PotteryBarn Pharmacy Bath Cart User manual

Page 1of 3
Pharmacy Bath Cart White
Assembly Instructions
Please read all instructions before beginning assembly.
For your safety and convenience, assembly by two people is recommended.
Use the parts and hardware lists to identify and separate each of the components included.
Save all packing materials until assembly is complete to avoid the accidental discarding of smaller parts or
hardware.
Tools Required:
(1) Open Wrench
Parts Included:
(1) Cabinet - A (2) Shelf - B
Hardware Included:
(4) Spring Washer - a (8) Shelf Support –b
(2) Caster with Brake - c (2) Caster - d

Page 2of 3
Assembly Instructions:
1. Assemble the cabinet on scratch-free surface such as a carpet or rug.
2. Carefully lay the cabinet (A) on its back，then attach each caster with brake (c) and caster (d) through the spring
washer (a) to the bottom leg of cabinet as shown. Tighten by hand at first. Securely tighten the leg with
caster (c & d) with open wrench. See Figure 1.
3. Turn the assembled case to an upright position. Insert the shelf supports (b) into the desired holes inside
cabinet (A), then lay the shelf (B) on the shelf supports. See Figure 2.
Figure 1
Figure 2

Page 3of 3
4. The assembly is now complete. See Figure 3.
Care instructions:
Dust with a clean, soft, damp cloth. Wipe dry immediately.
Avoid the use of chemicals and harsh cleaning agents.
thank you for your purchase.
stores | catalog | www.potterybarn.com
Figure 3