PRO-TEK 9750HD IP User manual

Full HD Digital Satellite Receiver
User’s Guide
Full HD Digital Satellite Receiver
HD Video Formats 1080i, 720p, 576p
Internet Connection Ethernet Port
USB 2.0 Ready
Dolby Digital 5.1 Audio Decoding
Smart Card Reader
HD Analog & HD Digital Output
Scart Video/ Audio Output
Max. 9999 TV & 4999 Radio Channels

Manufactured under license from Dolby Laboratories. DOLBY and the double-D
symbol are trademarks of Dolby Laboratories.
Correct disposal of this product. This marking shown on the product or its
literature indi cates that it should not be disposed with other household wastes
at the end of its working life. To prevent possible harm to the environment or
h uman health from uncontrolled waste disposal, please separate this from other
material resources. Household users should contact either the retailer where
they purchased this product or their local government office for details of where
and how they can dispose this product for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product should not be mixed with other commercial
wastes for disposal.
The lightning flash with arrowhead symbol within an equilateral triangle is intended
to alert the user to the presence of un-insulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamat ion point within an equilateral triangle is intended to alert the user to
the presence of important operating and servicing instruct ions in the literature
accompanying the appliance.
WARNING: THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT
NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
WARNING: TO ENSURE RELIABLE OPERATION A ND PREVENT THE HD-RECEIVER FROM OVER
HEATING, YOU MUST REMOVE THE PROTECTIVE PLASTIC FILM FROM THE HD-RECEIVER
COVER.
CAUTION: TO PREVENT ELECTRIC SHOCK, ENSURE AC POWER PLUG IN FULLY INSERTION INTO
THE POWER SOCKET.
WARNING: THE MAINS PLUG IS USED AS THE DISCONNECT DEVICE.
THE DISCONNECT DEVICE SHALL REMAIN READILY OPERABLE.
CAUTION: CHANGES OR MODIFICATIONS NOT EXPRES SLY APPROVED BY THE MANUFACTURER
WILL VOID THE USER'S WARRANTY.
CAUTION : TO AVOID THE RISK OF ELECTRIC SHOCK,
DO NOT OPEN. NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ii
Safety Information

1. Read and Retain this User's Guide
This User's Guide should be read before the HD-Receiver is operated and retained for future reference.
2. Use Correct Power
This HD-Receiver should be operated only from the type of power source indicated on the rear panel.
3. HD-Receiver Installation
Do not place HD-Receiver on an uns table trolley, stand, tripod, b racket, or table as it may fall, causing
serious injury to a child or adult and damage the HD-Receiver.
4. Provide Antenna Ground
If an outside antenna or cable system is connected to the HD-Receiver, be sure the antenna or cable
system is grounded to provide some protection against voltage surges and built-up static charges.
An outside antenna system should not be located in the vicinity or overhead power lines, or other power
circuits, where it can fall onto such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching or approaching such power lines or circuits as
contact with them might be fatal. Installing an out door antenna can be hazardous and should be
left to a professional antenna installer.
5. Provide Proper Ventilation
Opening slots in the HD-Receiver cabinet are provided for ventilation to ensure reliable HD-Receiver
operation and to protect it from overheating. HD-Receiver should not be located in an enclosed / built-in
installation such as a bookcase unless proper ventilation is provided.For sufficient ventilation,
there must be at least 10cm free air space above, behind, top and on each side of the HD-Receiver.
6. Keep Away from Heat
Do not expose the HD-Receiver to direct sunlight. This product should be situated away from heat
sources such as radiators, heat registers, stoves and other electronic products (including amplifiers)
that produce heat.
7. Keep Away from Moisture
Do not use HD-Receiver near water or in wet areas such as near a bathtub, wash bowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool and the like.
Caution: Maintain electrical safety, power line operated equipment or accessories connected to this
unit should bear the CE listing mark on the accessory itself and should not be modified to defeat the
safety features. This will help avoid any potential hazard from electrical shock or fire.
8. Do Not Open
Do not attempt to service this HD-Receiver, as opening or removing HD-Receiver cover will expose
you to dangerous voltages. To prevent of the risk of fire or electric shock, do not open the cabinet.
There are no user serviceable parts inside the HD-Receiver. Refer servicing to qualified service
personnel only.
9. Unplug before Cleaning
When cleaning the HD-Receiver, turn the HD-Receiver power off and unplug it from the wall AC outlet
before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning only.
10. Object and Liquid Entry
Never push objects of any kind through HD-Receiver openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric sh ock.Never spill liquid of any kind on the
HD-Receiver. In case of liquid spillage, please contact your qualified service center.
11. For Additional Protection
For added protection during a lightning storm, or when left unattended for long periods of time, unplug
the HD-Receiver from the AC wall outlet and disconnect the antenna and A/V cable system. This will
prevent damage to the HD-Receiver from Lightning and power line surges.
These important safeguard messages will help ensure your enjoyment and proper use of the
HD-Receiver and accessories. Please
read them carefully before you begin to operate your
HD-Receiver product.
iii
Important safeguards

