Prestigio P400MW User manual

1PRESTIGIO P400MW / P460MW
ENG
Prestigio P400MW / P460MW
Colour Television
Owner’s Manual
Please read this manual carefully before operating your set. Retain it for future reference.
See the label attached on the back cover and quote this information to your dealer when you require service.

2 PRESTIGIO P400MW / P460MW
ENG
Contents
Installation ........................................................ 3
Remote control handset ..................................... 4
Controls ................................................................ 4
Batteryinstallation ................................................ 5
Controls of Front panel ....................................... 6
Connections of Back panel ................................. 7
Connection to External equipment ...................... 8
1 Connect to Aerial socket ..................................... 8
2 Watching VCR .................................................... 8
3 Watching Cable TV ............................................. 9
4 Watching external AV source ............................. 9
5 Watching DVD ................................................. 10
6 Connecting HDMI (DTV) ................................... 10
7 Connecting PC (DTV) ........................................ 11
8 Connecting Digital Audio .................................11
Basic operation ................................................ 12
1 On and Off ....................................................... 12
2 Programme selection ....................................... 12
3 Volume adjustment .......................................... 12
4 On screen language selection ........................... 12
On screen menus ............................................. 13
Menu selection ................................................... 13
Setting up TV stations ...................................... 14
Auto programme tuning .................................... 14
Manual programme tuning ................................. 15
Programme edit .................................................. 17
Calling the programme table ............................... 18
Picture adjustment ........................................... 19
CSM (Colour Status Memory) ............................... 19
PSM (Picture Status Memory) .............................. 20
Manual Picture Control ....................................... 20
Picture format .................................................... 21
Sound adjustment ........................................... 22
SSM (Sound Status Memory) ............................... 22
Balance ...............................................................23
AVL (AutoVolume Leveler) .................................. 23
SRS ..................................................................... 24
TVSpeaker .......................................................... 24
Stereo/Dual/NICAMreception ..............................25
Time Menu ...................................................... 26
Clock ...................................................................26
On/OffTime .........................................................26
Auto sleep ...........................................................27
Sleeptimer .......................................................... 27
Setup Menu ..................................................... 28
Front Light ......................................................... 28
Child Lock ...........................................................28
Connection of PC .............................................. 29
PC Setup ............................................................. 29
WXGA (or VGA (Only RGB mode)) ........................29
PIP(Picture-in-Picture) Feature ......................... 30
Watching PIP ...................................................... 30
PIP Audio Output ................................................ 30
Moving the PIP ................................................... 30
Swapping the PIP ...............................................31
Selecting a Input Signal Source for the PIP ......... 32
Programme selection for sub picture ..................32
Programme scan .................................................32
Teletext (option) .............................................. 33
External Control Device Setup ........................... 35
DisplayableMonitor ......................................... 43
Specification .......................................................43
Troubleshooting .............................................. 44
Checklist .............................................................44

3PRESTIGIO P400MW / P460MW
ENG
Installation
Power
This set operates on an AC mains supply,the voltage is as indicated on the label on the back cover.Never apply DC power
to the set. In the event of thunderstorms or power-cuts, please pull out the aerial and mains plugs.
Warning
To prevent fire or shock hazard,do not expose the set to rain or moisture.Do not rub or strike the Active Matrix LCD with
anything hard as this may scratch,mar,or damage the Active Matrix LCD permanently.
Service
Never remove the back cover of the set as this can expose you to very high voltage and other hazards. If the set does not
operate properly,unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 .on the back cover.For the best reception an outdoor aerial should be
used.
Location
Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the
settoanyunnecessaryvibration,moisture,dustorheat.Alsoensurethatthesetisplacedinaposi-tiontoallow a free flow
of air.Do not cover the ventilation openings on the back cover.
Cleaning
Unplug the set before cleaning the face of the LCD Screen.Dust the set by wiping the screen and the cabinet with a soft,
cleancloth. If the screen requires additional cleaning, use aclean,dampcloth. Do not use liquid cleaners or aerosol cleaners.
To preserve the Environment,
do not rubbish.

