manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Precision Products
  6. •
  7. Lawn Sweeper
  8. •
  9. Precision Products SW26PRE User manual

Precision Products SW26PRE User manual

SW26PRE - 26” Lawn Sweeper
Owner’s Manual and Parts List
Precision Products, Inc.
LIMITED WARRANTY
This unit is warranted against defects in materials and workmanship to the original
purchaser, under normal use and service, for a period of ninety (90) days from date
of sale. During the Warranty Period, we will repair or replace at our option free of
charge to the original purchaser, any part of the Unit that our examination shows to
be defective in workmanship or materials. This Warranty apply to damage
caused by misuse, abuse, neglect, accident, normal wear, or alterations by
unauthorized persons.
Does Not
Customer Service & Warranty Information
PLEASE DO NOT RETURN THIS MERCHANDISE TO THE STORE. CALL US AND WE WILL TAKE CARE OF ANY
PROBLEM YOU MIGHT HAVE WITH THIS PRODUCT. Phone (800) 225 - 5891 EXT. #204
When ordering parts always give model
number, part description & part number.
Precision Products, Inc.
Parts Division (217) 735-1590
316 Limit Street (217) 735-2435
Lincoln, IL 62656
Send To:
Phone
Fax
On the World Wide Web At: www.precisionprodinc.com
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Top Handle
1/4” L-Bolt
Hamper Rod
1/4” Lock Nut
1/4” x 1-1/2” Hex Head Bolt
Hamper
Sweeper Leg
Chassis Assembly
Adjustment Handle
Bumper Assembly
3/8” Lock Nut
3/8” Pilot Nut
Pinion Pawl
Brush Axle
Wheel Shield
Flange Bearing
5/8” E-Type Snap Ring
Pinion Gear
Tire
Rim
Wheel Bushing
Plastic Hub Cap
Stub Axle
3/8” Spacer Nut
1/4” x 3/4” Hex Head Nut
1/4” x 1-1/4” Hex Head Bolt
Brush Clamp
Brush Strip
Ref. # Part # Part Description Qty. Ref. # Part # Part Description Qty.
1
2
2
14
4
1
2
1
1
1
2
2
2
1
2
2
4
2
2
2
4
2
2
2
2
4
8
4
2062
2060
2063
1778
6129
2079
2065
2055
2043
2066
1771
1773
2067
2068
2069
1770
1768
2077
2037
2078
2035
1769
1643
1660
2049
2048
2041
2042
01/05
8
1
2
2
4
3
6
5
7
7
4
5
3
5
9
10
11 12 13 14
24
25
10
15 16 17 18
19
20
21 17 22
21
23
4
Shown without Chassis Assembly
26
14
27
28
28
4
Parts List for SW26PRE Lawn Sweeper
SW26PRE Assembly
Assembly Components
A. Hamper Rod (2)
B. Sweeper Leg (2)
C. Top Handle (1)
D. Hamper (1)
E. Sweeper Base (1)
A
B
C
D
E
Step 1
Attach the two Sweeper Legs to the
Sweeper Base using four (4)
1/4” x 1-1/2” Hex Head Bolts. Secure
these bolts with four 1/4” Lock Nuts.
STEP 3
Insert the Hamper Rods through the loop of fabric on
both ends of the Hamper. Insert the bottom Hamper Rod
into the slots on both sides of the Sweeper Base. Next,
stretch the Hamper and place the top Hamper Rod
in between the 1/4” L-Bolt and Top Handle Tube..
HOW TO USE YOUR SW26PRE SWEEPER
Brush Height Adjustment:
Dumping Hamper:
Simply pull in on the Adjustment Handle and move up or down to move brushes up and down
to desired height. The most effective way to sweep debris up is to have the brush tips barely
touching the tops of grass blades or pavement. If the unit seems to push “too hard”, move the
adjustment bar one notch higher.
The Hamper is easily dumped by removing the (top) Hamper Rod from both L-Bolts
on the Top Handle and removing the (bottom) Hamper Rod from both sides of the
Sweeper Base. Pull the Hamper assembly out from the unit and dump where desired.
Return the Hamper assembly to the sweeper unit to continue sweeping.
Adjustment Handle
DO NOT LUBRICATE THIS UNIT!
The sweeper bearings are pre-lubricated and sealed prior to
assembly. No other lubrication is needed for this unit.
If you put grease or oil on these the brush .
If you do add a lubrication, simply wipe the wheels and pinions
clean of all grease or oil.
DO NOT GREASE OR OIL THE GEARS IN THE WHEELS.
WILL NOT WORK
Sweeping Direction
Right Side Pinion
Gear & Pawl
Left Side Pinion
Gear & Pawl
Tools Required For Assembly:
Two - 7/16” Wrenches
1/4” x 1-1/2” Hex
Head Bolts
1/4” Lock Nuts
1/4” x 1-1/2” Hex
Head Bolts
Sweeper Legs
Sweeper
Base
Step 2
Attach the Top Handle to both
ends of the Sweeper Legs using
1/4” L-Bolts and 1/4” Lock Nuts.
1/4” L-Bolt
Top Handle
1/4” Lock Nut
Hamper
Hamper Rod (top)
