Poulan Pro HDF825 Owner's manual

REPAIR PARTS MANUAL
MODEL:
HDF825
FRONT TINE TILLER
ALWAYS WEAR EYE PROTECTION DURING OPERATION
Visit our website: www.poulan-pro.com
IMPORTANT MANUAL Do Not Throw Away
410236 Rev 1 12.05.07 TH
Printed in U.S.A.

2
1 187820X428 Bracket, Handle
2 72140512 Bolt, Carriage 5/16-18 x 1-1/2
3 165787 Grip, Handle
4 166376 Handle, L.H.
5 73680500 Nut, Hex, Crownlock 5/16-18
6 19111116 Washer 11/32 x 11/16 x 16 Gauge
7 19121414 Washer 3/8 x 7/8 x 14 Gauge
8 74760520 Bolt, Hex Head 5/16-18 x 1-1/4
9 74760516 Bolt, Hex Head 5/16-18 x 1
10 10040500 Washer, Lock 5/16
11 73220500 Nut, Hex 5/16-18
12 98000129 Nut, Hex, Flanged 5/16-18
KEY PART
NO. NO. DESCRIPTION
KEY PART
NO. NO. DESCRIPTION
13 180847 Bolt, Carriage, Gr. 5 5/16-18 x 3/4
14 181452X428 Panel, Handle
16 166377 Handle, R.H.
19 188562 Tine Control Lever Assembly
(Includes Cable)
20 188555 Pin, Pivot
29 12000059 Retaining Ring
43 188177 Cable Assembly, Reverse
44 181580 Clip
NOTE: All component dimensions are given in U.S.
inches. 1 inch = 25.4 mm
1
2
3
3
16
4
5
6
78
9
12
14
44
13
11
10
43
29
19
20
FRONT TINE TILLER – MODEL NUMBER HDF825 (MFG. ID. NO. 96082000300)
HANDLE ASSEMBLY

3
KEY PART
NO. NO. DESCRIPTION
19 188502 Bolt, Belt Guard
20 12000036 Ring, Klip
21 73350600 Nut, Hex, Jam 3/8-16
22 161806 Pulley, Idler
23 175377 Arm, Idler
24 74760620 Bolt, Hex Head 3/8-16 x 1-1/4
25 106968X Shaft, Idler Arm
26 73350500 Nut, Hex, Jam 5/16-18
27 73220400 Nut, Hex 1/4-20
28 10040400 Washer, Lock, HH Spring 1/4
29 109227X Pad, Idler
30 23200404 Set Screw, Headless, C.P.
1/4-20 x 1/4
31 101189L Sheave, Engine
32 151223 Pulley, V-Groove, Transmission
41 180307 Spring
42 138909 Spacer
NOTE: All component dimensions are given in U.S.
inches. 1 inch = 25.4 mm
KEY PART
NO. NO. DESCRIPTION
1 180377 Bracket Assembly, Belt Guard
2 9484R Clip, Cable
3 86777 Screw, Hex Washer Head, Slotted,
Thread Cutting #10-24 x 1/2
4 74610812 Bolt, Hex Head 1/2-20 x 3/4
5 73680600 Locknut, Hex 3/8-16
6 19131316 Washer 13/32 x 13/16 x 16 Gauge
7 2009J Pulley, Idler, Reverse
8 180323 Reverse Idler Arm Assembly
9 74760628 Bolt, Hex Head 3/8-16 x 1-3/4
10 194630X428 Guard, Belt
11 19091016 Washer 9/32 x 5/8 x 16 Gauge
12 104213X Nut, Hex, Cap 1/4-20
13 72140406 Bolt, Carriage 1/4-20 x 3/4
14 133035 V-Belt (Forward Motion)
15 2614J V-Belt (Reverse)
16 12000028 Ring, Retainer
17 2649M Key, Square
18 151236 Pulley, Flat, Transmission
41 1
2
3
4
542
678
29
11
9
17
31
30 29
11
11
11
10
14
15
12
12
13
16
19
32
18
20
25
21
22
23
24
26
28
27
FRONT TINE TILLER – MODEL NUMBER HDF825 (MFG. ID. NO. 96082000300)
BELT GUARD AND PULLEY ASSEMBLY

