Prestigio P260MW User manual

1PRESTIGIO P260MW / P260DVD-X - PRESTIGIO P320MW / P320DVD-X
ENG
Prestigio P260MW / P260DVD-X
Prestigio P320MW / P320DVD-X
User’s Manual
Beforeusingthisproduct,pleasereadthesecurityinstructionsfirstandbeartheminmindwhenusingtheproduct.

2 PRESTIGIO P260MW / P260DVD-X - PRESTIGIO P320MW / P320DVD-X
ENG
Safety Instruction
Warning
TOPREVENT FIRE OR SHOCK HAZARD. DO NOTEXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
THIS SYMBOL IS INTENDED TO ALERTTHE USERTOTHE PRESENCE OF UNINSULATED.DANGEROUSVOLTAGE.
WITHIN THE PRODUCTS ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDETO CONSTITUTE A RISK OF
ELECTRICSHOCKTOPERSONS.
THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND
MAINTENANCE(SERVICING) INSTRUCTIONS INTHE LITERATURE ACCOMPANYINGTHE APPLIANCE.
Important Safety Instructions
Thisequipmenthasbeendesignedandmanufacturedtomeetinternationalsafetystandardsbut,likeanyelectricalequipment,caremust
betakenifyouaretoobtainthebestresultsandsafetyistobeassured.So,pleasereadthepointsbelowforyourownsafety.Theyare
ofageneralnature,intendedtohelpyouwithallyourelectronicconsumerproductsandsomepointsmaynotapplytothegoodsyouhave
justpurchased.
•Readtheseinstructions.
•Keeptheseinstructions.
•Heedallwarnings.
•Followallinstructions.
•Donotusethisapparatusnearwater.
•Cleanonlywithadrycloth.
•Donotblockanyventilationopenings.Installinaccordancewiththemanufacturer’sinstructions.
•Donotinstallnearanyheatsourcessuchasradiators,heatregisters,stoves,orotherapparatus(includingamplifiers)thatproduceheat.
•ThisTVisnotcompletelydisconnectedfromapowersupplyline,asminutecurrentisconsumedevenwhenthePOWERswitchisturned
off.
•Donotplacehotobjectsornakedflamesources,suchaslightedcandlesornighlightson,orclosetotheTV.Hightemperaturescanmelt
plasticandleadtofires.
•DonotsetontopoftheTVanyobjectorcontainerthatmightspillliquids orsmall objectsintotheTV.
•Protectthepowercordfrombeingwalkedonorpinched,particularlyatplugs,conveniencereceptacles,andthepointwhereitexitsthe
apparatus.
•Onlyuseattachments/accessoriesspecifiedbythemanufacturer.
•Useonlywiththecart,stand,tripod,bracket,ortablespecifiedbythemanufacturer,orsoldwiththeapparatus.Whenacartisused,use
cautionwhenmovingthecart/apparatuscombinationtoavoidinjuryfromtip-over.
•Unplugthisapparatusduringlightningstormsorwhenunusedforlongperiodsoftime.
•Referallservicingtoqualifiedservicepersonnel.Servicingisrequiredwhentheapparatushasbeendamagedinanyway,suchaspower
supplycordorplugisdamaged,liquidhasbeenspilledorobjectshavefallenintotheapparatus,theapparatushasbeenexposedtorain
ormoisture,doesnotoperatenormally,orhasbeendropped.
•Theapparatusshallnotbeexposedtodrippingorsplashingandnoobjectsfilledwithliquids,suchasvases,shallbeplacedontheapparatus.

