Power Craft PLS-52 Technical manual

User Guide & Warranty
1500W LOG SPLITTER
After Sales Support
Now you have purchased a Power Craft
product you can rest assured in the
knowledge that as well as your 3 year
parts and labour warranty you have
the added peace of mind of dedicated
helplines and web support.
AFTER SALES SUPPORT
UK / NORTHERN IRELAND HELPLINE: 0870 7323023
REPUBLIC OF IRELAND HELPLINE: 1800 481005
WEB SUPPORT: WWW.OMEGAWOLF.COM/POWERCRAFT
MODEL NUMBER: PLS-52
In order to deal with your enquiryas quickly and efficiently as possible, we ask you to send your
enquiryby email ([email protected]). Do not forget to include your name, address and a
daytime telephone number.
Alternatively,you can contact our freephone service hot-line on the number given below.
Office hours areas follows:
Mon - Fri: 8 am - 6 pm, Sat: 10 am - 2 pm, Sun: 10 am - 4 pm
UK / NORTHERN IRELAND HELPLINE:
0870 7323023
REPUBLIC OF IRELAND HELPLINE:
1800 481005
WEB SUPPORT:
www.omegawolf.com/powercraft
Omega, Interex House, Prospect Close, Lowmoor Business Park
NG17 7LF Kirkby In Ashfield, England
Replacements or repairs under guarantee regulations are free of charge.
GB/IRE-0706-28
Name:
Address:
Contact Telephone No.:
E-mail:
Location of purchase:
Fault Description:
If you are requested by the manufacturer to return the item for
repair please complete the enclosed section and send it together
with your product and your receipt (proof of purchase) to the
service address shown below.
1500W LOG SPLITTER
PLS-52

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 19
Warranty
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 02
Contents
03 Introduction
04 Machine specifications
06 Safety instructions
-General safety instructions
-Additional safety instructions
10 Assembly
-Mounting the support leg
-Bleed screw
-Max pressure limiting screw
11 Operation
-Two hand control
-Placing the log on the splitter
-Freeing a jammed log
13 Maintenance
18 Exploded view
19 Warranty
WARRANTY CERTIFICATE
Year of manufacture: 11/2007 Log splitter PLS-52
Congratulations! You have made an excellent choice with the purchase of this Quality
product. Our commitment to quality also includes our service. Should you, contrary to
expectations, experience defects due to material or manufacturing faults during private use
within 36 months of the date of purchase we shall be liable for warranty in accordance with
statutory warranty regulations, provided that: - The device was not put to any use other than the intended.-
Was not overloaded. - Was not used with the wrong accessories. - Repairs where not carried out by any
other than the authorised workshop. The warranty certificate is only valid in connection with the receipt.
Please keep both in a safe place. The warranty does not affect your statutory rights.
The product is guaranteed for a period of three years beginning on the day of purchase. Keep your purchase
receipt safe as proof of the date of purchase. The guarantee period can only be extended for the duration of
any repair required.
During the warranty period, defective devices can be sent FREIGHT PREPAID to the service address stated at
the end of this booklet. We will, at our discretion either repair or exchange the device in accordance with
warranty legislation.
Please include the following when sending in your product for repair:
1. The receipt (proof of purchase)
2. This warranty certificate with your name, address, contact details and a fault description
completed overleaf.
If the original receipt is not enclosed the repair will be charged for in all cases. After the warranty has
expired you can still send defective devices for repairs FREIGHT PREPAID to the address at the end of this
booklet. Quotes as well as repairs after warranty period are to be paid for in all cases. Ensure the product is
sent well packed as no responsibility can be accepted for items lost or damaged in transit. This warranty
does not affect your statutory rights.
EC DECLARATION OF CONFORMITY
We Ferm B.V.
Lingenstraat 6, 8028 PM Zwolle, The Netherlands
declare that the design and construction of the following machine, in the form supplied by us, comply with
the requirements of the appropriate EC directives.
Product Description: 1500W LOG SPLITTER
Model: PLS-52
Appropriate EC directives: 98/37EEC, 73/23EEC, 89/336/EEC, 2002/95/EC, 2002/96/EC
Applicable harmonised norms: EN60745-1, EN60745-2-17, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
J.A. Bakker - van Ingen J. Lodewijk
CEO Ferm B.V. Quality Manager Ferm Global 11/2007

