)
9163 ENU 09/21

InstallationandConversionInstructions Taycan (Y1A)
09 /21 ENU 9163 9
Figure6
1–Interiormirror
2– InstallationpositionofPORSCHEfrontcamera(dashcam)
3– Electricwireharness
4– Fuseboxondashboard(attheleft)
5–Groundpin
2.1 Positionfrontcamera (dashcam) totheLEFToftheinteriormirror on the windshieldin
directionoftravel
Figure7
2.1.1 Installretainerplate withwire
harnessonthebaseofthefront
camerauntilthelockingmechanism
engages(
 Figure7).
1– Retainerplatewith wire
harness
2– Frontcamerabase
Tequipment Jul 7, 2021
Page5of19

9InstallationandConversionInstructions
Illustrationmaybedifferent,
checkdimensions
2.1.2 Tracetheoutlineoftheinterior
mirror(
 Illustrationmaybe
different,checkdimensions-1-)on
theoutsideofthewindshieldusing
amarkingpencil/chalk.
1– Outlineofinteriormirror
2– Outlineoffront camera
base
3–Interiormirror
4– Frontcamera
X– approx. 210mm/8.27in
Z– approx. 100mm/3.94in
2.1.3 CopydimensionsXandZ on the
windshield.
DimensionX = distancefrom lower
edgeofoutlineoffront camera
basetoedgeofroof: Length 210
mm +/-5 mm
DimensionZ=distancefrom inner edgeofoutlineoffront camera base to inner
edgeofoutlineofinteriormirror: Length 100 mm +/-3 mm
Information
Observethefollowingpointsduringpositioning/alignment:
• Sufficientdistancebetweenfrontcameraandinteriormirrorbase: atleast5
mm/0.2in!
• Getanotherpersonstandinginfrontofthe vehicle tocheckandconfirmthe
horizontalalignmentofthe camerawiththePORSCHElogo!
2.1.4 Positionfrontcamerawithretainerplateinthevehicle atthemarkingon the wind-
shield.
2.1.5 Getanotherpersontotrace andshadeintheoutlineoftheretainerplateonthe
outsideofthewindshieldusinga marking pencil/chalk.
2.1.6 Clean the inside of the windshield in the bonding area for the retainer plate (shaded
area)to removeanydustandgrease.
2.2 Installfrontcamera(dashcam)onthewindshield
NOTICE
Adhesive films not prepared/installed correctly
•Damagetoadhesivefilms
• Inadequate adhesion of adhesive films
Jul 7, 2021
Page6of19 Tequipment
Taycan (Y1A)
9163 ENU 09/21

InstallationandConversionInstructions Taycan (Y1A)
09 /21 ENU 9163 9
Carefully clean the areas on which you intend to stick the film to ensure that all traces
of oil, grease and silicone are completely removed.
Do not touch the bonding surfaces.
Object (adhesive film, vehicle, etc.) and ambient temperature: Minimum temperature
15°C / 59°F.
Figure9
2.2.1 Pull3Mprivacyfilmoffthebacking
sheet(
 Figure9).
1– 3M privacy film
2– Marked bondingsurface
3–Interiormirrorbase
2.2.2 Position 3M privacy film on the
markedbondingsurfaceon the
windshield(
 Figure9)andstickit
on.
2.2.3 Carefullyaffix3Mprivacyfilmusing
aplasticsqueegee, startingfrom
the center andmoving towardsthe
edge.
Tequipment Jul 7, 2021
Page7of19

9InstallationandConversionInstructions
Figure10
2.2.4 Pullprotectivefilmoffthe front
camera retainerplate(
 Figure
10-top-).
1– Protectivefilm
2– Frontcamera
3– 3M privacy film
4–Interiormirror
Information
Observethefollowingpointsduring
positioning/alignment:
• Sufficientdistancebetween
frontcameraandinterior
mirrorbase: atleast5mm/
0.2in!
• Getanotherpersonstanding
infrontofthevehicleto check
andconfirmthehorizontalalignmentofthe camerawiththePORSCHElogo!
Alignfrontcamerawithretainerplatesymmetricallywith respecttothe3Mprivacy
film(
 Figure10-bottom-).
2.2.5 Pressfrontcamerawithretainerplatefirmlyontothe3Mprivacyfilm on the wind-
shield.
3 Routeandconnectelectricwire harness
Figure11
Jul 7, 2021
Page8of19 Tequipment
Taycan (Y1A)
9163 ENU 09/21

InstallationandConversionInstructions Taycan (Y1A)
09 /21 ENU 9163 9
2– InstallationpositionofPORSCHEfrontcamera(dashcam)
3– Electricwireharness
4– Fuseboxondashboard(attheleft)
5–Groundpin
Linerouting(
 Figure11):
•Frontcamera→headliner/roofconsole→alongwindshieldframe→leftA-pillar(top) →along
A-pillar→fusecarrierondashboardattheleft→leftgroundpin.
3.1 Routingwireharness
Figure12
3.1.1 Ontheconnectorside,push one
protectivefoamrollontothe wire
harnessforthefrontcamera
retainerplateandthe(3-wire)wire
harness.
1– Protectivefoam roll
2– Wireharnessonfront
cameraretainerplate
3– Wireharness(3-wire)
4– Connectionforwire
harnessonretainerplate
3.1.2 Connectplugconnection(3-pin)(

Figure12-Arrows-).
3.1.3 Guidewireharnessforfrontcamera(dashcam)verticallywithrespectto the
headliner/roofconsole.
Figure13
3.1.4 Pushprotectivefoamrolloverthe
(3-pin)plugconnection.
Secure(3-pin) plug connection
andconnectionforfront camera
wiringharnessto existing
components/lines under the
headlinerintheroofconsolearea
withtie-wraps(
 Figure13-1-).
Installevenlyspaced foamrolls
undertherooflining.
 Figure13
-2-
Tequipment Jul 7, 2021
Page9of19
1–Interiormirror

9InstallationandConversionInstructions
Figure14
3.1.5 Route the restofthe wireharness
 Figure14-1- totheleftfuse box
 Figure14-2- asfollows;shorten
the wiring harness asrequiredand
attach contacts.
1– Wireharnessforfront
camera(dashcam)
2– Fusecarrierondashboard
(left)
• Roofconsole→under
headlineralongwindshield
frame→leftA-pillar(top)→
alongA-pillar→fusecarrieron
dashboard(left
 Figure14
-2-)→BK0.5²line→ground
pin
3.2 Connectelectricwireharness
Function/line: Connection point - LHD
vehicle
Ground
Terminal31=BK;0.5² Cablering eyelet (N.017.506.5)onleft
groundpinnexttofuse
boxunder carpet
Ignitionpositive
Terminal15=GN;0.5² Socketcontact N.907.326.01 in fuse
holder, White fuse latch D, fuse 2
5 amp fuse, small
Permanentpositive
Terminal30=RD;0.5² Socket contact N.907.326.01 in fuse holder,
BrownfuselatchB,fuse 8
5 amp fuse, small
3.2.1 Removefuseholderandopen rowsDandB.  WorkshopManual 'Looseningand
securingfuseboxinfootwell'
3.2.2 Connectpowersupplyas shown inthetable.
3.2.3 Protectfront camera power supply by insertingnew small 5 amp fuses inslots2
and8.
Fuse: Required value 5 A
Jul 7, 2021
Page10of19 Tequipment
Taycan (Y1A)
9163 ENU 09/21