PQI Intelligent Stick 2.0 Plus User manual

Intelligent Stick™
Rev. A.0 Sep 2006
Intelligent StickTM 2.0 Plus
BD03 Series

Intelligent Stick™
Rev. A.0 Sep 2006
Table of Contents
1. Introduction to Intelligent StickTM 2.0 Plus............................................................................... 1
2. Main Features Overview ………..……….....................……...…...……………………………...… 1
3. Hardware Specification ………………………………………….………….……………………..… 1
3.1 USB Interface ………………………….…..…………………..….........……………...……………… 1
3.2 NAND Flash Interface …………………………………………….……......……..…...………………. 1
3.3 OS Support ………………………………………………........…….......………..…...……………… 1
3.4 Product Capacity ……………………………………………………....….......………...……………. 1
4. Block Diagram ........................................................................................................................... 2
5. Absolute Maximum Ratings ..................................................................................................... 2
6. DC Characteristics .................................................................................................................... 3
7. Recommended Operating Conditions ..................................................................................... 3
8. Pin Assignments ....................................................................................................................... 3
9. Physical Specifications ............................................................................................................. 4

Intelligent Stick™
Rev. A.0 Sep 2006
Revision History
Revision Date History Remark
A.0 09/08 ‘06 New Creation
yImportant!! Please make sure the driver matches the part number on your pen drive before you download.
ySoftware AP System Requirements. One of following operation systems: Windows 98/98SE/Windows ME/Windows 2000/Windows XP
yThe advertised memory capacity of this device represents unformatted capacity. Please note that once formatted and due to variations in
flash module block limitations, the functional storage space will be lower than the advertised capacity.
y“PQI reserves the right to make changes without notification when fit, form, function, quality and reliability are not affected. The data sheets do
not constitute contract documents and should not be considered part of the specification for purposes of any warranty.”

Intelligent Stick™
Rev. A.0 1/4 Sep 2006
1. Introduction to Intelligent StickTM 2.0 Plus
The Intelligent Stick Pro 2.0 Plus is a PQI patented technology. It combines characteristics of a flash card and a USB
flash drive. It does not need a card reader to read from or write to thus making it the perfect storage medium for all
types of digital devices. PQI's Intelligent Stick consumes minimum power and its minute dimensions makes it easy to
store. For added value, it also comes with password security, partitioning software and USB boot applications.
2. Main Features Overview
1. PQI’s patented Intelligent Stick™ interface USB 2.0 compatible
2. Multimedia or Data Storage
3. Hot swappable, USB Plug & Play compatible
4. Low power consumption
5. Its small size marking it easy to carry and store
6. Bundled software downloadable from PQI website : security and partition software
7. Carrying caddy for easy storage in your wallet
3. Hardware Specifications
USB Interface High-speed USB 2.0 interface; backward compatible with USB 1.1
NAND Flash Interface Integrated ECC circuits for 4-bit error correction
OS Support No drive is required for Windows ME, 2000, XP or Mac OS 9.x
Environment
Operating 0℃to 65℃
Temperature Non-Operating -20℃to 75℃
Operating 0.2G
Vibration Non-Operating 15G
Operating 150G
Shock resistant Non-Operating 1000G
Configuration
Capacity 128MBytes ~ 2GBytes
Reliability
MTBF(@25℃) 1,000,000 hours
Power Requirement
Voltage DC 3.3/5V ± 10%
Power Consumption
Read <100mA
Write <100mA
Standby <75mA
Un-configuration <75mA
Suspend <0.5mA

Intelligent Stick™
Rev. A.0 2/4 Sep 2006
4. Block Diagram
5. Absolute Maximum Ratings
Symbol Parameter Min Max Unit
Tstorage Storage Temperature -20 75 ℃
Ta Ambient Operating Temperature 0 65 ℃
Vcc3 3.3V Supply Voltage -0.3 3.6 V
Vcc18 1.8V Supply Voltage -0.3 2 V
Vin3.3 3.3V Buffer Input Voltage -0.3 3.6 V
Vin3/5 3.3V/5V Buffer Input Voltage -0.3 5 V
Vin1.8 1.8V Buffer Input Voltage -0.3 2 V
8051 Micro
Controller
Data /
Address
Bus
USB 2.0
Interface
USB2.0
USB1.1
Host
PLL, REG
Program ROM
Program RAM
DMA Flash
Control
Logic
EDC/
ECC
DATA RAM
CLK
PWR_GOOD
PWR_RST
Flash
Memory
USB2.0 or
1.1 Port

Intelligent Stick™
Rev. A.0 3/4 Sep 2006
1234
6. DC Characteristics
Symbol Parameter Min. Max. Unit Notes
VDD Power Supply 3 3.3 3.6
VIH Input Voltage 0.9 X VDD -- 5
VIL Input Voltage -0.3 -- 0.2 X VDD
VOH Output Voltage VDD – 0.4 -- --
VOL Output Voltage -- -- 0.4
ILK Input leakage current -1 -- 1
IRW Working Current -- --
IOH IO output current -- 4 --
IOL IO output current -- 4 --
VIH Input Voltage 0.9 X VDD -- 5
7. Recommended Operating Conditions
Symbol Parameter Min. Typical Max. Units
Vcc33 Power Supply Voltage 3.0 3.3 3.3 V
Vin Input Voltage 0 Vcc Vcc+0.3 V
Vcc25 Internal Power Support 2.25 2.5 2.75 v
8. Pin Assignments
Pin No. Pin Name Function
1 VCC USB power input
2 USB D- USB differential signal
3 USB D+ The pairs are used to transmit Data/Address/Command
4 VSS Ground

Intelligent Stick™
Rev. A.0 4/4 Sep 2006
9. Physical Specifications
9.1 Dimensions:
9.1.1 Height: 43mm
9.1.2 Width: 18mm
9.1.3 Depth: 2.8mm
9.1.4 Weight: 2.7g ± 0.5g
9.2 Outline of top view