Preh MCI 15 User manual

Instruction sheet
DM 02 for MCI 15 T4
Prod. No. 90328-9xx/0800
Instruction_sheet_MCI15T4_DM02 subject to change without prior notice Page 1 of 2
preh-keytec/15/02/2007
Driver and Configuration
•This VFD module is communicating via USB using a virtual COM port.
•Please connect the USB connector and the 12V power bypass as shown in figure 7 / 8.
•Factory default settings: 115200-8-N-1 running ESC/POS compatible protocol.
•Manuals and driver software is available here: http://www.preh-keytec.com ÆSupport ÆTouchscreen
turn page Æ
45
2 3
1
Instruction sheet
DM 02 for MCI 15 T4
Prod. No. 90328-9xx/0800
Instruction_sheet_MCI15T4_DM02 subject to change without prior notice Page 2 of 2
preh-keytec/15/02/2007
The materials used for this module are listed by Underwriters Laboratories (UL).
By assembling of modules to the MCI 15 touchscreen, the whole equipment is not covered by the UL-certification anymore!
8
6 7