4 PRESTIGIO P400MW / P460MW
ENG
Remote control handset
Controls
Before you use the remote control handset, please install the batteries.
-All the functions can be controlled with the remote control handset.
-Some functions can also be adjusted with the buttons on the front panel of the set.
POWER
switches the set On from standby or
Off to standby.
NUMBER BUTTONS
PSM (Picture Status Memory)
recalls your preferred picture setting.
LIST
displays the programme table.
MENU
selectsa menu.
Q.VIEW
returns to the previously viewed
programme.
TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details,see the‘Teletext’
section.
PIP
Switches the sub picture On or Off.
A.SWAP
PIP mode - main and sub picture
audio select.
PIP PR +/-
Selects a program for the sub
picture.
SWAP
Alternates between main and sub
picture.
PIP INPUT
Selects the input mode for the sub
picture.
PIP POSITION
relocates the sub picture in
clockwise direction.
STILL
freezes motion of the sub picture.
SCAN
switches on the programme scan
mode through 4/16 sub pictures.
MUTE
switches the sound On or Off.
SSM (Sound Status Memory)
recalls your preferred sound
setting.
ARC
select your desired picture format.
I/II
selects the language during dual
languagebroadcast.selects the
sound output.
INPUT
Select TV, AV1,AV2, AV3, AV4, S-
VIDEO,COMPONENT1,COMPONENT2,
PC-RGB,HDMI1, HDMI2 mode.
switches the set on from standby.
EXIT
exits from each mode.
SLEEP
setsthe sleep timer.
/\ / \/ (Programme Up/Down)
selects a programme or a menu
item. switches the set on from
standby.
< / > (Volume Up/Down)
adjusts the volume. adjusts menu
settings.
OK
accepts your selection or displays
the current mode.
- COLOURED BUTTONS
These buttons are used for teletext
(only TELETEXT models) or
programme edit.

5PRESTIGIO P400MW / P460MW
ENG
Battery installation
-Your remote control handset is powered by two AAA type batteries.
1 To insert batteries,turn the remote control handset over and remove the battery cover.
2 Put the two batteries into the compartment observing battery polarity.
3 Replace the cover.
To avoid damage from possible bat-tery leakage, remove the batteries if you do not plan to use
the remote con-trol handset for an extended period time. Do not use batteries of differing age or
type. Always discard of batter-ies safely.

6 PRESTIGIO P400MW / P460MW
ENG
Controls of Front panel
-Shown is a simplified representation of the set.
-Here shown may be somewhat different from your set.
-This manual explains the features available on the P400MW / P460MW series.
1. MAIN POWER
switches the set On or Off.
2. /\ / \/ (Programme Up/Down)
selects a programme or a menu item.
switches the set On from standby.
3. < / > (Volume Down/Up)
adjuststhe volume.
adjustsmenusettings.
4. MENU
selectsamenu.
5. INPUT SELECT
selectsTV,AV1,AV2,AV3,AV4,S-VIDEO,COMPONENT1,COM-
PONENT2,PC-RGB,HDMI1, HDMI2 mode.
6. POWER
switches the set On from standby or On to standby.
7. POWER/STANDBY INDICATOR
illuminates red in standby mode.
illuminates green when the set is switched On.
8. REMOTE CONTROL SENSOR
9.Front Light LED

7PRESTIGIO P400MW / P460MW
ENG
Connections of Back panel
1
8
9
AUDIO INPUT
AUDIO INPUT
AUDIO
AUDIO
R
R L
COMPONENT1 INPUT
(480i/480p/720p/1080i/1080p)
Y
Y P
b
b P
r
r
ANT. IN AC INPUT
RGB INPUT AV1 AV 2 AV3 OPTICAL
HDMI1 INPUT HDMI2 INPUT RS-232C INPUT
(CONTROL/SERVICE)
S-VIDEO
R
R
L
L
R
R
L
L
Y Pb Pr
AUDIO
VIDEO
A
V4
V4
AUDIO INPUT
AUDIO INPUT
COMPONENT2 INPUT
COMPONENT2 INPUT
3 42 5 6 7
1. HDMI1INPUT / HDMI2 INPUT / AUDIO INPUT
/ RGB INPUT SOCKETS
Connecttheset output socket of the PERSONAL COMPUTER
to this socket.
2. RS-232C INPUT(CONTROL/SERVICE) PORT
Connect to the RS-232C port on a PC.
3. AUDIO INPUT / COMPONENT1 INPUT (480i /
480p / 720p / 1080i / 1080p) SOCKETS
4. AERIAL SOCKET
5. EURO SCART SOCKET
connect the euro scart socket of the VCR to these sockets.
6. Digital Audio (OPTICAL)
Connect digital audio from various types of equipment.
Note : In standby mode, these ports
will not work.
7. POWER CORD SOCKET
This set operates on an AC power.The voltage is indicated
on the Specifications page. Never attempt to operate the
set on DC power.
8. AUDIO / VIDEO INPUT (AV4, S-VIDEO)
Connect video out from an S-VIDEO VCR to the SVIDEO in-
put.
Connecttheaudio/video out socketsoftheVCRtoAVsock-
ets of the set.
9. AUDIO INPUT / COMPONENT2 INPUT (480i /
480p / 720p / 1080i / 1080p) SOCKETS