1. Overview of the equipment 1
1-1. Front Panel 1
1-2. Rear Panel 1
1-3. Remote Control 2
1-4. Accessories 2
2. Connecting your HD-Receiver 3
2-1. Antenna Connection 3
2-2. Video Connection 3
2-2-1. HDMI (High Definition Multimedia Interface) connection 3
2-2-2. Connecting to a HDTV with HD YPbPr 4
2-2-3. Connecting to a Conventional TV with Composite Video 4
2-2-4. Connecting to a Conventional TV wtih SCART connection 4
2-3. Audio Connection 5
2-3-1. Stereo Audio Connection 5
2-3-2. Digital Audio Connection 5
2-4. LAN Connection 5
3. Getting Started 6
Step-1. Check the contents in the gift box 6
Step-2. Connect ANT Cable 6
Step-3. Connecting the Video 6
Step-4. Connecting the Audio 6
Step-5. Connecting the Power 6
Step-6. Install the Remote Control batteries 6
Step-7. Video Format Setting 6
Step-8. Check up the On Screen Display 6
Step-9. Select the Satellite and Automatic Channel Search 6
Step-10. Change Programs 6
4. Using the Menu system 7
4-1. Preferences 7
4-1-1. Edit Channel List 7
4-1-2. Timers Setup 7
4-1-3. Preferred Languages 7
4-1-4. OSD Language 7
4-1-5. Preferred Audio Type 7
4-1-6. InfoBar Time Out 7
4-2. System Setup 8
4-2-1. 4:3 Channels Display As 8
4-2-2. 16:9 Channels Display As 8
4-2-3. GMT Offset 8
4-2-4. Summer Time 8
4-2-5. Restore Factory Defaults 8
4-2-6. Network Setting 8
Contents
iv

4-3. Installation 8
4-3-1. Switch Type 8
4-3-2. LNB Setup 8
4-3-3. Motorized System 9
4-3-3-1. DiSEqC 1.2 Setting 9
4-3-3-2. USALS Setting 9
4-3-4. Channel Scan 9
4-3-5. Edit Satellite 9
4-4. Smart Card 10
4-5. System Information 10
4-6. USB Menu 10
4-6-1. Contents Browser 10
4-6-2. Connect Drive 10
4-6-3. Disconnect Drive 10
4-6-4. Drive Format 10
5. Direct Buttons of the Remote Control 11
5-1. INFO (Information) 11
5-2. FAV (Favorite) 11
5-3. SUB TITLE 11
5-4. EPG (Electronic Program Guide) 11
5-5. TELETEXT 12
5-6. RECALL 12
5-7. OPTION (MULTI-FEED) 12
5-8. SAT 12
5-9. MUTE 12
5-10. VIDEO FORMAT 12
5-11. I-II (Audio Track) 12
5-12. OK (Channel List) 12
5-13. TV / RADIO 12
6. Firmware Upgrade 13
6-1. Checking current firmware version 13
6-2. Update from the USB memory device 13
7. Trouble Shooting Guide 13
8. Specifications 14
Contents
v

LNB IN :Connect the satellite antenna cable from the LNB.
IF OUT :Connect to another digital satellite receiver.
Output Select Switch :Select Output to HD YPbPr or SCART RGB
LAN :Connect Internet Cable.
USB :Connect USB Device such as USB Memory for software upgrade or channel data exchange.
HDMI :Connect to the TV using HDMI Cable.
S/PDIF Coaxial :Output the S/PDIF Coaxial digital audio signal.
S/PDIF Optical :Output the S/PDIF Optical digital audio signal.
VIDEO :Provide SD composite video output to the TV or VCR equipments.
Y/Pb/Pr :Provide HD component video output to the TV or other equipments.
AUDIO L/R :Provide stereo audio output to the TV or VCR equipments.
TV SCART :SCART Output to the TV or other equipments.
1-2. Rear Panel
STANDBY Button : Switch the HD-Receiver between standby mode and operation mode.
VIDEO FORMAT Button :Change HD Video Format among 1080i, 720p or 576p.
MENU Button :Show the Main Menu on the screen.
OK Button : Use to make selection in the Menu and show the Channel List on the screen.
LEFT / RIGHT (V- / V+) : These buttons increase/decrease the volume levels. They are also
used to move left/right in menus and interactive screens.
UP / DOWN (P+ / P-) : These buttons switch to previous or next service. They are also used
to move up/down in menus and interactive screens.
Front Display :Show the channel information, current time and the HD-Receiver status.
Remote Sensor : Infrared Remote Control sensor. To ensure reliable remote control operation,
do not place any objects in front of the sensor.
SMART CARD Slot : One SMART CARD Slot
1. Overview of the equipment
1
This section summarize HD-Receiver Buttons, Remote Control and the Terminals.
1-1. Front Panel