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 03
Introduction
Congratulations on choosing to buy a Power
Craft product.
By doing so you now have the assurance and peace of mind that comes with
purchasing a product made by one of Europe’s leading manufacturers.
All products brought to you by Power Craft are manufactured to the highest
standards of performances and safety, and, as part of our philosophy for
customer service and satisfaction, are backed by our comprehensive
3Year Warranty.
We hope you will enjoy using your purchase for many years to come.
Always read the instructions for electrical products carefully before
use. It will help you understand your product better and avoid unne-
cessaryrisks. Keep this instructions manual in a safe place for future
use.
Introduction
This log splitter has been designed for professional / DIY log splitting. Check the
machine for loose parts and accessories from transportdamage.
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 18
Exploded view
Parts list
No. Description Position
501480 Wheel 19 till 21
501481 Wheel frame 22
501472 Pressure safety valve (set) 33 till 41
501473 Control valve (set) 45 till 57
501471 Cylinder cover (left) 58
501479 Log support plate for FLS-52 62 till 63
501470 Lift handle 67
501474 Cylinder cover (right) 74
501476 Bleed screw 75
501469 Cylinder seal set 59, 69, 70, 71, 76
501477 Dipstick + seal 81 till 83
501475 Control unit 90

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 17
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 04
Machine specifications
Technical specifications
*The diameter of the log is indicative - a small log can be difficult to split when it
has knobs or a particularly tough fibre. On the other hand, it may not be difficult
to split a log with regular fibres even if its diameter exceeds the maximum value in-
dicated above.
Product information
Fig. 1
162
3
12
16
10 9785
4
14
13
Voltage AC 230 V
Frequency 50 Hz
Input power 1500 W
IP Class IP54
Splitting force 4 tonne
Log capacity (diameter)* 50 - 250 mm
Log capacity (length) 52 cm
Hydraulic oil capacity 2.8 L
Weight 48 kg

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 05
Machine specifications
Fig. 2
1. Log pusher
2. Work table
3. Wedge
4. Lift handle
5. Support leg
6. Log retaining plates
7. Switch
8. Motor
9. Electric control box
10. Wheels
11. Hydraulic control lever
12. Control lever guard
13. Bleed screw
14. Oil drain bolt / dipstick
15. Maximum pressurelimiting screw
16. Circuit protector
Contents
1. Machine data
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
11
15
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 16
Maintenance
Faulty and/or discarded electrical or electronic machines have to
be collected at the appropriate recycling locations.

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 15
Maintenance
Troubleshooting
• Motor stops working
• Machine fails to split
logs
• The log pusher moves
jerkily, making unfa-
miliar noise or vibra-
ting a lot
• Oil is leaking around
cylinder ram or at
other points
•Motor has been over-
loaded
•Log is positioned in-
correctly
•The size or hardness of
the log exceeds the ca-
pacity of the machine
•Wedge cutting edge is
blunt
•Oil is leaking from the
machine
•Unauthorized adjust-
ment was made on
max. pressure limiting
screw
•Lack of hydraulic oil
and excessive air in the
hydraulic system
•Air sealed in hydraulic
system while opera-
ting
•Bleed screw is not
tightened beforemo-
ving the log splitter
•Oil drain bolt with dip-
stick is not tightened
•Hydraulic control val-
ve assembly and/or se-
al(s) are worn
• Allow the motor to
cool down / contact an
authorized service
centre
• Push the overload pro-
tector (Fig. 1: 16).
• See chapter 4 "Placing
the log on the splitter"
• Reduce the log size be-
fore splitting it on the
log splitter
• See chapter 5 "Sharpe-
ning the wedge"
• Locate the leak and
contact an authorized
service centre
• Contact an authorized
service centre
• Check oil level for pos-
sible oil filling
• Contact an authorized
service centre
• See chapter 3 "Bleed
screw"
• Tighten the bleed
screw
•Tighten the oil drain
bolt with dipstick
• Contact the dealer
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 06
Safety instructions
The following symbols are used in these instructions for use:
Read the instructions carefully.
Conformity with the relevant EU safety directives.
Danger of life and risk of injury as well as risk of damage to the
machine in case of non-adherence to the safety instructions in
these instructions of use.
Danger of electric shock.
Faulty and/or discarded electrical or electronic machines have to be
collected at the appropriate recycling locations.
Wear eye protection.
Wear protective gloves.
Wear safety boots.
Keep bystanders away.
Remove the plug from the mains socket.
Danger - Keep hands away from moving parts.

