PRIXTON G100 User manual

Kids Tracker GPS Watchi! G100
Prixton

Child Tracker Watch User Manual
Please read the instruction manual carefully before using in order to install properly and use
instantly. For the watch color, please refer to the real product.
I.Preparation before using
i. Check if the model is correct and all accessories are included.
ii. Choose a SIM Card of GSM network (GSM 850/900/1800/1900). For details, please refer to
the seller's advice.
iii. SIM card terminals need to open GPRS and Caller ID function. (Attention: Please shut down
the watch before card installation)
iv. Install an APP into Smart phone. As for the APP, please consult your seller.
II. Function
Dual-control: Smart phone APP or PC GPS service platform remote control
Real-time locating, tracking and monitoring;
Pedometer & Sleep monitoring
SOS emergency alarm and dial familyNumber
Bluetooth anti-lost function
Electric fence function
Low-battery alarm function
Watch-removal alarm
Remote shutdown
III. Watch presentation
Note: SOS familyNumbers should be set in APP before dialing in order to make the Numbers
specified. SOS FamilyNo. 1 corresponds to Key 1. It can be dialed directly by long pressing Key
1 for 3 seconds. Same as SOS FamilyNo.2, which corresponds to Key 2.
POWER SW/ Hang-up
Button
USB interface
Key 2: FamilyNo.2/
Volume-
SOS Key (for
answering phone
calls)
Key 1: FamilyNo.1/
Volume+

IV: Screen instructions
V. APP instructions
i. APP log in
Account: watch’s ID number which is sticked inside of the back case.
Password: Default 123456 (Password can be changed in APP)
Enter the correct account and password in the APP to log in, and enter the main interface as
below:
ii. APP function menu interface
In the function menu, you can query and set the relevant terminal parameters, as
below:
GSM, GPRS, GPS, Battery
Time& Date
Pedometer（Pedometer will be replaced by
week if it’s shut down in APK / APP）

1. Locating
Click to locating, watch’s current location can be actively fed back on the map. Parents can track
child’s position real time.
2. Alarm
All kinds of alarm information can be checked, including SOS alarm, tips when entering or exiting
the safe area, low battery alarm, watch-removal alarm, Bluetooth anti-lost alarm, etc.
When watch is triggered for emergency, the platform will alarm immediately and sent alarm
message to APP. Users can check these alarm message anytime.
3. Steps
Monitor Child’sdaily sports information. Count up child’s weekly sports data. Parents can master
child’s exercise condition exactly.
4. Sleep
Sleeping quality can be monitored on the basis of how many times children turned over when
sleeping. By collecting how many times children turn over weekly, parents can get to know
whether their children have good quality sleeping.
5. History
By summarizing children’ daily location and setting checking time, parents can know and master
child’s movements condition.
6. Setting
Parents can set the watch’s parameters and information according to actual needs.
7. Security area
User can set the safety area. When Child enter and exit safety area, message will be sent to APP,

parents can master if the child’s activities is normal or not.
8. Change password
Initial password is 123456. Password can be changed in order to protect the child’s activities
information.
9. Logout
Click this menu to logout the APP
10. Anti-lost (This function supports Android system only, can’t support IOS system. )
Watch can be connected to smart phone by Bluetooth. If watch get far away, alarm message will
be sent to APP. The alarm can be stopped and the anti-lost function can be shutdown according to
click the alarm notice.
Operating steps as follows:
(1) Open Bluetooth on smart phone and turn on anti-lost in APP.
(2) Search watch
(3) Choose the watch’s ID No.( The Bluetooth name is same as watch’s ID No.)
(4) Pairing code is 1234.
5) If pairing is successful, Watch will prompt that Bluetooth connected, APP terminal will alarm.
6) If Bluetooth is disconnected, watch will prompt that Bluetooth disconnected, APP terminal will
get alarm message and alarm at the same time.
iii. Settings instruction
In the settings options, the relevant terminal information, parameters and functions can be set, as
shown below:

1.Setting monitor Number
After the monitor number is set successful(the number can be smart phone number or
fixed-line telephone number), can remote monitor the surrounding circumstance of the watch by
open the Dialing monitor number function but watch terminal is without knowing it.
2.Setting SOS Number
Can set three SOS numbers, the setting method is same as family number, SOS number One
same as family number 1, tie up the key“1”（namely Volume +); SOS number two is family
number 2, tie up the key“2”（namely Volume-）. When the watch dial phone number out, it is OK
to press SOS key about 3 seconds.
When in an emergency, press SOS key about 3 seconds, the watch screen indicatesSOS, the
watch will be in the state of alarm and dial the three SOS numberstwice automatically. If get
through it will stop dialing. If no answering it will dial twice automatically. It will send alarm
message to APP at the same time.
3.Turn on Voice Monitoring
This function can be used after setting Monitor Number.
4.Setting GPS work-time period

According to user’s requirement, can set four period. In the period of setting time, the
watch’s GPS will work as the uploading interval mode what have set.
5.Setting GPS Work-time Length
Default length is 3 minutes, click location, the watch will open GPS immediately, uploading
interval per 10 seconds. It will recover to the work mode what have set after 3 minutes.Users can
set the GPS work time length between 1 minute to 30 minutes according to their own requirement.
6.Setting low battery alarm
The Watch battery capacity display in percentage. If less than 15%, it will alarm after 5
minutes. The watch will send alarm message to the APP.
7. Setting take off alarm
The watch have a sensor on the strap. If wearing time is above 3 minutes, it will alarm when
take off the watch. The watch will send alarm message to the center number (default closed), and
send the alarm notice to APP.
8.Setting Pedometer
The watch have vibration sensor. Users can turn on the pedometer function during exercise, it
will begin to counter steps, the watch will indicate the users’ stepsnumber real time so that the
users can know the exercise station through the APP. The watch pedometer state will change to
week after turn off the pedometer function.
9. Remote Shutdown
Watches can be shutdown by “press the key without SIM card” , “press the key with SIM
card”, “remote shutdown by APP”and “outage”
The method of pressing the key with SIM card to shutdown is as follows,
Step 1: Short press SOS button 5 times;
Step 2: Short press Key 1 one time;
Step 3: Short press Key 2 one time.
VII. Troubleshooting
6.1 Can’t power on
i. The battery has no power, connecting charger to charge one hour ( it will be full )
ii. Check the battery wiring is solid or not .
6.2 When turning on the watch first time, App end displays off -line after landing. Please check:

i. Check whether SIM card is installed properly and whether the screen display is normal. PS:
please refer to the instructions pictures in the UM
ii. Check whether SIM card is fees owned, whether data traffic opened and whether signal is
normal.
iii. Check whether the GPRS service is canceled.
iv. Consult your supplier whether the parameters of the terminal server has been set,and check the
relevant parameters.