Pro DVX ABPC-4200 User manual

Quick start
guide
The information in this document is subject to change without notice. © 2022 ProDVX Europe B.V. All rights reserved.
ABPC-4200 | 4220
Please check the website or scan the QR-code for more product information.
www.prodvx.com/support
guide
ABPC-4200 | 4220

This package contains: Quick connection settings
Android Box PC Quick start guide *Please note that it is
prefered not to use power
tools to attach the device
to the mount or stand.
How to start:
Step 1: Take contents out of the box, make sure all components are present.
Step 2: Connect the Box PC to a screen or display. Optionally, mount using
the VESA screwing holes or a VESA mount.
Step 3: Connect to power supply via DC power adapter (or PoE+ for the ABPC-4220).
Step 4: Connect to Wi-Fi if your product does not have PoE+.
Step 5: Install and configure customer application on connected screen or display.
Step 1: Connect the Box PC to a screen/display, plug in power supply (or PoE+ cable, if using the
ABPC-4220), and turn on the Box PC and screen/display. If you are using PoE+ for both power
and data, continue to step 5. If you are using Wi-Fi, swipe up in the home menu of the screen or
display to arrive in the app drawer. Once there, select Settings.
Step 2: In the settings menu, go to Network & internet, located at the top of the menu.
Step 3: In the Network & internet menu, and select Wi-Fi.
Step 4: Turn on Wi-Fi and select desired Wi-Fi network, and fill in credentials to connect to internet.
Tools necessary
but not included
Caution:
Please note this product contains a small clock battery. Please return the product to a
certified repair centre for proper replacement of the battery; battery disposal can be
dangerous.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area can cause harmful interference, in which case the user
will be required to correct the interference at their own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation
Europe/UK – EU/UK Declaration of Conformity
This device complies with the essential requirements of the Radio Equipment Directive
(2014/53/EU). The following test methods have been applied in order to prove
presumption of conformity with the essential requirements of the Radio Equipment
Directive. This equipment is compliant with Class A of EN55032. In a residential
environment, this equipment may cause radio interference.
Correct Disposal of this product.
This marking indicates that this product should not be disposed of with other
(household) waste. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the sustain-
able reuse of material resources. To return your used device, please use the return and
collection systems or contact the reseller where the product was purchased. They can
take this product for environmentally safe recycling.
“FCC & CE RF Radiation Exposure Statement Caution: To maintain compliance with
the FCC & CE’s RF exposure guidelines, the product must be placed at least 20cm from
nearby persons.”
The recommended temperature for the ProDVX Box PC and accessories is 0°C-45°C.
ABPC - 4200 | 4220 Quick start guide
Wi-Fi antenna
*DC power adapter 12 V and power plugs are
only included with the ABPC-4200
DC power adapter 12 V
Power plugs for Europe, UK & US*
Audio
HDMI in
HDMI out
IR
PIR
GPIO
LAN port
Wi-Fi
12 V DC-in
On / O switch
USB-C port
USB 3.0 port
USB 2.0 port
RS232 port
BacksideFrontside
Step 5: Install and configure your desired applications.