PowerBoss T82 User manual

Commander T Series PB# 4100032 Rev.B 09/11
PowerBoss, Inc. Copyright 2011
Page 1
User Manual
Commander T Series
Models: T82, T82 Europe, T90,
Gasoline, LP & Diesel
PowerBoss, Inc.
A Member Of The Hako Group
PB# 4100032 Rev. C 03/12

PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032 Rev. C 03/12
Page 2
PREFACE
Thank you for your purchase of the now industry standard for sweepers. PowerBoss takes great pride in offering the most
dependable, reliable and best value in industrial power sweepers and sweeper / scrubbers. We set the standard.
Our Publishing Department would like to hear from you. If you see any errors, omissions or something that needs
clarication in this User Manual please let us know. We are working hard toward perfection in our corner of the process to
bring you the best you can buy. Please copy the form below, ll out and comment on how you found our catalog.
Thank you.
*Name______________________________________________________________________
*Title: ______________________________________________________________________
*Company Name: _____________________________________________________________
*Address: ____________________________________________________________________
*Country: ____________________________________________________________________
Type of equipment or model number: ______________________________________________
PREFACE

Commander T Series PB# 4100032 Rev. C 03/12
PowerBoss, Inc. Copyright 2011
Page 3
Comments:
*Information is optional.
Please return to:
Manager, Publishing Department, International
PowerBoss, Inc.
175 Anderson Street
Aberdeen, North Carolina 28315 USA
Phone [phone] Toll Free
[phone] Local
E-Mail - [email protected]
PREFACE

PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032 Rev. C 03/12
Page 4
This is the User Manual for the PowerBoss Commander T Series Sweeper Scrubber.
This manual covers all Standard Commander T Series machine variations beginning May 2009.
We believe this machine will provide excellent service for many years.
However, the best results will be obtained if:
• The machine is operated with reasonable care.
• The machine is maintained regularly per the maintenance schedule provided in the User Manual.
• The machine is maintained with PowerBoss Inc. supplied or equivalent parts.
All right side and left side references to the machine (except for engine) are determined by facing the direction of forward
travel. The front of the engine or engine fan faces the rear of the machine. Some hardware considered to be common or
locally available has been omitted from the parts section to make this manual clear. Be sure to use equivalent hardware
when replacement becomes necessary.
The Model and Serial Number of your machine is shown on the I.D. name plate. This information is needed when
contacting Technical Support or when ordering parts. The I.D. plate is mounted on the console of the machine left of the
operator and adjacent the main broom adjustment access door.
Parts may be ordered by phone,fax or e-mail from any PowerBoss parts and service center. Before ordering parts or
supplies, be sure to have your machine model number and serial number handy. For your convenience Fill out the data
block below for future reference.
PREFACE

Commander T Series PB# 4100032 Rev. C 03/12
PowerBoss, Inc. Copyright 2011
Page 5
Example I.D Plate;
MACHINE DATA
Fill out at installation
Serial Number: ___________________________________
Engine Serial Number: ____________________________
Sales Rep.: ______________________________________
Date of Install: ___________________________________
All information contained in this catalog is current at the time of printing However, PowerBoss reserves the right to make
changes at any time without notice.
©2011, PowerBoss, Inc., Printed in USA
PREFACE

PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032 Rev. C 03/12
Page 6
TECHNICAL SPECIFICATIONS
Model Commander T Series
Model No. TSS90DSL / TSS90DSLBR / TSS90LP / TSS90LPBR / 3333780 / 3333780BR / TSS82DSL /
TSS82LP / TSS82GAS / TSS82DSLCE / TSS82LPCE
DIMENSIONS & WEIGHT
T82 & T82 Europe T90
Length . . . . . . . . . . . . . . . . . . . 120.5 inches (306 cm) .123 inch (312 cm)
Width . . . . . . . . . . . . . . . . . . . . 56 inch (142 cm) . . . . . .62 inch (158 cm)
Height . . . . . . . . . . . . . . . . . . . 57 inch (145 cm) . . . . . .63 inch (160 cm)
Height w/ overhead guard . . . 87 inch (221 cm) . . . . . .87 inch (221 cm)
Height w/ cab. . . . . . . . . . . . . . 83.5 inch (212 cm) . . . .83.5 inch (212 cm)
Weight . . . . . . . . . . . . . . . . . . 2900 lbs (1315 kg). . . . .3400 lbs (1542 kg)
Minimum U-turn. . . . . . . . . . . . 120 inch (305 cm) . . . . .126 inch (320 cm)
SCRUBBING SYSTEM
Scrub path . . . . . . . . . . . . . . . . 42 inch (107 cm) . . . . . .48 inch (122 cm)
Scrub deck pressure . . . . . . . . 300 lbs (136 kg) . . . . . .300 lbs (136 kg)
Brush speed . . . . . . . . . . . . . . 250 rpm . . . . . . . . . . . . .250 rpm
Solution tank capacity . . . . . . . 68 gal (257 L) . . . . . . . .100 gal (378.5 L)
Recovery tank capacity . . . . . . 65 gal (246 L) . . . . . . . .100 gal (378.5 L)
Squeegee width. . . . . . . . . . . . 50 inch (127 cm) . . . . . .50 inch (127 cm)
TECHNICAL SPECIFICATIONS
SWEEPING SYSTEM
T82 & T82 Europe T90
Sweep path . . . . . . . . . . . . . . . 54 inch (137 cm) . . . . . .60 inch (152 cm)
Main broom . . . . . . . . . . . . . . . 42 inch (107 cm) . . . . . .48 inch (122 cm)
Side broom . . . . . . . . . . . . . . . 24 inch (61 cm) . . . . . . .24 inch (61 cm)
Hopper type. . . . . . . . . . . . . . . high dump . . . . . . . . . . .high dump
Hopper volume . . . . . . . . . . . . 14 cu ft . . . . . . . . . . . . .16 cu ft
Hopper load capacity. . . . . . . . 1000 lbs (454 kg) . . . . .1200 lbs (544 kg)
Dust control . . . . . . . . . . . . . . . 100 sq ft . . . . . . . . . . . .100 sq ft
High dump . . . . . . . . . . . . . . . 60 inch (152 cm) . . . . . .60 inch (152 cm)
RTR (rotary trash relocation). . yes . . . . . . . . . . . . . . . .yes
OTHER SPECIFICATIONS
T82 & T82 Europe T90
Noise Level . . . . . . . . . . . . . . . 84.5 dBA . . . . . . . . . . . .84.5 dBA

Commander T Series PB# 4100032 Rev. C 03/12
PowerBoss, Inc. Copyright 2011
Page 7
TECHNICAL SPECIFICATIONS

PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032 Rev. C 03/12
Page 8
CE DECLARATION OF CONFORMITY
COMMANDER T82
DECLARATION OF CONFORMITY

Commander T Series PB# 4100032 Rev. C 03/12
PowerBoss, Inc. Copyright 2011
Page 9
DECLARATION OF CONFORMITY

PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032 Rev. C 03/12
Page 10
TABLE OF CONTENTS
PREFACE .............................. 2
TECHNICAL SPECIFICATIONS. . . . . . . . . . . . . 6
DIMENSIONS & WEIGHT ........................6
SCRUBBING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . 6
CE DECLARATION OF CONFORMITY . . . . . . . 8
COMMANDER T82 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
AIR-MOVING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . 15
ERGONOMICS SYSTEM ........................ 15
DEBRIS-HANDLING SYSTEM .................... 15
DRIVE-TRAIN SYSTEM ......................... 15
CHASSIS SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
ENVIRONMENTAL FRIENDLY FEATURES . . . . . . . . . . 16
WATER CONSERVATION .................... 16
CLEAN AIR ................................ 16
LOWER EMISSIONS. . . . . . . . . . . . . . . . . . . . . . . . . 16
SAFER WORK ENVIRONMENT ................ 16
CLEAN ENERGY ............................ 16
CLEAN ENERGY ............................ 16
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . 17
IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . 17
FOR SAFETY DURING OPERATION. . . . . . . . . . . . . . . 17
FOR SAFETY WHEN SERVICING OR MAINTAINING
MACHINE ....................................18
SAFETY SYMBOLS ............................18
SAFETY DECALS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
BASIC POWERBOSS® SAFETY. . . . . . . . . . . . 22
MACHINE OPERATION ................... 25
BASIC OPERATING CONTROLS AND INDICATORS 25
IGNITION SWITCH .......................... 25
HORN ....................................25
LIGHT SWITCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
HOUR METER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ENGINE COOLANT TEMPERATURE GAUGE . . . . . 25
ENGINE OIL PRESSURE ..................... 25
VOLTMETER AMP GAUGE ....................25
FUEL LEVEL GAUGE ........................ 25
THROTTLE (DIESEL) ........................ 26
GLOW PLUG BUTTON (DIESEL ONLY). . . . . . . . . . 26
TABLE OF CONTENTS

Commander T Series PB# 4100032 Rev. C 03/12
PowerBoss, Inc. Copyright 2011
Page 11
MURPHY SWITCH (DIESEL ONLY) . . . . . . . . . . . . . 26
SEAT ADJUSTMENT. . . . . . . . . . . . . . . . . . . . . . . . . 26
PARKING BRAKE ........................... 26
BRAKE ....................................26
THROTTLE (GAS AND LP) .................... 28
CHECK ENGINE INDICATOR (GAS AND LP ONLY) 28
SWEEPING / SCRUBBING CONTROLS AND
INDICATORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
BROOM CONTROL LEVER . . . . . . . . . . . . . . . . . . . 30
MAIN BROOM HANDLE ...................... 30
SIDE BROOM HANDLE ...................... 30
SCRUB HEAD SWITCH ...................... 32
SCRUB DECK GAUGE . . . . . . . . . . . . . . . . . . . . . . . 32
IMPELLER LEVER .......................... 32
IMPELLER STOP CONTROL .................. 32
SQUEEGEE SWITCH ........................ 32
SOLUTION LEVER .......................... 32
SOLUTION TANK EMPTY INDICATOR. . . . . . . . . . . 32
RECOVERY TANK FULL INDICATOR ............ 32
DEBRIS HOPPER DUMP CONTROLS .............34
HIGH DUMP ............................... 34
Lever 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Lever 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
HOPPER UNLOCK BUTTON ..................34
ROTARY TRASH RELOCATOR (RTR™) ......... 34
HOPPER FILTER SHAKER BUTTON ............ 34
FIRE IN THE HOPPER INDICATOR (OPTIONAL) 34
CLOGGED FILTER INDICATOR (OPTIONAL) . . . . . 35
OPERATING PROCEDURES . . . . . . . . . . . . . . . . . . . . . 36
PRE-OPERATION CHECKS . . . . . . . . . . . . . . . . . . . 36
STARTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Gasoline or LP Power Units . . . . . . . . . . . . . . . . . 36
Diesel Power Units ........................ 37
TRAVELING FORWARD OR BACKWARDS. . . . . . . 37
Forward ................................37
Reverse ................................ 37
SLOWING AND STOPPING ................... 37
SWEEPING ................................ 38
EMPTYING THE HOPPER WITH HIGH DUMP
FEATURE .................................38
TABLE OF CONTENTS

PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032 Rev. C 03/12
Page 12
USING THE ROTARY TRASH RELOCATOR
(RTR™) ................................... 40
TO SHAKE THE FILTER ...................... 41
FIRE IN THE HOPPER ....................... 41
SCRUBBING ............................... 42
Operating the Scrub Brushes ................ 42
Starting Solution Flow . . . . . . . . . . . . . . . . . . 42
Lower The Squeegee . . . . . . . . . . . . . . . . . . . 42
FILLING THE SOLUTION TANK ................ 43
DRAINING THE RECOVERY TANK ............. 44
CLEANING THE RECOVERY TANK . . . . . . . . . . . . . 44
SQUEEGEE WAND (OPTION) .................45
BLOWER (OPTION) ......................... 46
TRANSPORTING THE MACHINE. . . . . . . . . . . . . . . 46
Using a Trailer or Transport Vehicle . . . . . . . . . . . 46
Pushing the Machine ...................... 46
PREVENTATIVE MAINTENANCE . . . . . . . . . . . 47
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
SCHEDULED MAINTENANCE CHART . . . . . . . . . . . . . 48
PREVENTATIVE MAINTENANCE INSTRUCTIONS 52
ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Air Intake System . . . . . . . . . . . . . . . . . . . . . . . . . 52
Check Air Filter Service Indicator . . . . . . . . . . 52
Air Filter Element Removal. . . . . . . . . . . . . . . 53
Air Filter Cleaning. . . . . . . . . . . . . . . . . . . . . . 54
Air Filter Inspection. . . . . . . . . . . . . . . . . . . . . 54
Air Filter Installation .................... 54
ELECTRICAL SYSTEM ...................... 55
Battery Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . 55
Battery Replacement ...................... 55
Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
FUEL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
TABLE OF CONTENTS

Commander T Series PB# 4100032 Rev. C 03/12
PowerBoss, Inc. Copyright 2011
Page 13
COOLANT SYSTEM. . . . . . . . . . . . . . . . . . . . . . . . . 58
Blowing Out Radiator Fins . . . . . . . . . . . . . . . . . . 58
Reverse Flow Flushing. . . . . . . . . . . . . . . . . . . . . 58
LUBRICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Changing Engine Oil ...................... 59
LUBRICATION POINTS ...................... 59
Steering Fork Assembly and Steering Link
Ball Joints. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Steering Cylinder ......................... 60
Latches & Hinges . . . . . . . . . . . . . . . . . . . . . . . . . 60
Hopper Lift Arm Mounts ....................60
HYDRAULICS SYSTEM . . . . . . . . . . . . . . . . . . . . . . 62
Filling The Fluid Reservoir ..................62
Hydraulic Fluid Viscosity Specications . . . . . 62
Maintaining Hydraulic Oil Cooler Efciency . . . . . 62
Changing The Hydraulic Fluid ............... 62
Changing The Hydraulic Fluid Filter. . . . . . . . . . . 63
SWEEP COMPONENTS . . . . . . . . . . . . . . . . . . . . . . 64
Broom Door Flap Inspection ................64
Broom Door Flap Replacement and Adjustment 64
Main Broom Pattern Check ................. 65
Main Broom Height Adjustment .............. 66
Main Broom Taper Adjustment . . . . . . . . . . . . . . . 67
Main Broom Replacement .................. 68
Side Broom Angle Adjustment ............... 69
Side Broom Height (Wear) Adjustment ........ 70
Side Broom Lift Cable Adjustment .........71
Side Broom Replacement . . . . . . . . . . . . . . . . . . 71
SCRUB & WATER PICK-UP COMPONENTS . . . . . . 72
Scrub Brush Replacement . . . . . . . . . . . . . . . . . . 72
Scrubhead Gauge Adjustment . . . . . . . . . . . . . . . 72
Scrubhead Adjustment . . . . . . . . . . . . . . . . . . . . . 73
TABLE OF CONTENTS

PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032 Rev. C 03/12
Page 14
MAIN SQUEEGEE COMPONENTS . . . . . . . . . . . . . 75
CHECKING and Adjusting the Rear Main
Squeegee Flare .......................... 75
Turning or Replacing the Rear Squeegee Blade 76
Main Squeegee Tool Removal . . . . . . . . . . . . . . . 77
Main Squeegee Tool Installation .............77
Inner Squeegee Replacement . . . . . . . . . . . . . . . 77
Auto Squeegee Lift Mechanism . . . . . . . . . . . . . . 77
HOPPER .................................. 78
Hopper Filter Removal . . . . . . . . . . . . . . . . . . . . . 78
Hopper Filter Cleaning . . . . . . . . . . . . . . . . . . . . . 79
Hopper Filter Replacement ................. 79
Flap Replacement ........................ 80
Frame Seal Replacement ..................80
Front Frame Seal ......................80
Side Frame Seal. . . . . . . . . . . . . . . . . . . . . . . 80
Floor Clearance .......................... 81
Vacuum Gasket Mount Adjustment ...........82
PARKING BRAKE ........................... 82
Adjusting The Parking Brake Cable Length . . . . . 83
Cable Adjustment for Standard brake ......... 83
CHANGING SOLID TIRES .................... 84
Front Tire ............................... 84
Rear Tire ...............................84
MISCELLANEOUS ADJUSTMENTS . . . . . . . . . . . . . 84
Anti-Static Chain Adjustment ................ 84
Latch and Hinge Maintenance . . . . . . . . . . . . . . . 84
Cables .................................84
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . 85
TROUBLESHOOTING CHART . . . . . . . . . . . . . . . . . . . . 85
TABLE OF CONTENTS

Commander T Series PB# 4100032 Rev. C 03/12
PowerBoss, Inc. Copyright 2011
Page 15
FEATURES
AIR-MOVING SYSTEM
• Dual-phase dust ltration
• Built-in pre-ltering & ultra-ne screen panel lters for
dust control
• Aggressive electric lter shakers
• Shock-mounted hydraulic impeller
• Engine area shielded from exhaust air
• Dust Control Filter: 100 Sq. Ft. total
• Timed Electric Filter Shakers
• Clogged Filter Indicator
• Fire-in-hopper Indicator
ERGONOMICS SYSTEM
• Roomy, open cockpit with extra comfort
• Adjustable, high-back seat with arm rests
• Power steering
• Comfortable pedal/controls placement
• Full instrumentation for all functions
DEBRIS-HANDLING SYSTEM
• Direct throw sweeping method
• Oversized hopper with RTR®
• Quick-change, oating 48” main broom & retractable
side brooms
• Dual-performance sweep mode
• Multi-Level Hopper Dumping
DRIVE-TRAIN SYSTEM
• Industrial liquid-cooled engine
• Heavy-duty radiator & Tri-phase air cleaner
• Hydraulics protection package
• 4-Core Radiator
• Industrial smooth ride tires for traction and reliability
CHASSIS SYSTEM
• Massive One-Piece, unitized steel frame
FEATURES

PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032 Rev. C 03/12
Page 16
FEATURES
ENVIRONMENTAL FRIENDLY FEATURES
WATER CONSERVATION
Aqua-Stop saves water usage by 50%, water is released
through a pump system providing greater control of water
usage than gravity systems
CLEAN AIR
High-performance lter system dramatically reduces the
release of dust and debris back into the air, dust vacuum
ensures that dust is put directly into the hopper, bristle
pattern on main broom increases dust control.
LOWER EMISSIONS
All gas and LP engines meet Tier 2 specications, catalyst
mufers, battery operated available, diesel operated
available, bio-diesel fuel can be used in Kubota engine
SAFER WORK ENVIRONMENT
Orange machines are highly visible to others in the
workplace, simple controls reduce operator error, one-
button scrub, horn, re in hopper indicator, effective braking
system, “belly bar” prevents operator from being pinned
behind machine when in reverse, parabolic squeegee picks
up all water leaving the scrub path virtually dry for trafc,
seat equipped with safety shut-off switch, also available:
overhead guard, back-up alarm, warning beacon
CLEAN ENERGY
Bio-diesel fuel can be used in Kubota engines
CLEAN ENERGY
Aqua-Stop saves chemical usage by 50%, pump system
for water and chemical release allows for better control of
chemical usage, chemical metering system is available
as an option and regulates chemical usage to the correct
dose.

