PowerTech MB3802 User manual

10000mAh
USB Portable Power Bank
MB3802
User Manual

Product Characteristics & Specication Parameters
• 10,000mAh capacity with Lithium Polymer battery inside.
• Automatic shut off when not in use to conserve power.
• Intelligent protection circuit, overcharge protection, over
discharge protection, short circuit protection.
• Aluminium metal shell rubberised case - sleek design with
ergonomic grip
Power Check
• Press the power button to display the current capacity status.
• Automatic hibernation mode after 45s in inused state.
Product Details
Box Contents
1 X 10000 mAh Portable Power Bank
1 X USB-C to USB-A Data Charging Cable
1 X Micro-B to USB-A Data Charging Cable
I X User Manual
USB-A Fast
Charge Output
Micro USB
Input
USB-C
Input / Output
USB-A
Std Output
Power Button
LED Indicators
Model No. MB3802
Capacity 10,000mAh
Total Power 15W Max.
Input 1 5VDC, 2A (Micro)
Input 2 5VDC, 3A (Type-C)
Output 1 5VDC, 2.4A
Output 2 5VDC, 2.4A (Smart IC)
Output 3 5VDC, 3A (Type-C)
Charging Time < 6 Hours
Dimensions 133 × 68 × 14
Product Weight 210g
Operating Temp. -10°C - +45°C

Instructions
Charging your power bank
1. Charge your power bank through USB-C input or Micro USB
input connected with USB charging source (Type-A or Type-C)
Charging mobile phones and digital devices
1. Charge mobile phones with USB-C ports preferably via the
USB-C port.
2.Charge mobile phones with Micro-B, Lightning, or other ports via
USB-A 2.4A fast charge port 1 or 2.
3. Charge devices simultaneously.
4. Once mobile device is connected to the power bank, phone
begins charging.
5. When mobile device is fully charaged, disconnect it from the
power bank.
Note:
Please check the voltage accepted by the charging device
carefully before charging a mobile phone or digital equipment.
If the power bank specications do not suit the charging device
and you proceed to charge the device anyway, it may damage
the power bank and the charging device without battery circuit
protection board.
1. When charging this product, please use USB charger or
computer USB port with output voltage of 5V.
2. Before use, please check the device to be charged is
compatible with the voltage of the power bank.
3. During use, charging or storage, if any of the following should
occur stop using the power bank immediately and contact the
retailer: abnormal smell, colour or shape changes, excessive
heat (the temperature can be slightly higher when used
frequently but should not be too hot to hold) or any other
abnormal conditions.
4. Before rst use, charge the power bank completely to full.
Ensure to charge the power bank at least once a month if not in
use for long periods.
5. When charging mobile phones and digital devices, ensure that
the device being charged displays the charging status to conrm
the power bank is working correctly.
6. Incorrect use of the power bank and self consumption of this
product may lead to decreased service life of the power bank.
This is not a warrantable issue, please be noted.

Maintenance
Troubleshooting
Maintenance
1. Do not put power bank in water, re, excessivly high ( > +45°C)
or excessively low ( <-10°C) temperatures.
2. Keep away from children
3. Do not disassemble or ret the power bank to avoid damaging
the protection device of the power bank and causing batter to
overheat, catch re or explode.
4. Do not throw, puncture or otherwise mishandle the power bank.
This can cause product defects, perforation, cracking, doformity
and corrosion. If the power bank is damaged please stop using
it immediately
5. Clean the power bank surface with a soft dry cloth. Do not use
chemicals, soap or detergents.
6. If the power bank is not going to be in use for a long time, it is
best to store it at 50% capacity. Storage at full capacity reduces
the life of the internal battery. Storage at nil capacity results in
over discharge.
Problem Possible reason
Power bank
does not
charge
1.Incorrect connection.
2.Charging cable is loose.
3.Charging cable is damaged.
Power bank
does not
charge
other devices
1.Incorrect connection.
2.Charging cable is loose.
3.Charging cable or adapter is damaged
4.Voltage is to low. Recharge power bank.
5.Power bank is not functioning. Contact
dealer/place of sale
Distributed by:
TechBrands by Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
Ph: 1300 738 555
Int’l: [phone]
Fax: [phone]
www.techbrands.com
Made in China