Pro DG Systems CMA-12BT User manual

WWW.PRODGSYSTEMS.COM
User Manual

Precautions
Please read, keep, and follow all safety and use instructions.
Important Safety Instructions.
1. Heed all warnings.
2. Do not overload the box to avoid damage to the speakers.
3. Do not use this product near water. If the box is used outdoors, make sure that no humidity can
enter the box.
4. Clean only with a dry cloth.
5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
6. Do not install near any heat sources such as radiators, heat registers, stoves or similar (including
amplifiers).
7. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding-type plug has two blades and a third grounding
prong. The wider blade or third prong is provided for your safety. If the provided plug does not fit in
your outlet, consult an electrician for replacement of the obsolete outlet.
8. Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where it exits from this product.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer
or sold with the product. When a cart is used, use caution when moving the
cart/product combination to avoid injury from tip-over.
11. Unplug this product during lightning storms or when unused for long periods of time.
12. Refer all servicing to qualified personnel. Servicing is required when the product has been
damaged in any way such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the product, the product has been exposed to rain or moisture, does not operate
normally, or has been dropped.
WARNINGS/CAUTIONS:
This symbol on the product means there is uninsulated, dangerous voltage within the
product enclosure that may present a risk of electrical shock.
This symbol on the product means there are important operating and maintenance
instructions in this guide.
This product contains magnetic material. Consult your doctor on whether this might affect
your implantable medical device.
Contains small parts which may be a choking hazard. Not suitable for children under age 3.

System Setup Connections and Controls

Indicator Light: Power / Signal / Limit.
TWS Button: Press once to enter True Wireless Stereo Bluetooth mode.
Bluetooth Button: Press once to connect a Bluetooth device or disconnect a paired Bluetooth
device.
DSP Preset: There are three preset mode: Vocal / DJ / Live.
Jack L/R Input: Balanced L/R jack input for getting signals from mixers or preamplifiers.
XLR CH1/CH2 Input: Balanced XLR input for getting signals from mixers or preamplifiers.
XLR CH1/CH2 Output: Balanced XLR connectors connected in parallel to the inputs to connect
another device (e.g. another active speaker system).
Line Select Button: Press down for CH1 line output, press up for CH1/CH2 line output.
CH1/CH2 VOL: CH1/CH2 Volume Control.
BT/LINE Select Button: Press down for Bluetooth mode, press up for line mode.
Power Switch: Turns unit on or off.
Power Supply Voltage Switch: Select between 110V or 220V AC mains power.
AC Input: Please Use AC input cable from the original manufacturer only.
Technical Specifications
CMA 12 BT
CMA 15 BT
Power Handling
1000W Program/500W RMS
1200W Program/600W RMS
Nominal Impedance
4Ohms
4Ohms
Average Sensitivity
97dB
98dB
Maximum SPL Calculation
127 dB SPL @ 1m
128 dB SPL @ 1m
Frequency Range
50 - 20000 Hz
48 - 20000 Hz
Nominal Directivity
90° x 60°
90° x 60°
Low / Mid Frequency Driver
12” steel frame woofer,
65mm VC, 50oz magnet
15” steel frame woofer,
75mm VC, 60oz magnet
High Frequency Driver
34mm Ti. driver
44mm Ti. driver
Amplifier
Class-D Amplifier
Class-D Amplifier
Rigging Points
0
M8x3pcs
Connectors
2 XLR / Jack input channels
with mic and line switch +
RCA + XLR Link
2 XLR / Jack input channels
with mic and line switch +
RCA + XLR Link
Controls
2 Channels and 2 Mic
Preamps + DSP with 3 presets
+ Bluetooth & TWS function
2 Channels and 2 Mic
Preamps + DSP with 3 presets
+ Bluetooth & TWS function
Power Supply
110~220V 60/50HZ
110~220V 60/50HZ
Acoustic Enclosure
PP
PP
Finish
Black paint
Black paint
Grille
1.0mm
1.0mm
Mounting Options
35mm mounting
35mm mounting

WWW.PRODGSYSTEMS.COM
Cabinet Dimensions
35x35x61.5cm
42x38x69.5cm
Gross Weight
17.8KG
23KG