Commander T Series PB# 4100032 Rev. C 03/12
PowerBoss, Inc. Copyright 2011
Page 17
SAFETY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
Operators must read and understand this manual before
operating or maintaining this machine.
Do not operate this machine in ammable or explosive
areas.
This machine is designed solely for removing dirt,
dust and debris in an outdoor or indoor environment.
PowerBoss does not recommend using this machine in
any other capacity.
The following information below may cause a potential
hazard to the operator and equipment. Read this manual
carefully and be aware when these conditions can
exist. Take necessary steps to locate all safety devices
on the machine and train the personnel operating the
machine. Report any machine damage or faulty operation
immediately. Do not use machine if it is not in proper
operating condition.
FOR SAFETY DURING OPERATION
Keep hands and feet clear of moving parts while machine is in
operation.
Make sure all safety devices are in place and operate properly.
All covers, doors and latches must be closed and fastened before
use.
During operation, attention should be paid to other persons in the
work area and especially if small children are present.
Components can cause an explosion when operated near
explosive materials or vapor. Do not operate this machine near
ammable materials such as solvents, thinners, fuels, grain dust,
etc.
Store or park this machine on a level surface only. To prevent
unauthorized use, machine should be stored or parked with the
key removed.
This machine is designed for level operation only. Do not operate
on ramps or inclines greater than 2%.
This machine is not suitable for picking up hazardous dusts.
Use caution when moving this machine into areas that are below
freezing temperatures.
SAFETY INFORMATION

PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032 Rev. C 03/12
Page 18
FOR SAFETY WHEN SERVICING OR
MAINTAINING MACHINE
Stop on level surface.
Disconnect the power to the machine when servicing.
Avoid moving parts. Do not wear loose jackets, shirts, or
sleeves when working on machine.
Avoid contact with battery acid. Battery acid can cause
burns. When working on or around batteries, wear
protective clothing and safety glasses. Remove metal
jewelry. Do not lay tools or metal objects on top of battery.
Authorized personnel must perform repairs and
maintenance. Use PowerBoss supplied replacement parts.
SAFETY SYMBOLS
Five symbols are used throughout this manual to
emphasize various levels of safety information. These
symbols and the meaning of each are listed below.
DANGER
To warn of immediate hazards which will result in
severe personal injury or death
WARNING
To warn of hazards or unsafe practices which
could result in severe personal injury or death.
CAUTION
To warn of hazards or unsafe practices which
could result in minor personal injury.
ATTENTION!
To warn of practices which could result in
extensive equipment damage.
NOTE: To direct your attention to important
equipment information or special
instructions for preventing damage to
equipment
SAFETY INFORMATION

Commander T Series PB# 4100032 Rev. C 03/12
PowerBoss, Inc. Copyright 2011
Page 19
Symbols at the top of the list are the strongest warnings.
However, all symbols represent important information
which should be observed to protect you and others from
harm and injury, and to prevent damage to the equipment.
SAFETY DECALS
Decals directly attached to various parts of the unit are
highly visible safety reminders which should be read
and observed. Make sure the decals are replaced if they
become illegible or damaged.
Located in the drive compartment:
Part Number 301854
SAFETY INFORMATION

PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032 Rev. C 03/12
Page 20
Located at the Impeller:
Part Number 301729
Located on the Secondary Lift Arm:
Part Number 301732
Located on the shroud of the radiator:
Part Number 301733
SAFETY INFORMATION