PortKeys HH7 User manual

SHENZHEN PORTKEYS ELECTRONIC TECHNOLOGY CO.,LTD
HH7
User Manual
Company Address : 1406 14th Floor Block D Building 3
Phase I Tianan yungu Longgang district Shenzhen
Guangdong China
Factory Address : No.2nd Floor Building A Jingjiang Industrial
Park NO.101 Shangwei Road Longhua District Shenzhen
Guangdong China
Service Hotline : [phone] Email : [e-mail]
Website : www.portkeys.shop

HH7 HH71 2
Parameter
Product appearance size Standard accessories
EXIT Dvtupn!gvodujpo
lfzt
Power Switch
Fyufoe!Joufsgbdf
Tmjejoh!nfov
倗wpmvnf,0.倛
JOQVU
ED!qpxfs
Bvejp!ifbeqipof
pvuqvu
IENJ
VTC!vqhsbefф
qpsu
2:1nn
235nn
31nn
7”
Operating temperature range: 0 ℃ ~ 40 ℃
Size
Dimension
Viewing Angle
Brightness(nit)
Resolution
Contrast Ratio
Weight
Color
Backlight
Material
Input Voltage
Power Consumption
Signal input
Signal output
Headphone
Menu Language
7"
190x124x20mm
178°H/178°V
1200
1920X1200
1200:1
300g
8bit（16.7M Color）
LED
ABS Engineering Plastics
DC 7 ~24V
10W
4K HDMI、HDMI、USB
4K HDMI、HDMI
Output
简体中文/English
Screen Cleaning Wipe X1
D-Tap cable to 4-Pin Female
Headphone Cable X1
HH7 Monitor X1
Warm Prompt Card X1
U Disk(Instructions
for use is enclosed) X1
-
+OUT
+IN
Picture Size: 7 inch
Resolution: 1920X1200
Luminance: 1200 nits
Color: 16.7M
Operating Volts:DC 7~24V
HDMI Input/output: 480i/p 576i/p
720p 1080i/p 2160p
Email:[e-mail]
www.portkeys.shop

Email:[e-mail]
www.portkeys.shop
HH7 HH73 4
Brightness
Contrast
Chroma
Sharpness
Tint
Color Temperature
Backlight
Manual
Red
Green
Blue
Back
0~255
0~255
0~255
User
Aspect
Wide
Height
Back
H（Custom）
V（Custom）
Guide Masks
Crosshair
Grids
Back
【MAIN】
Off/80%/90%/15:9/1.33:1/
1.5:1/1.85:1/2:1/2.35:1/Custom
1%～100%
Off/On
1%～100%
Off/On
1/2/3/4/5/6/7/8/9/10/Off
Press MENU
Press MENU
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
HDMI
Wireless Video
Back
HDMI
Wireless Video
Guides
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Supported input resolution and frame rate
Supported output resolution and frame rate
HDMI Signal
4096 x 2160p@24Hz
3840×[email protected],24Hz,25Hz,29.97Hz,30Hz
1920×[email protected],24Hz,25Hz,29.97Hz,30Hz,50Hz,59.94Hz,60Hz
1920×[email protected],24Hz,25Hz,29.97Hz,30Hz
1920 x 1080i@50Hz,59.94Hz,60Hz
1280 x 720p@50Hz,59.94Hz,60Hz
720 x 576p@50Hz
720 x 576i@50Hz
720×480p@50Hz,59.94Hz,60Hz
720×480i@50Hz,59.94Hz,60Hz
HDMI Signal
4096 x 2160p@24Hz
3840×[email protected],24Hz,25Hz,29.97Hz,30Hz
1920×[email protected],24Hz,25Hz,29.97Hz,30Hz,50Hz,59.94Hz,60Hz
1920×[email protected],24Hz,25Hz,29.97Hz,30Hz
1920 x 1080i@50Hz,59.94Hz,60Hz
1280 x 720p@50Hz,59.94Hz,60Hz
720 x 576p@50Hz
720 x 576i@50Hz
720×480p@50Hz,59.94Hz,60Hz
720×480i@50Hz,59.94Hz,60Hz
0～100
0～100
0～100
0～100
5600K/6500K/7500K/9300K/Manual
50~100
50~100
User/Full/16:9/15:9/
1.33:1/1.5:1/1.85:1/2:1/2.35:1
User/Full/16:9/15:9/
1.33:1/1.5:1/1.85:1/2:1/2.35:1
Back
Low/Middle/High
0/10/20/30/40/50/60/70/80/90/100
5Sec/10Sec/15Sec/20Sec/25Sec/30Sec/Off
Low/Middle/High/Off
Press MENU, Then
Press MENU, Then
Press MENU, Then
[Input Source]
[System Config]
[Guides]
[Video Config]
Aspect
OSD-Language
OSD-Duration
OSD-Transparancy
简体中文/English