8 PRESTIGIO P400MW / P460MW
ENG
Connection to External equipment
-You can connect additional equipment, such as VCRs, camcorders etc. to your set. However please check with your
manufacturers instruction books for specific information. Make sure all connections are made with both your set and
additional appliance unplugged from the mains to avoid damaging your equipment. Here shown may be somewhat
different from your set.
1 Connect to Aerial socket
Connect the RF out socket of the VCR to the aerial socket on the
back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
StoretheVCR channel on a desired programme number using the
‘Manual programme tuning’ section.
Select the programme number where the VCR channel is stored.
Press the PLAY button on the VCR.
2 Watching VCR
- If you connect an S-VIDEO VCR to the S-VIDEO input, the
picturequality is improved;comparedto connecting aregular
VCR to the Video input.
- To avoid picture noise (interference), leave an adequate
distance between the VCR and set.
UsetheINPUTSELECTbuttonontheremotecontroltoselect
AV1,AV2,AV3,AV4or S-VIDEO.
(If connected to S-VIDEO,select the S-VIDEO external input
source.)
Insert a video tape into the VCR and press the PLAY button
on theVCR.(SeeVCR owner’s manual)

9PRESTIGIO P400MW / P460MW
ENG
3 Watching Cable TV
- After subscribing for a local cable TV station
andinstallinga converter you can watch cable
TV.
- For further information of cableTV,contact
the local cable TV station.
In using connection 1
Select programme number in programme
switch of cable box.
Match the set programme with selected
programme of cable box.
Select your desired programme with the remote control for cable box.
In using connection 2
Use the INPUT SELECT button on the remote control and select AV1,AV2,AV3,AV4 or S-VIDEO.
Tune to cable service provided channels using the cable box.
4 Watching external AV source
When connecting the set to an external
source, match the colours of AUDIO/VIDEO
inputjackson the set with the output jacks
onthe audio/videoequipment:Video =yel-
low,Audio (Left) = white,Audio (Right) =
red.
Usethe INPUT SELECT buttononthe remote
control to select AV1, AV2, AV3, AV4 or S-
VIDEO.
Operatethecorrespondingexternal equip-
ment. See external equipment operating
guide.

10 PRESTIGIO P400MW / P460MW
ENG
5 Watching DVD
How to connect
Connect DVD video inputs to Y, PB, PR of
COMPONENT (DVD INPUT) and audio inputs
to Audio sockets of AUDIO INPUT.
How to use
Turn on the DVD player,and insert a DVD.
UseINPUTSELECT button on the remote con-
trol to select COMPONENT1, COMPONENT2.
Refertothe DVD play-er’s manual for operat-
inginstructions.
• COMPONENT Input ports
You can get better picture quality if you con-
nect DVD player with COMPONENT input ports as below.
6 Connecting HDMI (DTV)
Connectthe signal cable from the monitor
outputsocket of the PERSONAL COMPUTER
to the HDMI INPUT socket of the set.
Connect the audio cable from the PC to
the AUDIO INPUT sockets of the set.
Press the INPUT SELECT button to select
HDMI1,HDMI2.
Switch on the HDMI, and the HDMI screen
appears on the set.
HDMI-DTV input signal : 480p-60Hz,
576p-50Hz, 720p-50Hz, 720p-60Hz,
1080i-50Hz, 1080i-60Hz, 1080p-50Hz,
1080p-60Hz.
HDMI Interface with HDCP Copy Protection enables alldigital rendering of video without the losses.
This TV SET can receive the High-Definition Multimedia Interface(HDMI) or Input of Digital Visual Interface(DVI).