Hamper Rod (bottom)
Slot in Sweeper Base
1/4” L-Bolt
1/4” L-Bolt
1/4” Lock Nut
Sweeper Leg
Sweeper Leg
SW26PRE Assembly
Assembly Components
A. Hamper Rod (2)
B. Sweeper Leg (2)
C. Top Handle (1)
D. Hamper (1)
E. Sweeper Base (1)
A
B
C
D
E
Step 1
Attach the two Sweeper Legs to the
Sweeper Base using four (4)
1/4” x 1-1/2” Hex Head Bolts. Secure
these bolts with four 1/4” Lock Nuts.
STEP 3
Insert the Hamper Rods through the loop of fabric on
both ends of the Hamper. Insert the bottom Hamper Rod
into the slots on both sides of the Sweeper Base. Next,
stretch the Hamper and place the top Hamper Rod
in between the 1/4” L-Bolt and Top Handle Tube..
HOW TO USE YOUR SW26PRE SWEEPER
Brush Height Adjustment:
Dumping Hamper:
Simply pull in on the Adjustment Handle and move up or down to move brushes up and down
to desired height. The most effective way to sweep debris up is to have the brush tips barely
touching the tops of grass blades or pavement. If the unit seems to push “too hard”, move the
adjustment bar one notch higher.
The Hamper is easily dumped by removing the (top) Hamper Rod from both L-Bolts
on the Top Handle and removing the (bottom) Hamper Rod from both sides of the
Sweeper Base. Pull the Hamper assembly out from the unit and dump where desired.
Return the Hamper assembly to the sweeper unit to continue sweeping.
Adjustment Handle
DO NOT LUBRICATE THIS UNIT!
The sweeper bearings are pre-lubricated and sealed prior to
assembly. No other lubrication is needed for this unit.
If you put grease or oil on these the brush .
If you do add a lubrication, simply wipe the wheels and pinions
clean of all grease or oil.
DO NOT GREASE OR OIL THE GEARS IN THE WHEELS.
WILL NOT WORK
Sweeping Direction
Right Side Pinion
Gear & Pawl
Left Side Pinion
Gear & Pawl
Tools Required For Assembly:
Two - 7/16” Wrenches
1/4” x 1-1/2” Hex
Head Bolts
1/4” Lock Nuts
1/4” x 1-1/2” Hex
Head Bolts
Sweeper Legs
Sweeper
Base
Step 2
Attach the Top Handle to both
ends of the Sweeper Legs using
1/4” L-Bolts and 1/4” Lock Nuts.
1/4” L-Bolt
Top Handle
1/4” Lock Nut
Hamper
Hamper Rod (top)
Hamper Rod (bottom)
Slot in Sweeper Base
1/4” L-Bolt
1/4” L-Bolt
1/4” Lock Nut
Sweeper Leg
Sweeper Leg
SW26PRE - 26” Lawn Sweeper
Owner’s Manual and Parts List
Precision Products, Inc.
LIMITED WARRANTY
This unit is warranted against defects in materials and workmanship to the original
purchaser, under normal use and service, for a period of ninety (90) days from date
of sale. During the Warranty Period, we will repair or replace at our option free of
charge to the original purchaser, any part of the Unit that our examination shows to
be defective in workmanship or materials. This Warranty apply to damage
caused by misuse, abuse, neglect, accident, normal wear, or alterations by
unauthorized persons.
Does Not
Customer Service & Warranty Information
PLEASE DO NOT RETURN THIS MERCHANDISE TO THE STORE. CALL US AND WE WILL TAKE CARE OF ANY
PROBLEM YOU MIGHT HAVE WITH THIS PRODUCT. Phone (800) 225 - 5891 EXT. #204
When ordering parts always give model
number, part description & part number.
Precision Products, Inc.
Parts Division (217) 735-1590
316 Limit Street (217) 735-2435
Lincoln, IL 62656
Send To:
Phone
Fax
On the World Wide Web At: www.precisionprodinc.com
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Top Handle
1/4” L-Bolt
Hamper Rod
1/4” Lock Nut
1/4” x 1-1/2” Hex Head Bolt
Hamper
Sweeper Leg
Chassis Assembly
Adjustment Handle
Bumper Assembly
3/8” Lock Nut
3/8” Pilot Nut
Pinion Pawl
Brush Axle
Wheel Shield
Flange Bearing
5/8” E-Type Snap Ring
Pinion Gear
Tire
Rim
Wheel Bushing
Plastic Hub Cap
Stub Axle
3/8” Spacer Nut
1/4” x 3/4” Hex Head Nut
1/4” x 1-1/4” Hex Head Bolt
Brush Clamp
Brush Strip
Ref. # Part # Part Description Qty. Ref. # Part # Part Description Qty.
1
2
2
14
4
1
2
1
1
1
2
2
2
1
2
2
4
2
2
2
4
2
2
2
2
4
8
4
2062
2060
2063
1778
6129
2079
2065
2055
2043
2066
1771
1773
2067
2068
2069
1770
1768
2077
2037
2078
2035
1769
1643
1660
2049
2048
2041
2042
01/05
8
1
2
2
4
3
6
5
7
7
4
5
3
5
9
10
11 12 13 14
24
25
10
15 16 17 18
19
20
21 17 22
21
23
4
Shown without Chassis Assembly
26
14
27
28
28
4
Parts List for SW26PRE Lawn Sweeper