3PRESTIGIO P260MW / P260DVD-X - PRESTIGIO P320MW / P320DVD-X
ENG
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
Overview
Front View
1MASTER SWITCH
2RemoteControlSensor
3POWER:Turns theTVon and off.
4 LED Lights
5VOLUME:Increases or decreasesthevolume.Thisis also used to select the“MOVE&ADJUST”itemon the on-screen menu.
6PROGRAM:Changes channels or“MOVE&ADJUST”toitemson the on-screen menu.
7MENU:To accessorclosemenus,simultaneously.
8TV/VIDEO:Selects an external deviceconnected to theTV.
<DVD> - Depend on the model
9PLAY/PAUSE:Play the DVD or temporarily stopplayback.
10STOP:StoptheDVD playback.
11OPEN/CLOSE:OPEN/CLOSEthe DVD.
12ON/DISC LED
Rear Panel Jacks
1PC INPUT (VIDEO/AUDIO) JACKS
2DVIINPUT(VIDEO/AUDIO:L/R)JACKS: DVI-D Only (Depend on the
model)
3 COMPONENT JACKS (VIDEO :Y,Pb,Pr/AUDIO :L/R)
4 LINE (VIDEO/AUDIO) OUTPUT JACKS
5 VIDEO3 (VIDEO/AUDIO) INPUT JACKS
6S-VIDEO INPUT JACK
7DIGITAL AUDIO OUTPUT JACK (Depend onthe model)
8SCART JACKS (BOTTOM : SCART1, TOP : SCART2)
9 HEADPHONE JACK. Used for headphones that can be purchased
additionally.
10 TV ANTENNA INPUT JACK

4 PRESTIGIO P260MW / P260DVD-X - PRESTIGIO P320MW / P320DVD-X
ENG
Remote Control
1 LINE: External input selection. (TV > RGB > Video1 > Video2 > Video3
> S-Video > Component > DVI (Option) > PC)
2 POWER: Turns the TV on and off.
3 TV: Switches to TV mode.
4 SWAP: Exchanges the video signal source of the main screen and the PIP
window.
5 ON/OFF:Turns PIP on or off.
6 NUMBER BUTTONS: Selects channels directly on the TV.
7 -/—: Selects channels over 10. For example, to select channel 21, press
“-/—” then press “2”,“1”.
8 STILL: Freezes a moving picture on the screen.
9 M/S: Sound mode selection.
10 P.STD: Configures various video settings.
11 ARROW/ENTER: Select an item of menu/Change confirmation.
12 P.SIZE: Changes the screen size.
13 DISPLAY: Displays the current channel and the audio video settings.
14 MUTE: Temporarily mute the sound.
15 TTX: Switches to Teletext mode.
16 SOURCE: Selects the signal source for the PIP window.
17 SOUND: Changes the audio signal source between the main screen and
the PIP window.
18 VOL: Increases or decreases the volume.
19 PRE: Moves to the previous channel.
20 PROG: Changes channels.
21 SLEEP: Selects a preset time interval for automatic shutoff.
22 TV.MENU: Displays the OSD menu.
23 S.STD: Configures various audio settings.
24 EXIT/CANCEL: Exit the current configuration or the teletext display.
<DVD> - Depend on the model
25 DVD: Displays the DVD.
26 OPEN/CLOSE: OPEN/CLOSE the DVD tray.
27 SCAN/SLOW: For fast and slow playback.
28 TITLE: For selecting a title on the disc.
29 SETUP: For initial DVD player settings.
30 STOP: Stop the DVD playback.
31 PLAY/PAUSE: Play the DVD or temporarily stop playback.
32 SKIP/STEP: For skipping to the next chapter/For playing one frame at a time.
33 MENU: For displaying the menu contained in the disc.
<DVD & TTX> - Depend on the model
34 COLOR KEY: Fasttext topic selection.
35 INDEX/REPEAT: Programme selection by name/ For specifying and repeating playback of a segment.
36 MIX/A-B: Video & TTX MIX/For repeated playback of disc titles, chapters or sound.
37 HOLD/PROGRAM:Teletext page/For playback in a specified order.
38 PRE PAGE/ANGLE:Teletext previous page/ For viewing scenes from different.
39 L/F/AUDIO: Switching the LIST or FLOF mode./ For selecting the audio language.
40 REVEAL/GOTO: Teletext reveal/For jumping to a specified location.
41 SIZE/SUBTITLE: Teletext size selection/For selecting the SUBTITLE language.
42 STORE/CLEAR:To store the teletext in the LIST mode/To erase a program content.
43 SUB PAGE/ZOOM:Teletext SUB-PAGE/For magnifying the screen.
44 NEXT PAGE/SURROUND: Teletext NEXTPAGE/For stereophonic sound effect.

