Prestel KB-IP3 Installation instructions

Copyright(c)2018(V1.0 edition)
USER INSTRUCTION
USE/INSTALLATION
IP Camera Control Keyboard

Preface
Thank you for purchasing our products. Please feel free to contact us if you have any questions
or needs. The purpose of this section is to ensure that the user can correctly use the product
through this manual to avoid danger during operation or property damage. Before using this
product, please read the product manual carefully and save it for future reference.
Declaration
The pictures and descriptions provided in this manual may differ from your current version. If
you have any questions when using this manual, please contact our technical support for
assistance. The content of this manual will be updated from time to time, and the company
reserves the right to keep it informed.
-01-

Contents
-02-
1. Product description...............................................................3
1.1 Brief description.....................................................................................3
1.2 Features ...............................................................................................3
1.3 Keyboard appearance ...........................................................................3
1.4 Keyboard interface.................................................................................4
1.5 System topology diagram ........................................................................5
2. System Settings ....................................................................6
2.1 Languagesetting.....................................................................................6
2.2 Hardware settings..................................................................................6
2.3 Network settings....................................................................................7
2.4 System Upgrade.....................................................................................7
2.5 About the system...................................................................................8
3. PTZ Mode.............................................................................8
3.1 Equipment Management........................................................................8
3.1.1 Auto Search.......................................................................................9
3.1.2 Add manully.......................................................................................9
3.1.3 Delete device .....................................................................................9
3.2 Video Display......................................................................................10
3.3 PTZ Control.........................................................................................11
3.4 PTZ operation menu............................................................................11

1. Product description
-03-
1.1 Brief description
The keyboard is a new generation of Android system network touch keyboard designed and
developed independentlybythe company.10.1inchcapacitivetouch screen,UI design is simple and
friendly.Real-time preview can be enabled on the touch screen of the keyboard,and the image can
be put on the external display through the HDMI interface.Supports H265 single 4K@30fps; H.264
single1080P@60fps;4 channels 720P@30fps decoding, 4-dimensional control joystick for dome
PTZ control,fast positioning target. It can be applied to places where multiple network domes are
installed,such as streets,schools, hospitals, hotels,communities,factories, workshops, etc., to
achieve unified control of the network balls that support the onvif protocol in the LAN.
1.2 Features
10.1 inch capacitive touch screen
Support Android6.0 operating system
Supports H.265/H.264/decoding, 4 screen partitions in the most
Supports viewing images on the touchscreen or dropping images into the display via HDMI
Support network access to our full range of PTZ cameras
Support PTZ control, preset , cruise and track setting and recall
Support ONVIF protocol access equipment
Supports adding 1024 devices in the most
Support U disk upgrade, external mouse
1.3 Equipment appearance

Left button control area: Preset, cruise, scan and other functions quickly set and call
Large middle screen display area: 10.1 inch capacitive touch screen, operation and display area
Right-side joystick control zone: PTZ control for joystick, shuttle can customizable function in
platform mode.
-04-
Operating Output
Control
Up Dowm Left
Right Zoom+ Zoom-
1.4 Interface specification
1
2
3
4
5
67
8
9
Operating Output
Control Operating Output Control
Operating Output
Control Operating Output Control Operating Output Control
4
3
2
No. Name Function
1Switch
Power interface
Network Interface
Audio port
Standard 5.5/2.1 Power Interface, DC 12V2A±10%
Connect Network
Reserved for development

9
8
7
6
-05-
HMDI Output
HMDI Input
RS232
RS485
Reserved for development
External display, synchronized display with 10.1-inch screen
Development Interface
Reserved for development
1.5 System topology diagram
Dome Camera
Switches
NVR
Control keyboard
Dome Camera
Dome Camera
Display
5USB Device upgrade control or external mouse control

2. System settings
2.1 Language settings
Support Chinese and English options, select the small circle in front of the language category
to select Chinese or English.。
-06-
2.2 Hadware settings
Button sound switch ON/OFF

2.3 Network settings
Network settings are static/DHCP optional, Please save it after modification
Note: The IP address of IP Keyboard must be the same network segment as the PTZ Camera to
search for the PTZ Camera.
-07-
2.4SystemUpgrade
Please Copy the upgrade file into a USB flash drive, and then insert the USB flash drive into the
USB port on the back of the keyboard. Click [System Upgrade]. Then pop up the upgrade dialog
box, and then click [Install], after the application is installed, click [Open]
Note: Do not modify the name of the upgrade file. Do not power off when are in upgrade process.

2.5 About the system
The software version number of system
-08-
3. PTZ Mode
3.1 Equipment Management
In the PTZ mode, click the pop-up menu in the upper right corner of the screen, and then
click [Device Management] to enter the device management interface as shown below.

-09-
3.1.1 Auto Search
Click [Search] to search for IP, the [Search Results] dialog box will pop up. After adding the IP
address of the device to be added, click the + , fill in the user name and password of the
corresponding PTZ camera, and then save.
3.1.2 Add manully
Click [Add manully] , pop up the [Add Device] dialog box, enter the device name, IP address,
ONVIF port number, user name, and password, and then save.
3.1.3 Delete device
In the PTZ Mode, in the“Device management”interface, click Edit behind the“Added devices”
column, select the IP address of the device to be deleted, then click [Delete], and then click
[OK].
Note: The red box number is the address of the PTZ camera. In the PTZ control page, you can enter
239 directly on the keyboard and then press the [Address] button to connect the PTZ camera.