Email:[e-mail]
www.portkeys.shop
HH7 HH75 6
Press MENU
Menu Setup
System Reset Are you sure? Yes/No
Press MENU, Then
Press MENU, Then
Low Battery ALM
Back
Off/On
Press MENU
Display Flip Mode
H Flip
V Flip
Osd Flip Mode
H Flip
V Flip
Back
Off/On
Off/On
Off/On
Off/On
Off/On
Off/On
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
[Function Setup]
Firmware Ver HH7-V1.08.18
Press MENU
Press MENU Are you sure? Yes/No
Press MENU, Then
Version Information
Update (USB)
Back
[Firmware]
[Exit]
Flip Control
User1/User2/User3/User4/User5
*Note: Set these functions in the
custom shortcut function key,
long press in 3 seconds to display
the menu of this function.
* Note: Continuous click on the
button, you can cycle switch.
* Note: Click on the button and
toggle the wheel to adjust
parameters.
Function 2（Same function 1）
Function 3（Same function 1）
Function 4（Same function 1）
Back
Function 1 Press MENU
*Audio Meters
4K Convert to 1080
*Pixel To Pixel
Brightness*
Contrast*
Chroma*
Sharpness*
Tint*
Color Temperature*
Aspect*
Backlight*
Display Flip
Osd Flip
Check Field*
H/V Delay*
*Guides*
*Cross Hair
*Grids*
*Peaking
*Programmable False Color
*Zebra
*UnderScan
DSLR Scaling*
*Histogram
*Easy to Zoom in/out
Please pay attention to the official website (www.pkscorp.com) update the latest firmware!
*LUT file could be stored repeatedly,to delete,please enter the user storage interface and delete it
by the above steps.LUT file format Cube，support16/17/32/33/64/65 precision (LUT_3D_SIZE).
Copied the cube format LUT file to the U disk, then insert it to HH7 USB interface.
Press MENU Press MENU
Press MENU
Press MENU
Press MENU
Press EXIT
USB Looks 3D LUT
USB drive
Return
EXIT
Press MENU
Press MENU
Stored from
USB
Select LUT fileStored LUT configuration
Back
Apply 3D LUT mode and it will be
saved automatically to "user storage"
+
[LUT Config]
)Offet!up!cf!qfsgpsnfe!jo!uif!tubuf!pg!bddftt!tjhobm*
Back
LUT File Deletion
Ztf0Op
Hold the MENU Delete
Are you sure?
Press MENU
Stored from
USB
Stored LUT configuration

Email:[e-mail]
www.portkeys.shop
HH7 HH77 8
*Shortcut keys (hidden menu operation) Operation：
-240~+240
-240~+240
Middle/L+T/R+T/R+B/L+B/User
[Pixel To Pixel Setting]
Long press in 3 sec set "Pixel To Pixel" onto one custom function key
Position
X Offset
Y Offset
Exit
Press MENU, Then
Press MENU, Then
Press MENU, Then
The resolution of the input signal is different and the offset value changes.
On/Off
[Audio Meters ]
Audio Meters
Position
Blending
Exit
0~100
Top/Left/Division/Right/Bottom
Long press in 3 sec set "Audio Meters" onto one custom function key
Press MENU, Then
Press MENU, Then
Press MENU, Then
Long press in 3 sec set "Guides" onto one custom function key
[Guides Setting]
Off/80%/90%/15:9/1.33:1/
1.5:1/1.85:1/2:1/2.35:1/Custom
1%-100%
1%-100%
0~50
Off/On
White/Red/Green/Blue/Black
Guides
H（Custom）
V（Custom）
Color
Thickness
Guide Masks
Exit
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Long press in 3 sec set "Cross Hair" onto one custom function key
[CrossHair Setting]
0%~100%
0%~100%
On/Off
White/Red/Green/Blue/Black
Crosshair
Color
X Offset
Y Offset
Exit
Press MENU, Then
Press MENU, Then
Press MENU, Then
Press MENU, Then
Grids
Color
Exit
[Grids Setting]
Off/1/2/3/4/5/6/7/8/9/10
White/Red/Green/Blue/Black
Long press in 3 sec set "Grids" onto one custom function key
Press MENU, Then
Press MENU, Then
Red/Green/Blue/Black/White
[Peaking Setting]
Long press in 3 sec set "Peaking" onto one custom function key
Factor
Color
Exit
1/2/3/4/5/6/7/8/9/10
Press MENU, Then
Press MENU, Then
[False Color Setting]
Under Warn
Over Warn
Tooltip
Exit
85～110
-10～15
Long press in 3 sec set" False Color "onto one custom function key
Press MENU, Then
Press MENU, Then
Press MENU, Then Off/On

Email:[e-mail]
www.portkeys.shop
HH7 9HH7 10
This manual is prepared based on the software version installed at the factory. With the
continuous upgrade of the software, the software operation after the upgrade may be
different from the book, and it will be changed without further notice,please have your
understanding.
Long press in 3 sec set "Zebra" onto one custom function key
[Zebra Setting]
On/Off
85～110
-10～15
Under Warn
Over Warn
Tooltip
Exit
Press MENU, Then
Press MENU, Then
Press MENU, Then
[UnderScan Setting]
Long press in 3 sec set "UnderScan" onto one custom function key
Exit
Fator 50～100
Press MENU, Then
Long press in 3 seconds "MENU" button to display the custom function
key and image configuration information
[Zooming Setting]
Position
X Offset
Y Offset
Long press in 3 sec set "Zooming" onto one custom function key
Middle/L+T/R+T/R+B/L+B/User
-480~+480
-270~+270
Press MENU, Then
Press MENU, Then
Press MENU, Then
The resolution of the input signal is different and the offset value changes.
Ratio
H:
V:
Exit
User/X1.5/X2/2.5/X3
X1.01~x3.00
X1.01~x3.00
Press MENU, Then
Press MENU, Then
Press MENU, Then
[Histogram Setting]
On/Off
Small/Large
R+B/L+B/L+T/R+T
Position
Size
Transparent
Exit
Press MENU, Then
Press MENU, Then
Press MENU, Then
Long press in 3 sec set "Histogram" onto one custom function key