5PRESTIGIO P260MW / P260DVD-X - PRESTIGIO P320MW / P320DVD-X
ENG
Connecting Your TV
Connecting an Antenna or Cable without a Decoder box
Connecting the Scart Jack
ConnectionProcedures
1SCART1 isusedforthe equipmentwithan RGBoutput,such
asvideogamedevicesorvideodisc players. This end can be
fittedwith:
-ASCARTconnector
-Three RCA connectors(VIDEO+AUDIO_L+AUDIO_R)
Procedures for watching a Video over a VCR
1TurntheTVon,andselect‘VIDEO1’using theLINEbutton on
theremote control.
2If you have a second VCRand wish to copy cassette tape,
connect the source VCR to SCART1 and the target VCR to
SCART2so that you can redirect thesignal from SCART1 to
SCART2.
Connecting a Digital Audio System (Depend on the model)
ConnectionProcedures
1Connect the DIGITAL OUT (black) jack on the back ofyour
TV to the DIGITAL IN jack of the Decoder or AV amplifier.
To use the digital out
1TurntheTVon,andselect‘DVD’usingtheDVDbuttononthe
remotecontrol.
2Turn thedigitalampon andselect theexternalinputmode.

6 PRESTIGIO P260MW / P260DVD-X - PRESTIGIO P320MW / P320DVD-X
ENG
Connecting the Video or S-Video/Audio Jacks
ConnectionProcedures
1Connectthe antenna cabletotheANTENNAIN terminal on
the back of your VCR.
2 Connect the VIDEO/AUDIO INPUT jacks of the TV and the
video/audiooutputjacksofyourVCRwiththe video/audio
cables.(Connectthe cable to theterminalofthesame color)
-You can use the S-Video cable to connect a VCR or a DVD
player for better video quality.
- If your VCR does not support stereo sound, connect the
mono audio out jack to the AUDIO INPUT (left) jack.
Procedures for watching a video over a VCR
Turn theTV on,andselect‘VIDEO 3’using the LINEbuttononthe remotecontrol.
-If youhaveconnectedaS-Videocable,select‘S-VIDEO’.
Connecting a External TV
ConnectionProcedures
1Connectthe AUDIO CABLES between theAUDIOOUTLand
Rjacksontheback of your TV and thecorrespondingAUDIO
INPUTjacks on externalTV.
2ConnecttheVIDEOCABLE between the VIDEO OUT jack on
thebackof your TV andthecorrespondingVIDEOINPUT jack
on external TV.
Towatchthe externalTV
1Turn the externalTVon and select‘VIDEO’using the
externalinputbutton.
2Turn the your TV on.
Connecting the DTV Receiver
ConnectionProcedures
1 The COMPONENT VIDEO IN and COMPONENT AUDIO IN
connectors are used for equipment with a DVD or DTV re-
ceiverout.(480i/60Hz,480p/60Hz,576i/50Hz, 576p/50Hz,
720p/50Hz,720p/60Hz,1080i/50Hz,1080i/60Hz)
To watch the DTV
1 Turn the TV on,and select‘COMPONENT’using the LINE
buttonontheremotecontrol.
2 Turn the DTV Receiver on.
Connecting the DVI JACK (DVI-D