Other Precision Products Lawn Sweeper manuals

Precision Products SW26PRE User manual

Precision Products

Precision Products SW26PRE User manual

Precision Products SW38PRE User manual

Precision Products

Precision Products SW38PRE User manual

Precision Products LSP38 User manual

Precision Products

Precision Products LSP38 User manual

Precision Products LSP48 User manual

Precision Products

Precision Products LSP48 User manual

Popular Lawn Sweeper manuals by other brands

Precision LSP48 owner's manual

Precision

Precision LSP48 owner's manual

Kärcher KMR 1550 D operating instructions

Kärcher

Kärcher KMR 1550 D operating instructions

MTD 63584 owner's manual

MTD

MTD 63584 owner's manual

MTD 190-459A-100 owner's manual

MTD

MTD 190-459A-100 owner's manual

Craftsman 486.241322 owner's manual

Craftsman

Craftsman 486.241322 owner's manual

Agri-Fab 45-0320 repair parts

Agri-Fab

Agri-Fab 45-0320 repair parts

Minuteman pv-7201-bp Operation, service and parts manual

Minuteman

Minuteman pv-7201-bp Operation, service and parts manual

Tanaka Power Sweeper Attachment TSW-210 Illustrated parts list

Tanaka

Tanaka Power Sweeper Attachment TSW-210 Illustrated parts list

Kärcher KM 700 Original instructions

Kärcher

Kärcher KM 700 Original instructions

ZONGSHEN SSG5580A/C Operation manual

ZONGSHEN

ZONGSHEN SSG5580A/C Operation manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.