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 07
Safety instructions
Always pay full attention to the movement of the log pusher
Do not remove jammed logs with your hands
General safety instructions
Caution! Read all instructions. The non-observation of the instructions
mentioned below may cause an electric shock, fire and/or severe injuries. The
term “electric tool” mentioned below refers to mains-operated electric tools
(with power cord) and to rechargeable electric tools (without power cord).
Keep these instructions for use in a safe place.
1) Workplace
(a) Keep your workplace clean and tidy. Untidy and badly illuminated work
areas may lead to accidents.
(b) Do not operate this machine in potentially explosive environments
containing combustible liquids, gases or dusts. Electric tools send out
sparks which may ignite dust or vapours.
(c) Keep children and other persons away from the electric tool during use.
When distracted, you may lose control over the machine.
2) Electric safety
(a) The plug of the machine has to be suitable for the socket. The
connector may not be modified in any way.Do not use an adapter plug
together with earthed devices. Unchanged connectors and fitting
sockets reduce the risk of an electric shock.
(b) Avoid body contact to earthed surfaces, such as pipes, radiator, stoves
and refrigerators. Thereis a higher risk of an electric shock, if your body
is earthed.
(c) Keep the machine clear of rain or humidity.The penetration of water
into an electrical device increases the risk of an electric shock.
(d) Do not use the cable for unintended purposes, to carryor suspend the
machine or to pull the connector out of the socket. Keep the cable clear
of heat, oil, sharp edges or any moving parts. Damaged or entangled
cables increase the risk of an electric shock.
(e) When using an electric tool in the open, use an extension cable only
which has been approved for outdoor use. The use of an extension
cable suitable for use in the open will reduce the risk of an electric
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 14
Maintenance
•MOBIL DTE 11
•ARAL Vitam GF 22
•BP Energol HLP-HM 22
Periodically check oil level to ensure it is between the 2 grooves
around the dipstick.
Sharpening the wedge
After using the log splitter for some time, sharpen the wedge of the log splitter
using a fine-toothed file and smooth any burrs of crushed area along the cutting
edge.
Cleaning
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
Storage and transportation
Keep the machine in a well-ventilated dry room. It can be stored or transported
under ambient temperatures between -25ºC and 55ºC. Place the splitter horizon-
tal on a flat and stable surface during transportation. The wheels of the log split-
ter are suitable for minor moving only.
Faults
Should a fault occur, please contact the address on the warranty card. On the
back page of this manual you find an exploded view showing the parts that
can be ordered.
Environment
In order to prevent the machine from damage during transport, it is delivered
in a sturdy packaging. Most of the packaging materials can be recycled. Take
these materials to the appropriate recycling locations.

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 13
Maintenance
Make sure that the plug is removed from the mains when carrying out
maintenance work on the motor.
The machines have been designed to operate over a long period of time with a mi-
nimum of maintenance. Continuous satisfactory operation depends upon proper
machine care and regular cleaning.
Replacing hydraulic oil
Fig. 5 Fig. 6
Replace the hydraulic oil every 150 working hours.
•Unscrew the oil drain bolt with dipstick to remove it.
•Turn the log splitter on the support leg side and drain the oil off in a container
(fig. 5).
•Turnthe log splitter on the motor side (fig. 6).
•Refill fresh hydraulic oil (see Technical Specifications for quantity)
•Clean the dipstick and put it back into the oil tank while keeping the log split-
ter vertically.
•Clean the oil drain bolt and tighten it, to avoid leakage before placing the log
splitter horizontally.
Following hydraulic oils can be used for the hydraulic system of the log splitter:
•SHELL Tellus 22
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 08
Safety instructions
shock. Always use an RCD (redicual circuit device or circuit breaker).
(f) Hold the machine at the insulated gripping surfaces as the log splitter
may hit its own power cord. Damaging a live cable may make metal
machine parts live, which may lead to an electric shock.
3) Personal safety
(a) Please pay attention and watch what you are doing, and carry out the
work with the electric tool sensibly. Do not use the machine, when you
are tired or under the influence of drugs, alcohol or medicine. A
moment of carelessness in the use of the machine could lead to serious
injuries.
(b) Wear your safety equipment and always put on safety goggles. Wearing
personal protective gear, such as dust mask, anti-skid safety shoes, hard
hat and ear protection, depending on the type of use of the electric
tool, will reduce the risk of injury.
(c) Avoid unintentional operation. Make sure that the switch is in the
“OFF” position before you remove the plug from the socket. If you have
your finger on the switch when carrying the machine or if you connect
the running machine to the socket, this may lead to accidents.
(d) Remove the adjusting tools or the spanners before switching on the
machine. A tool or a key which is located in a revolving part of the
machine may lead to injuries.
(e) Concentrate at all times. Ensureasafe stand and keep your balance at
all times. In this case you will be able to control the machine better in
unexpected situations.
(f) Wear suitable clothing. Do not wear any loose clothing or jewellery.
Keep your hair, clothing and gloves clear of any moving parts.
(g) If dust extraction or collection devices can be mounted, make surethat
they are connected properly and are used in the proper way. The use of
these pieces of equipment reduce hazards caused by dust.
4) Careful handling and use of electric tools
(a) Use the correct tool for the job at hand.
(b) Do not use an electric tool, if the switch is defective. An electric tool,
which cannot be switched on or off, is dangerous and has to be
repaired.
(c) Remove the plug from the socket before setting down the machine,
changing accessories or putting the machine aside. This precautionary
measure prevents the unintentional start of the machine.
(d) Keep unused electric tools out of reach of children. Do not permit

