PQI Card Drive U510 Pro User manual

USB Flash Drive
Rev. A.2 Sep 2006
Card Drive U510 Soccer
Card Drive U510 Pro
Card Drive U510
BB58 Series

USB Flash Drive
Rev. A.2 Sep 2006
Table of Contents
1. Introduction to Card Drive ........................................................................................................ 1
2. Main Features Overview ………..……….....................……...…...……………………………...… 1
3. Hardware Specification ………………………………………….………….……………………..… 1
3.1 USB Interface ………………………..…………………..…….........…………...….......……….…… 1
3.2 NAND Flash Interface …………………………………………….........…..…...…..……….......……. 1
3.3 OS Support ……………………………………………………….......……..…...……….….......…… 1
3.4 Product Capacity ………………………………………………..……......………...……….......……. 1
4. Block Diagram ........................................................................................................................... 2
5. Absolute Maximum Ratings ..................................................................................................... 2
6. DC Characteristics .................................................................................................................... 3
7. Recommended Operating Conditions ......................................................................................4
8. Pin Assignments ....................................................................................................................... 4
9. Physical Specifications ............................................................................................................. 5

USB Flash Drive
Rev. A.2 Sep 2006
Revision History
Revision Date History Remark
A.0 05/03 ‘06 New Creation
A.1 09/04 ‘06 Hardware Specification Modify
A.2 09/28 ‘06 Main Features Overview Modify
Important!! Please make sure the driver matches the part number on your pen drive before you download.
Software AP System Requirements. One of following operation systems: Windows 98/98SE/Windows ME/Windows 2000/Windows XP
The advertised memory capacity of this device represents unformatted capacity. Please note that once formatted and due to variations in flash
module block limitations, the functional storage space will be lower than the advertised capacity.
“PQI reserves the right to make changes without notification when fit, form, function, quality and reliability are not affected. The data sheets do
not constitute contract documents and should not be considered part of the specification for purposes of any warranty.”

USB Flash Drive
Rev. A.2 1/5 Sep 2006
1. Introduction to Card Drive
The latest PQI portable storage device is available with a whopping 16GB capacity and measures only 3mm thin.
Image a credit card size device that requires no external power to function and stores any type of data you put to it.
Sporting all the functions of a USB (2.0/1.1) compatible device, functional on Windows or Mac OS, it definitely packs
more value into your wallet.
2. Main Features Overview
♦Ultra transfer rate: Read up to 25MB/sec (U510 PRO only)
♦3mm Thin
♦Retraction Connector
♦Aluminum Alloy Casing
♦PQI’s patented Intelligent StickTM interface
♦Multimedia or Data Storage
♦Mobile USB flash drive, USB 2.0 compatible
♦Hot swappable, USB Plug & Play compatible
♦LED indicator with two model: Busy, waiting
♦Low power consumption
♦Its small size marking it easy to carry and store
♦Built-in personal customizable software (USB Notebook Professional)
3. Hardware Specification
USB Interface High-speed USB 2.0 interface; backward compatible with USB 1.1
NAND Flash Interface Integrated ECC circuits for 4-bit error correction
OS Support No drive is required for Windows ME, 2000,XP or Mac OS 9.x
Environment
Operating 0℃to 65℃
Temperature Non-Operating -20℃to 75℃
Operating 0.2G
Vibration Non-Operating 15G
Operating 150G
Shock resistant Non-Operating 1000G
Configuration
Capacity 1GBytes ~ 4GBytes (U510 Soccer only) 4GBytes ~ 16GBytes (U510 Pro)
1GBytes ~ 16GBytes (U510)
Reliability
MTBF(@25℃) 1,000,000 hours
Power Requirement
Voltage DC 3.3/5V ± 10%
Power Consumption
Read <100mA
Write <100mA
Standby <100mA
Un-configuration <100mA
Suspend <1.0.mA

USB Flash Drive
Rev. A.2 2/5 Sep 2006
4. Block Diagram
5. Absolute Maximum Ratings
Symbol Parameter Min Max Unit
Tstorage Storage Temperature -20 75 ℃
Ta Ambient Operating Temperature 0 65 ℃
Vcc3 3.3V Supply Voltage -0.3 3.6 V
Vcc18 1.8V Supply Voltage -0.3 2 V
Vin3.3 3.3V Buffer Input Voltage -0.3 3.6 V
Vin3/5 3.3V/5V Buffer Input Voltage -0.3 5 V
Vin1.8 1.8V Buffer Input Voltage -0.3 2 V
8051 Micro
Controller
Data /
Address
Bus
USB 2.0
Interface
USB2.0
USB1.1
Host
PLL, REG
Program ROM
Program RAM
DMA Flash
Control
Logic
EDC/
ECC
DATA RAM
CLK
PWR_GOOD
PWR_RST
Flash
Memory
USB2.0 or
1.1 Port

USB Flash Drive
Rev. A.2 3/5 Sep 2006
6. DC Characteristics
Symbol Parameter Min. Max. Unit Notes
VIH_TTL TTL Input High Voltage 2 Vcc3+0.3 V
VIL_TTL TTL Input Low Voltage -0.3 0.8 V
VOH_TTL TTL Output High Voltage 0.9 X Vcc3 V
VOL_TTL TTL Output Low Voltage 0.45 V
IOH_TTL TTL Output High Current -4 mA
IOL_TTL TTL Output Low Current 4 mA
VIH_USB USB Input High Voltage for
Low-/full-speed 2.0 V
VIL_USB USB Input Low Voltage for
Low-/full-speed 0.8 V
VI_USB_DIFF Differential Input Sensitivity for
Low-/full-speed TBD V
VI_USB_CM Differential Common Mode Input
Range for Low-/full-speed 0.8 2.5 V
VI_USB_HSSQ USB High-speed squelch Input
detection threshold 0.10 0.15 V
VI_USB_HSDSC USB High-speed disconnect
Input detection threshold 0.525 0.625 V
VI_USB_HSCM USB High-speed Signaling
Common Mode Range -0.05 0.5 V
VOH_USB USB Output High Voltage for
Low-/full-speed 2.8 3.6 V
VOL_USB USB Output Low Voltage for
Low-/full-speed 0 0.3 V
VOH_USB_HS USB Output High Voltage for
High-speed 0.36 0.44 V
VOL_USB_HS USB Output Low Voltage for
High-speed -0.01 0.01 V
IOH_USB USB Output High Current for
Low-/full-speed -10 mA
IOL_USB USB Output Low Current for
Low-/full-speed 10 mA
IOH_USB_HS USB Output High Current for
High-speed -40 mA
IOL_USB_HS USB Output Low Current for
High-speed 40 mA

USB Flash Drive
Rev. A.2 4/5 Sep 2006
7. Recommended Operating Conditions
Symbol Parameter Min. Typical Max. Units
Vcc33 Power Supply Voltage 3.0 3.3 3.3 V
Vin Input Voltage 0 Vcc Vcc+0.3 V
Vcc25 Internal Power Support 2.25 2.5 2.75 V
8. Pin Assignments
Pin No. Pin Name Function
1 VCC USB power input
2 USB D- USB differential signal
3 USB D+ The pairs are used to transmit Data/Address/Command
4 VSS Ground

USB Flash Drive
Rev. A.2 5/5 Sep 2006
9. Physical Specifications
9.1 Dimensions:
9.1.1 Height: 85.0mm
9.1.2 Width: 54.0mm
9.1.3 Depth: 3.0mm
9.1.4 Weight: 22.8g ± 2g
9.2 Outline of top view