4
6
7
8
13
9
10
11
22
15
3
24
54
7
4
5
17
16
18
18
21
17
16
2
2
13
24
19
19
20
20
1 9194R Pin, Clevis
2 74760520 Bolt, Hex Head 5/16-18 x 1-1/4
3 74760512 Bolt, Hex Head 5/16-18 x 3/4
4 73220500 Nut, Hex 5/16-18
5 10040500 Washer, Lock 5/16
6 73800600 Locknut, Washer Insert 3/8-16
7 4921H Clip, Hairpin
8 1952J Support, Depth Stake, R.H.
9 122233X Stake, Depth
10 326J Pin, Clevis
11 74780628 Bolt, Hex Head 3/8-16 x 1-3/4
13 1951J Support, Depth Stake, L.H.
KEY PART
NO. NO. DESCRIPTION
15 5388J Spring, Stake
16 121117X Bolt, Shoulder
17 9188R Wheel
18 19131311 Washer 13/32 x 13/16 x 11 Gauge
19 9190R Bracket, Wheel
20 73680600 Nut, Hex, Crownlock 3/8-16
21 74760516 Bolt, Hex Head 5/16-18 x 1
22 73800500 Locknut, Washer Insert 5/16-18
24 73970500 Nut, Hex, Flangelock
NOTE: All component dimensions given in U.S. inches.
1 inch = 25.4 mm
KEY PART
NO. NO. DESCRIPTION
FRONT TINE TILLER – MODEL NUMBER HDF825 (MFG. ID. NO. 96082000300)
WHEEL AND DEPTH STAKE ASSEMBLY

5
FRONT TINE TILLER – MODEL NUMBER HDF825 (MFG. ID. NO. 96082000300)
TINE ASSEMBLY
KEY PART
NO. NO. DESCRIPTION
1 156934 Tine, Outer, R.H.
2 3146R Retainer, Spring
3 156932 Tine, Inner, R.H.
4 156931 Tine, Inner, L.H.
5 156933 Tine, Outer, L.H.
6 4929H Pin, Clevis
3
1
6
4
5
6
2
2

6
FRONT TINE TILLER – MODEL NUMBER HDF825 (MFG. ID. NO. 96082000300)
TRANSMISSION
KEY PART
NO. NO. DESCRIPTION
14 9173R Spacer, Split
16 19091412 Washer 9/32 x 7/8 x 12 Gauge
17 19092016 Washer 9/32 x 1-1/4 x 16 Gauge
18 10040400 Washer, Lock 1/4
19 74610412 Bolt, Hex Head, Grade 5
1/4-28 x 3/4
20 - - - Engine, Briggs & Stratton, Model
Number 126302 (Order parts from
engine manufacturer)
NOTE: All component dimensions given in U.S. inches.
1 inch = 25.4 mm
2
3
5
6
8
11
16
17
11
10
7
19
14
10
12
18
10
14
1
20
KEY PART
NO. NO. DESCRIPTION
1 74760524 Bolt, Hex Head, Grade 2
5/16-18 x 1-1/2
2 74780652 Bolt, Hex Head 3/8-16 x 3-1/4
3 19131311 Washer 13/32 x 13/16 x 11
5 73900600 Nut, Hex, Flangelock 3/8-16
6 9057R428 Shield, Tine
7 188195 Bracket, Engine, R.H.
8 165834 Bracket, Engine, L.H.
10 73970500 Nut, Hex, Flangelock
11 187912 Bolt, Shoulder
12 151222 Transmission

7
FRONT TINE TILLER – MODEL NUMBER HDF825 (MFG. ID. NO. 96082000300)
DECALS
KEY PART
NO. NO. DESCRIPTION
1 403653 Decal, Poulan Pro
2 410308 Decal, Poulan Pro, 825 Series / 26"
3 157378 Decal, Forward and Reverse
4 121753X Decal, Reverse, Tine Control
5 110614 Decal, Hand Placement
6 410854 Decal, Engine
7 410853 Decal, OHV, I/C
8 162384 Decal, Warning
9 157381 Decal, Heavy Duty
10 411816 Decal, Rewind Starter
11 120076X Decal, Warning, Rotating Tines
- - 410235 Manual, Operator’s, English / French
- - 410236 Manual, Repair Parts
1
2
3
9
8
7
4
5
10
11
6

This product has been expertly engineered and carefully manufactured to rigid quality standards. As with all
mechanical products, some adjustments or part replacement may be necessary during the life of your unit.
For Parts and service, contact our authorized distributor: call 1-800-849-1297
• For replacement parts, have available the following information:
a. Model Number/Manufacturer's I.D. Number
b. Description of part.
For Technical Assistance: call 1-800-829-5886
For a Parts Manual, go to our website: www.poulan-pro.com/support.asp
NOTE: HOP provides parts and service through its authorized distributors and dealers; therefore,
all requests for parts and service should be directed to your local dealer(s). The philosophy
of HOP is to continually improve all of its products. If the operating characteristics or the
appearance of your product differs from those described in this Manual, please contact your
local dealer for updated information and assistance.
PARTS AND SERVICE