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 09
Safety instructions
persons to use the machine who are not familiar with it or who have
not read these instructions. Electric tools are dangerous, if they are used
by inexperienced persons.
(e) Maintain the machine with care. Please check whether the movable
parts are perfectly operational and do not jam, whether parts have
broken or have been damaged in such a way that the function of the
machine is impaired. Have damaged parts repaired prior to using the
machine. Many accidents are caused by electric tools which are poorly
maintained.
(f) Keep all cutting tools sharp and clean.
(g) Use the electric tool, the accessories, the insert tools, etc according to
these instructions, and in the way described for this special type of
apparatus. In the process, take the working conditions and the work to
be carried out into consideration. Only use this log splitter for the
purpose for which it is intended.
(h) Use clamps or vice to hold work. It is safer then using your hands and
frees both hands to operate the tool.
5) Servicing
(a) Have your machine repaired by qualified expert staff using original
spare parts only.
(b) Caution! The use of accessories or add-on devices other than those
recommended in these instructions may mean a risk of injury.Use
original spareparts only.
Additional safety instructions
• Please check workpieces for any obstructions on the surface of the material,
such as protruding nails etc., to protect the log splitter head.
• Please keep your hands away from sharp parts.
• Immediately switch offthe tool if it starts producing any unusual noise or
starts vibrating excessively.
• Please check that all parts aresecure, tools are removed etc. before operation.
Always check that the power supply corresponds to the voltage on the
rating plate.
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 12
Operation
•Always set logs firmly on the log retaining plates (6) and a work table.
•Make sure logs will not twist, rock or slip while being split.
•Do not force the blade by splitting the log on the upper part. This will break
the blade or damage the machine.
•Break the log in the direction of the growing grain. Do not place the log across
the log splitter for splitting.
•Do not attempt to split 2 pieces of logs at the same time due to the risk of per-
sonal injury (by log being flung).
Freeing a jammed log
Fig. 4A Fig. 4B
•Release both controls.
•After the log pusher (1) moves back and completely stops at its starting positi-
on, insert a wedge wood under the jammed log.
•Start the log splitter to push the wedge wood to go completely under the jam-
med one.
•Repeat above procedure with sharper slope wedge woods until the log is
completely freed.
Do not tryto knock the jammed log off. Knocking will damage the ma-
chine or may launch the log and cause accidents.
1

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 11
Operation
Before operation: inspect hydraulic pipes and hoses and test stopping
device.
Danger! Keep clear of moving parts.
The log splitter has to be operated by one person only. Keep bystan-
ders away.
Two-hand control
Fig. 1 + 2
The log splitter has to be operated by the user with both hands:
• First push the button (7) with your right hand. Now the electromotor starts run-
ning (no load).
• Then control the hydraulic control lever (11) with your left hand.
•When pushing lever and switch, the log pusher (1) will move towards the wed-
ge (3).
•The log pusher will automatically return to start position when one hand
stops pushing the lever or switch.
•The shape and position of the wedge (3) help to clamp the log on its place.
Never force the log splitter for morethan 5 seconds by keeping pressu-
re on it to split excessively hard wood. Otherwise the hydraulic system
overheats and the machine could be damaged.
Placing the log on the splitter
Fig. 3
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PLS-52 10
Assembly
Mounting the supportleg, handle and wheels
•Place the support leg (5) under the work table as shown in figure 1.
•Connect the support leg to the work table with help of the bolts and nuts.
• Mount both wheels (2) onto the shaft (1) using the supplied washer (3)
en locking nut (4)
Bleed screw
Fig. 1
•When the log splitter is not being used, it should be tightened to avoid leakage
of oil.
• Beforeoperating the log splitter,the bleed screw should be loosened by rota-
ting until air can go in and out the oil tank smoothly.
Failureto loosen the bleed screw will keep the sealed air in the hydrau-
lic system being compressed after being decompressed. This can cause
permanent damage to the hydraulic system of the log splitter.
Maximum pressurelimiting screw
Fig. 2
The pressureof the hydraulic system is adjusted in the factoryby qualified mecha-
nics on 4 tonnes maximum. The maximum pressure limiting screw (15) is sealed
with glue.
Do not adjust the maximum pressure limiting screw. Unauthorised re-
setting can cause serious injury or damage to the machine.