7PRESTIGIO P260MW / P260DVD-X - PRESTIGIO P320MW / P320DVD-X
ENG
Only: Depend on the model)
ConnectionProcedures
1Connect the DVIinputjack oftheTVand theDVIoutput jack
of your DTV Receiver.
2 Connect the DVI audio input jacks of the TV and the DVI
audiooutputjacks ofyourDTV Receiver withtheaudio cable.
Check Before Using
Pleasecheckthe following check list before using theTV.
1Istheantennacable connected properly?
2Are the remote control batteries installedproperly?
- Install two AAA size batteries according to the correct polarity.
-Theremote controlworksup to about 7~10m from theTV,3mtothe left or right of theTV,and to within 30 degreesfrom
the remote control sensor of theTV.
3Havethereceivechannelsbeenconfigured?
4Arethecablesconnectedtoanyexternal devices connected properly?
TV Function
Watching TV
Turning the TV On and OFF
1Plugthemainslead into an appropriate socket.
2Pressthe POWERswitchonthebottomofthe televisiontoward“ON”(I).
3Press the POWER button on theremote control (or on the frontpanel of the unit.)
You can also switch on by pressingthePROG\//\buttons.
•Whenyou turn the power ON, the screen appears and thePOWER/STANDBYlightis turned off.
•When you turn the powerOFF,the screengoes blank,and the POWER/STANDBY lightturnsred.
•Do not leaveyour televisioninStandbymodeforlongperiodsoftime (when youareawayonholiday,for example).Turn
yourtelevisionoffbypressingthePOWERswitchtoward“OFF”(O).It isbest tounplugtheset from the mains and aerial.
Selecting the Menu Language
1 Press theTV.MENU button.The OSD MENU will be displayed.
2Select FUNCTION usingthe/\ \/buttonandthen pressthe> button.
3LANGUAGE using the /\ \/ button and thenpress the > button.
4Selectthedesiredmenulanguageusingthe/\\/button.
5Press the EXIT/CANCEL button to exit themenu.

8 PRESTIGIO P260MW / P260DVD-X - PRESTIGIO P320MW / P320DVD-X
ENG
Viewing the Status Information
Pressthe DISPLAY buttonon the remotecontrol.TheTVwilldisplay theinputsource,thepicturemode,thesoundmode,the
STEREOmode,thesleeptime,thecurrenttime,andthepipmode.
Adjusting the Volume
Adjustthe volume using the VOL /\ \/ button.
Muting the Sound
Pressthe MUTEbutton.YoucanconvenientlyusetheMUTEbuttonwhen atelephoneor a door bell rings.To cancel,pressthe
MUTEbuttonagain.
Viewing a Video, DVD or COMPONENT
PresstheLINEbutton.
Storing Channels Automatically
1 Press theTV.MENU button.The OSD MENU will be displayed.
2Select SETUP using the /\ \/ button and thenpressthe > button.
3 Select AUTO PROGRAMMING using the /\ \/ button and then press the >
button.
4SelectCOUNTRY using the /\ \/ button and then press the > button.
5Select your COUNTRYusingthe /\\/buttonand thenpressthe> button.The
countriesaredisplayedinthefollowingorder.
6Select SEARCH using the /\ \/ button and then pressthe>button.
Manual Storing of Channels
Whenstoringchannels manually,youcanchoose:
-Whether or not to store each of the channelsfound.
-Theprogramme number bywhichyouwish to identifyeachstoredchannel.
1 Press theTV.MENU button.The OSD MENU will be displayed.
2Select SETUP using the \/ /\ button and thenpressthe > button.
3 Select MANUAL PROGRAM using the \/ /\ button and then press the >
button.
4Select SYSTEM using the \/ /\ button andthenpress the > button.
AUTO > BG > DK > I > L > LP > AUTO
5Select PROGRAMNO.usingthe \//\button andthenpress the>button. And
pressthe\//\buttonto select the requiredchannel number.
6SelectSEARCH using the \/ /\ button and then press the>button.
Thetunescans the frequency range until the first channel on the channel that youselectedisreceived on your screen.
7Select STORE using the \/ /\ button andthenpress the > button. And press the \//\ button to select the OK.
8 Repeat Step 5 to 7 for each channel to be stored.

