PowAir Misting Dome User manual

Images are for illustration purposes only, actual product may vary.
Imported by: Mariner Packaging Company Ltd
www.PowAir.co.uk / [e-mail] / 01472 426 500
Misting Dome
Operating Instructions
PowAir Misting Dome
Liquid outlet drain
Air intake
DC socket
Air intake of liquid tank
Inner lid of liquid tank
Mist vent
Outer lid of liquid tank
Light button
Indicator light
Mist button
Maximum liquid ll line
Liquid tank
Liquid tank air outlet
DC plug
AC adapter
Parts Operating Manual for PowAir Misting Dome
1. Straighten the Misting Dome (position the lid at the top,
facing upwards), push open the lid and ll with liquid. If
there is liquid in the tank, do not tilt the product.
2. Plug the DC end of AC adapter into DC socket of the
Misting Dome.
3. Do not ll beyond the maximum ll line, as indicated.
Avoid pouring any liquid outside of the water tank.
Do not ll while product is in use.
Do not attempt to ll with hot water.
4. Keep the Misting Dome level while lling with liquid,
after the tank is full, carefully place it on to a at and level
surface.
5. Cover the lid and then fasten it onto the tank, do not tilt
the unit. Liquid in the tank is liable to spill out when tilting
due to the structural character of the product. If tilting
occurs, liquid in the tank may ow into the inner electric
circuit of the product, which may cause malfunction.
6. Connect the plug end of the AC adapter to a household
power socket, the Misting Dome beeps once when powered
on. (Only use the AC adapter provided).
7. Conrm that the machine is powered on, that the liquid
level is within range and that the product lid is closed.
Push the misting button and select a light colour. Enjoy
your misting dome!
Do not ll over the max ll line.
PowAir Misting Dome
MADE IN P.R.C.

PowAir Misting Dome PowAir Misting Dome
1. Press the mist button for a short while, the misting function will be activated (The default setting is
for continuous mist). Press the misting button again to switch between timed hourly, 3 hourly and 5
hourly misting modes. The current mode will be indicated by an LED status light. Press and hold the
mist button to de-activate the misting function.
2. If the liquid tank is empty, or below the minimum level, the sensor will automatically turn o the
misting function. To continue misting, rell the liquid tank and press the mist button for a short
while, misting will be reactivated.
3. Light button: press the light button for a short while to activate the LED Lighting mode. Once
active, press the light button again to select an indvidual colour. There are 8 colours to choose from,
pressing the light button will cycle through the colours. Press and hold the light button to
de-activate the lighting function. (Light function can be used without the misting mode being
active)
Product parameters:
Instructions for the Misting Dome functions:
Do not use the Misting Dome on a slope or
in un-steady places.
If liquid ows into the air inlet by accident
when using the Misting Dome, turn o the
power immediately, lay the main body at,
let the liquid drain o from the liquid outlet
drain and dry the inner areas before re-use.
Do not attempt to disassemble, modify or
repair the product.
This product is not a medical ventilator;
mist sprayed from the unit should not be
directly inhaled.
Please do not scratch, bend, warp or pull the wire that is connected to the power adapter.
Please do not subject the wire to high temperatures. Please do not grind the wire with heavy
objects. If the adapter is damaged, please do not continue using.
Maintenance: please use a neutral household detergent to clean the product. Do not use harsh
detergents. Any detergent residuals within the water tank should be avoided as harmful gas or
other malfunctions may occur during use.
If maintenance or liquid lling is required, please remove the power
adapter from the socket. Do not attempt to remove the power adaptor with
wet hands.
Please do not place the product within reach of children.
Do not block the air inlet or outlet of the Misting Dome.
If maintenance is needed, or the liquid in the tank needs to be drained, please follow the
instructions for draining the tank from the manual. Improper operation may cause the liquid to
ow into the main machine areas and damage the circuit board.
Please do not touch the ultrasonic atomizer plate by hand or with hard objects as damage may
occur.
Please read the safety precautions carefully, if safety is neglected, improper use of the Misting Dome
could cause harm and damage the product.
PowAir Misting Dome
Safety Precautions. Please follow this guide carefully.
Unscrew the top lid from the
bottom half and set aside.
Pour the PowAir Liquid into your Misting Dome
and fasten the top lid with the bottom.
Plug in your dome, set the timer
and lighting and you’re good to go!
MIST/TIMER
ON 1H 3H 6H
LIGHT