pro master P180 User manual

Thank you for purchasing the ProMaster P180 manual control studio moonlight. The P180 is designed for the
casual photographer looking for a portable, reliable, economical studio lighting solution. Standard features
include color-temperature corrected circular flash tube (5600k), fixed reflector providing large lighting coverage
and even lighting effects, continuous power level adjustment, remote optical slave sensor, audible flash ready
signal, built-in umbrella holder, and adjustable locking flash mount.
Light Components
Optical Trigger Receiver
Vent
Main Body
Handle
Control Panel
Umbrella Holder
Mounting
Bracket
Mounting Knob
Optical Slave Switch
Power Switch
Power Fuse
Test Button
Sync Socket
POWER
TEST
SYNC
CHARGE
P.CELL BUZZ
FUSE 5A
MODE
1/16 FULL
LED Charge Indicator
Audio Signal
Switch
Modeling Light Mode Switch
Flash Intensity Adjustment
Power Socket
Operation
1. Insert the modeling lamp bulb gently into the base inside of the built-in reflector. Avoid touching the lamp with your
fingers as the oil from your skin can reduce the life of the lamp.
2. Turn on the power supply by pressing the power switch. The LED charge indicator light will turn green indicating that
the unit is ready to use.
3. Press the test button to make sure the flash working.

4. Select the modeling light mode with the Modeling Light Mode Switch. At the top position, the modeling lamp is fixed
at full power. In the center position the modeling lamp is off. In the bottom position, the modeling lamp intensity can
be varied by the Flash Intensity Adjustment knob.
5. Use the Flash Intensity Adjustment knob to select desired exposure.
6. Link the flash unit to your camera using a synch cord, the built-in slave sensor, or a radio trigger (optional) to trigger
the flash.
7. Turn the audio signal switch to the on position (o) to activate the audible flash ready signal. When the audio signal
switch is set to the off position (|) the audible flash ready signal is disabled.
Safety Precautions
1. Before using the flash, make sure that your lighting equipment is plugged into a 110 volt AC power source.
2. Do not expose your lighting equipment to sunlight, moisture, dust, dirt, rain or water.
3. Any exposure to chemical solutions, gasoline, grease, oil, paint, or detergents can result in permanent damage to
your equipment.
4. Do not insert any metal objects into your lighting equipment.
5. Do not touch or handle equipment with wet hands or allow your equipment to be in contact with water.
6. Be sure to disconnect from the power supply when the light is not in use.
7. Do not attempt to repair your lighting equipment yourself.
8. Avoid rapid continuous firing of your flash. Continued rapid firing may cause excessive heat build up and potential
damage to your unit.
Specifications
Power: 180 watt second (joule) at full power
Color Temperature: 5600k ± 100k
Guide Number: 151’ /46m @ 100 ISO
Modeling lamp: 50 watt / 120 volt G6.35 Bipin Halogen Lamp
Power Setting: Continuous, 1/16th to full power
Optical Slave: Built-in, effective up to 35’ / 10m depending on conditions
Recycling Time: .2 to 1.5 seconds
Power Input: AC110 - 130 volt, 60Hz
Fuse: 5 Amp – 5A 250V
Weight: 1 lb. 14 oz. approx.
Size: 9 ½” L x 4 ½” Ø x 7 ½” H (aprox. With bracket collapsed)
ONE YEAR UNCONDITIONAL GUARANTEE
If for any reason, this ProMaster product fails within ONE YEAR of the date of purchase, return this product to your
ProMaster dealer and it will be exchanged for you at no charge. ProMaster products are guaranteed for ONE FULL YEAR
against defects in workmanship and materials. If at any time after one year, your ProMaster product fails under normal use,
we invite you to return it to ProMaster for evaluation.
Code 9455
Made in China
www.promaster.com
Fairfield, CT 06825