Precision Pro ACE User manual

ACE PRODUCT M ANUA L

Please usetheQRCode above to
download the app and pair it with
your rangefinder.
DOWNLOAD THE APP
1

2
Measurements thatare specific to every
golfer and each situation.
Slope-
Adjusted
Weather-
Adjusted
Golfer-
Adjusted
Personalized Slope Calculations

3
1. LCD Display
2. Hole Adjust Arrows
3. Charging Port
4. Magnetic Cart Grip
5. Volume up/down and
play/pausebutton
PRODUCT
OVERVIEW
1
2
3
4
5

1. Back-of-the-Green Distance
2. Center-of-the-Green Distance
3. Front-of-the-Green Distance
4. Slope Adjustment (+/-)
5. Hole Number
6. Battery LifeIndicator
7. Bluetooth Connection
LCD
DISPLAY
1
4
6
2
3
5
7
4

VOLUME
ADJUSTMENT
Volume Min Volume Max
5

SPEAKER QUICKSTART GUIDE
To turn on the ACE Smart Speaker
press and hold the green power
button withthe PPGlogo.
1: Open the Precision Pro Golf app
and follow the pairing instructions to
connect your ACE Smart Speaker.
2:
6
Open the Precision Pro Golf app
and follow the pairing instructions to
connect your ACE Smart Speaker.

and follow the pairing instructions to
SPEAKER QUICKSTART GUIDE
Listen for the ACE Smart Speaker
to chime when successfully paired
with your Precision Pro Golf app.
3: Success! Your phoneis now
paired withthe ACE Smart
Speaker. Enjoy yourmusic
and your round!
4:
7

LET’S PLAY GOLF
In the Precision Pro Golf app,
select the “GOLF” Button in the
center of the menu.
1: Select the course you are about
to play. Press “START ROUND.”
2:
8

LET’S PLAY GOLF
Your ACE Smart Speaker will
now display accurate GPS
measurements to the
front-center-back of Hole #1
3: Click the green power button for
an audible reading of front,
center, and back yardages.
Use the directional arrows to
change holes if necessary.
4:
9

FIND MY PRECISION PRO
In the Precision Pro Golf app,
select “DEVICES” button on the
right sideof the menu.
1: Under the ACE Smart Speaker,
select “Find My Precision Pro.”
2:
10

Connection Successful
FIND MY PRECISION PRO
The screen will show the location
where you were last connected to
your rangefinder.
3: Please Note: Your will need to
have firstconnected your ACE
Smart Speaker and will need to
have cell servicefor thefeature to
function properly.
11

CHARGING YOUR SPEAKER
Your ACE Smart Speaker includes
a USB to USB-Ccharging cable.
1: Plug the charging cable into the
port located at the bottom of the
speaker. Your ACE should have
18-24 hours of battery life when
fully charged.
2:
12

press and hold the green power
button withthe PPGlogo for
seven seconds.
1: When the ACE Smart Speaker
chime and the LCD Display will be
2:
13
POWERING OFF

ACE PAIRING INSTRUCTIONS
14
Make sure the phone
Bluetooth is turned ON and
that the ACE is turned OFF.
1: Openthe Precision Pro Golf
app on your phone and click
on the Devices tab.
2:

Devices
R1 Smart
Rangefinder
CONNECTED
ACE Smart
Speaker
NOT CONNECTED
15
Power on the speaker by
pressing the green button on
the device.
4:
ACE PAIRING INSTRUCTIONS
Tap on the ACE Speaker from
the list of devices and tap
Connect.
3:

CONNEC T
16
ACE PAIRING INSTRUCTIONS
Tap Connect ACE Smart
Speaker. Once you have a
successful connection, leave
the app and enter your phone
Bluetooth settings.
5: Locate the PPG - Ace Speaker
under availabledevices and
pair the speaker. The speaker
will audiblylet you know when
it pairs.
6:

FCC WARNING
This devicecomplies with the part 15 of the FCC Rules. Operation is subject
to thefollowing two conditions: (1) This devicemaynotcause harmful
interference, and (2) this device must accept any interferencereceived,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to complywith the limits for
aClass B digital device, pursuantto part 15 of theFCC Rules. These limits are
designated to provide responsible protection against harmful interference
in a residential instillation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordancewith the
instructions, maycause harmful interference to radio communication. However
there is no guarantee that interferencewill notoccur in particular instillations.
17

18
If this equipmentdoes cause harmful interference to radio or television
user is encouraged to try to correct the interference by one ormore of the
following measures.
- Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
the receiver is connected.
- Consult the dealer or an experienced radio/TV Technician for help.
To satisfy FCC RF exposure requirements, a separation distance of 20 cm or
more should be maintained between the antenna of this device and persons
duringdeviceoperation. To ensure compliance, operations and closer that this
distanceis not recommended.
Limited by local law regulations, version of North Americadoes not have
region selection option.

[e-mail]
precisionprogolf.com/help
[phone]