8
Common Phenomena Trouble Shooting
Instruction trouble shooting
The following cases are not malfunction. Please check according to below steps before asking for service
No current; abnormal voltage; fusing; put in the plug ineffectively, Check the plug and fuse.
Not efficient
The temperature adjustment knob is in the “OFF” poisition;
Space around the refrigerator is not enough;
The door has been opened too frequently and too long;
The refrigerator is exposed to the sunlight directly or placed near some ;
There is no space between foods;
There are hot foods inside the case.
Please read the points of attention, keep away from the , don’t open the door frequently.
Put the hot foods in the case , adjust the knob to “4” or“6” position.
Foods frozen in the steel wire shelf or s rack.
The temperature knob is in “7” position;
Foods containing rich water and freezed easily are near the rear wall. Troubles of sensors or controls,
adjust the knob to “4” position.
Noises
The refrigerator is not located firmly;
The refrigerator has been struck to other objects;
The copper pipe has been struck each other in the mechanical room;
Locate the refrigerator at a firm base and separate the copper pipe from other objects in the
mechanical room.
Compressor can not stop working automatically
Store too much foods at one setting;
Open the door frequently or too long;
The temperature knob is in “7” position;
,
Foods should be stored in separate batches, don t store too much foods at one setting; Decrease the
frequence of opening the door and shorten the time of opening the door;
Compressor cannot start
Turning on the power . the refrigerator cannot work exceeding 30 seconds .pull the plug down at once.
Reinsert the plug, if the refrigerator still don’t w ork , please contact with service department.
heat sources
heat source
after it is cooled down
compartment imple
●
●
●
●
●
●