Precision Pro NX9 User manual

PRODUCT MANUAL
NX9 SLOPE GOLF RANGEFINDER

PRODUCT MANUAL
NX9 SLOPE GOLF RANGEFINDER
1
2
34
5
6
1 - Laser Lens
2 - Optical Lens
3 - Mode Button (Slope + Yards/Meters)
4 - Power & Activate Laser Button
5 - Adjustable Eyepiece
6 - Battery Door
PRODUCT OVERVIEW

1
2
3
4
5
6
1 - Target Acquisition Indicator
2 - Mode Indicator (M1 - Slope O M2 - Slope On)
3 - Battery Indicator
4 - Slope-Adjusted Distance
5 - Yards/Meters Indicator (Yd - Yards M - Meters)
6 - Non-Slope Distance

1. Look through the eyepiece and press the green
power button to turn on the rangefinder. The
crosshair will appear in the middle of the screen.
2. Adjust the focus of the rangefinder by rotating the
dial left or right until the display appears sharp.
4. If slope is on (M2), the slope-adjusted distance will
appear above the crosshair. The non-slope distance
will appear below the crosshair.
5. The rangefinder will automatically turn o after 10
seconds.
HOW TO USE
3. Point the crosshair at the target -- flag, tree,
bunker, etc. Then press and release the green
POWER button to “shoot your target.”
6. Swing with confidence!

Yd - Yards M- Meters
1. Press and hold the black MODE button for three
seconds to change between yards and meters. You
will see a Yd in the bottom right-hand corner for
Yards and a Mfor Meters.
YARDS/METERS

1. Press and release the black MODE button to toggle
between Slope and Non-Slope.
2. When slope is o, you will see an M1 on the left
side of the display. When Slope is turned on, you will
see an M2 on the left side of the display.
SLOPE/NON-SLOPE

SLOPE/NON-SLOPE
1. Open the battery door by sliding the panel away
from the eye piece.
2. Remove the old battery and insert the new battery
to match the image shown inside. Put the battery
door back on and secure tightly.
3. Check the viewfinder to make sure the battery is
fully charged and operating correctly.
4. Double check that the battery door is on securely.
CHANGING THE BATTERY

PAN OVER TARGET: For the best results, pan the
crosshair over the target slowly as you measure the
distance.
PRESS AND RELEASE: When measuring distances,
it’s important to press and then release the green
power button.
Holding the button will not work correctly.
DON’T COVER THE LENS: Make sure the front of
the rangefinder is unobstructed. A finger or side of
the palm will interfere with the laser and result in
inaccurate measurements.
USE BOTH HANDS: Stabilize the rangefinder by
using both hands and steady your arms by bracing
them against your chest.
BEST PRACTICES

1. The built-in magnetic cart mount will adhere to any
flat metal surface. Attach the rangefinder so that the
Precision Pro logo is facing out.
2. When attaching to a frame of a golf cart, make
sure that the rangefinder is parallel with the bar. Not
perpendicular.
MAGNETIC CART MOUNT
CONTACT US

MAGNETIC CART MOUNT
[phone]
[e-mail]
precisionprogolf.com
CONTACT US