9PRESTIGIO P260MW / P260DVD-X - PRESTIGIO P320MW / P320DVD-X
ENG
Channel Name
1 Press theTV.MENU button.The OSD MENU will be displayed.
2Select SETUP using the /\ \/ button and thenpressthe > button.
3SelectNAMEusingthe/\\/ button and then press the > button. And press
the /\ \/ < > buttons to edit the name.
/\\/:Select the characters (A~ Z, 0~9, -, +).
< > :move on the previous or next letter.
4SelectSTOREusingthe/\ \/ button and then press the >button.Andpress
the /\ \/ button to select the OK.
5Press the EXIT/CANCEL button to exit themenu.
Activating the Child Lock
Thisfeatureallows you to preventunauthorizedusers,suchas children, fromwatchingunsuitableprogrammersby muting
outvideoand audio. Child Lockcannotbereleased using front panelbuttons.Onlyremote control can releasetheChildLock
setting,sokeep the remote control away from children.
1 Press theTV.MENU button.The OSD MENU will be displayed.
2Select SETUP using the /\ \/ button and thenpressthe > button.
3 Select MANUAL PROGRAM using the /\ \/ button and then press the >
button.
4Select CHILD LOCK using the /\ \/ button andthen press the > button.
5To lock the channel,select LOCKbypressingthe /\ \/button.
ActivatingtheChildUnlock
1-4STEP1~STEP4 is the same as that of Activating the Child Lock.
5Whenalogin dialog box appears, enter the password to deactivate the CHILD LOCK.
Note
• When child lock is activated, only entering the correct password will proceed to the operation
before you can do auto or manual searches. Everything previously locked will be unlocked.
Program Edit
Thisfunction enables you todelete,copy,moveor
skipthestoredprograms.
1Selectthechanneltotuneusingthenumericorchannelbuttons.
2 Press theTV.MENU button.The OSD MENU will be displayed.
3Select SETUP using the /\ \/ button and thenpressthe > button.
4SelectPROGRAM EDIT using the /\ \/ button and then press the > button.
DeleteaProgram
1 Select a program to the deleted with the \/ /\ < > buttons.
2PresstheREDbutton.The selected program is deleted. All the following programs are shifted up one position.
Moving a Program
1 Select a program to the moved with the \/ /\ < > buttons.
2PresstheGREENbutton.
3 Move the program to the desired program number with the \/ /\ < > buttons.
4Pressthe GREEN button again to release this function.

10 PRESTIGIO P260MW / P260DVD-X - PRESTIGIO P320MW / P320DVD-X
ENG
Copy a Program
1 Select a program to the copied with the \/ /\ < > buttons.
2PresstheYELLOWbutton.Allthefollowingprograms are shifted down one position.
Skipping a Program Number
1 Select a program to the skipped with the /\ \/ < > buttons.
2PresstheBLUE button. The skipped program turns to Magenta.
3Press the BLUE button again to release thisfunction.
Whena program number is skipped itmeans that you will be unableto select it using the /\ \/button during normal TV
viewing.Ifyouwantto select the skipped program, directly enter program numberwiththenumberbuttonsorselectit in
theprogram edit or table menu.
Changing Channel
1UsingtheCHANNELbuttons
PressthePROG\//\buttons to change channels.
You will see all the channels that theTV has memorized.(TheTV must have memorized at least three channels.)
2UsingtheNUMBERbuttons
-To change tosingle-digitchannels(0~9)faster,press“0”beforethesingledigit.
Example:Forchannel 4,press“0”,then“4”.
-To select a channel over 10,press the -/— button first.
Example:Forchannel 42,press“-/—”,then“4”,then“2”.
3UsingthePrevious Channel
PressthePREbutton on the remote control.
TheTVchangedtothelastchannelsto the last channel you were watching.
When the Picture Quality is Poor or Unstable
Usefinetuningtoadjusta particular channelforbetterpicture quality when noiseinterferes,colorquality is poor,or the
screenisunstable.
1Selectthechanneltotuneusingthenumericorchannel buttons.
2 Press theTV.MENU button.The OSD MENU will be displayed.
3Select SETUP using the /\ \/ button and thenpressthe > button.
4 Select MANUAL PROGRAM using the /\ \/ button and then press the >
button.
5Select FINE TUNE using the /\ \/buttonand then press the > button.
6Press the /\ \/ button tofine tune and then press the >button.
Ifyou are unable to fine-tune a channel, checkthatthe SYSTEM settings are correct.
7Select STORE using the /\ \/ button andthenpress the > button. And press the /\\/button to select OK.
8Press the EXIT/CANCEL button to exit themenu.
Selecting the Picture Status
Youcanselect avideomodefrom among USER,STANDARD,DYNAMIC,orMILDmodeaccording toyourpersonal preference.
QUICK! Press the P.STD button.
Wheneveryou press this button,PICTURE STATUS changestoUSER>STANDARD > DYNAMIC>MILDmode,inthisorder.
1 Press theTV.MENU button.The OSD MENU will be displayed.
2SelectPICTUREusing the /\ \/ button and then press the v button.