pottery barn kids ZOEY User manual

Date: 2016-Jun.- 07
Rev: Page1of8



pottery barn kids
ZOEY TODDLER BED CONVERSION KIT
www.potterybarnkids.com

Date: 2016-Jun.- 07
Rev: Page2of8
WARNING ENTRAPMENT/STRANGULATION
HAZARD:
Infants have died in toddler beds from entrapment and strangulation.
Failure to follow these warnings and assembly instructions could result in serious injury or
death.
NEVER use bed with children under 15 months.
NEVER place bed near windows where cords from blinds or drapes may strangle a child.
Read all instructions before assembling toddler bed. KEEP INSTRUCTIONS FOR
FUTURE USE.
DO NOT use a water mattress with this toddler bed.
Never use plastic shipping bags or other plastic film as mattress covers because they can
cause suffocation.
DO NOT place bed near windows where cords from blinds or drapes may strangle a child.
Do not place items with a string, cord, or ribbon around the child’s neck, such as hood
strings or pacifier cords.
Do not suspend strings over a toddler bed or attach strings to toys.
If refinishing, use a non-toxic finish specified for children's products.
If included, always use guardrail(s).
CAUTION: ANY MATTRESS USED IN THIS TODDLER BED MUST BE AT LEAST 27 ¼" (69
CENTIMETERS) BY 51 5/8" (131 CENTIMETERS) WITH A THICKNESS NOT EXCEEDING 6"
(15 CENTIMETERS) BUT AT LEAST 4” (10 CENTIMETERS).
THIS BED IS FOR CHILDREN OVER 15 MONTHS OF AGE WEIGHING NO MORE THAN 50
POUNDS (22.7 kg). 04-000032-7
IMPORTANT SAFETY INSTRUCTIONS:
Please read all instructions carefully before assembling.
For your safety, assembly by two or more adults is recommended.
Keep instructions for future use.
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the
structural integrity of the item.
Do not remove warning labels from the crib. Labels are permanent and not designed to be removed.
PRE-ASSEMBLY:
Remove all parts and hardware from the box and place them on a carpet, or scratch-free work
surface, as this will avoid damaging parts during assembly. The shipping box provides an ideal work
surface.
To avoid accidentally discarding small parts or hardware, do not dispose of any packaging or contents
of the shipping carton until assembly is complete.
Use the parts and hardware lists below to identify and separate each of the pieces included.
The illustrations provided allow for easier assembly when used in conjunction with the assembly
instructions.
The use of power tools to aid in assembly in not recommended. Power tools can damage hardware
and split wood.

Date: 2016-Jun.- 07
Rev: Page3of8
PARTS INCLUDED:
(O) Guard Rail (1x)
CRIB PARTS (Sold separately):
(A) CRIB END (2x)
(B) CRIB STATIONARY SIDE (2x)
(C) MATTRESS BASE (1x)
HARDWARE INCLUDED (From Crib):
(D) Allen key with ball tip 4 x 110mm - 1x (E) Long Allen Bolt 1/4” x 2-1/4” - 2x
(F) Medium Allen Bolt 1/4” x 1-3/4”-1x (G) ShortAllen Bolt 1/4” x 3/4” - 4x

(I) Half-moon washer 1/4” x 20 x 10mm – 2x

Date: 2016-Jun.- 07
Rev: Page4of8
ASSEMBLY INSTRUCTIONS:
1. Remove mattress base (C) as shown below.
*Note: Keep the bolts (G) for later use on Toddler bed assembly.













































Date: 2016-Jun.- 07
Rev: Page5of8
2. With the help of another adult, carefully turn the crib and place it on a scratch-free surface as shown
below.
3. Remove one crib side (B) as seen in the illustration below.
Note: Keep (E, F & I) aside for later use on toddler bed assembly.


















4. Attach (O) to (A) by spreading (A) and aligning pre-drilled holes on (A) to pre-installed wooden
dowels. Ensure the cut-out on (O) facing inward as shown below.
*Tip: See Image A for ease of assembly. Do not over tighten.
Image A

Date: 2016-Jun.- 07
Rev: Page6of8
5. Turn assembled Toddler bed Kit upright.
O

Date: 2016-Jun.- 07
Rev: Page7of8
6. NOTE: The mattress base (C) must be at the lowest level (level 1) for a toddler bed.
With the help of an adult, carefully place (C) into the toddler bed by carefully not to scratch the finish.
Secure (C) to (A) at lowest position (Level 1) as shown below. Do not over tighten the bolts.
Level 1
Level 3
Level 2

Date: 2016-Jun.- 07
Rev: Page8of8
7. Check alignments and fully tighten all connections at this time. Do not over tighten.
8. Assembly is now complete.
9. Place the assembly instructions back into the envelope mounted on the mattress base for future
reference.
CARE INSTRUCTIONS
Dust often using a clean, soft, dry, lint-free cloth.
Blot spills immediately, and wipe with a clean, damp cloth.
We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered
finish.
If the crib is to be stored, store in cool dry place and carefully package all original hardware to protect
from loss or damage.
Check fasteners periodically for tightness. DO NOT over tighten, as this may cause distortion or
breakage.
Parents should ensure a safe environment for the child by checking the crib regularly that every
component is properly and securely in place, before placing the child in the product.
Thank you for your purchase.
stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181