1-4. Accessories
Carefully remove the HD-Receiver from the carton. Check that the HD-Receiver has not been damaged.
The following accessories are included.
Two AAA(LR03) Batteries Wireless Remote Control This User’s Guide
1-3. Remote Control
Switch the HD-Receiver between
standby mode and operation mode.
Switch the sound on / off. Change HD Video Format among
1080i, 720p or 576p.
Change the satellite on the program
list.
Switch between Television services
and Radio services.
Enter a TV / Radio program number. It also
input the alphabet for program name search.
Switch between the current program
and the previously viewed program.
Adjust the audio volume level. Change up / down the program.
Navigate the cursor up, down,
left, right in the menu system.
Also UP/ DOWN buttons are
work for program up / down.
Activate the menu system on the
screen.
Exit the current menu system.
Select the audio track.
Show the sub title track if applicable.
Show the teletext on the screen if
applicable.
It is working with additional functions
such as select multi-feed program if
applicable.
These color buttons are used with different
functions in each menu.It will be guided by
on-screen help display.
Display favorite items on the
program list.
EPG
Display the EPG
(Electronic Program Guide)
Display the detailed program information
and Now / Next event.
Select an item in the menu system
or shows the Channel List.
1. Overview of the equipment
2

Connect satellite antenna cable to the LNB IN socket of the HD-Receiver.
If you have another Satellite Receiver, you may link it from the LOOP OUT connector.
This chapter describes how to connect your HD-Receiver to the TV and other equipments.
The HD-Receiver provides various connection methods for your TV, VCR and other equipments.
2-1. Antenna Connection
2-2. Video Connection
If you have two or more antenna dish, you can use DiSEqC switch. Connect DiSEqC
switch OUT to LNB IN connector of HD-Receiver. You can use Tone-burst switch
or DiSEqC 1.0 switch. If you have motor system with DiSEqC
1.2 or USALS, please refer to article 4-3-3-1 & 4-3-3-2 for more
detailed installation information.
2-2-1. HDMI (High Definition Multimedia Interface) connection
Connect HDMI Video cable to the HDMI output terminal on the rear of HD-Receiver. Connect the other
end of HDMI Video cable to the HDMI Input terminal on the HDTV. The HDMI connection carries whole
digital video & audio signal and there is no required additional audio connection. Set up the video
format to desired resolution. This HDMI output supports
1080i/ 720p/ 576p Video Format. Please make sure, the
HDMI output does not support SD (576i) Video resolution.
3
2. Connecting your HD-Receiver

2-2-2. Connecting to a HDTV with HD YPbPr
Attention: Please make sure that the Output Select Switch is in YPbPr position!
Connect YPbPr Video cable to the HD terminal on the rear
of HD-Receiver. Connect the other end
of YPbPr Video cable to the HD YPbPr input terminal on the HDTV. Usually, the Y is Green, Pb is
Blue and Pr is Red color assigned. Set up the video format
to desired video resolution.
2. Connecting your HD-Receiver
4
2-2-3. Connecting to a Conventional TV with Composite Video
Conn ect a Video Cable to the TV Video terminal on
the rear of the HD-Receiver.Connect the other end
of Video Cable to the Video In terminal on the TV.
2-2-4. Connecting to a Conventional TV wtih SCART connection
Attention: Please make sure that the Output Select Switch is in RGB position!
Connect a SCART Cable to the TV SCART terminal on the rear of the HD-Receiver. Connect the other
end of the SCART Cable to the SCART terminal on the TV. Please make sure, the Output Select
Switch should be RGB position for correct SCART RGB operation.
YPbPr
RGB

This HD-Receiver can support three different methods for connecting audio signals. Each of the audio
connections delivers the same audio sound. You can select desired audio connection by following the
Audio Connection Diagrams below. Please make sure, if you are using HDMI connection, you do not
need this Audio Connection. The HDMI connection is already included Digital Audio internally.
2-3-1. Stereo Audio Connection
Stereo audio connector deliver analog stereo sound or Dolby Digital Down mixed 2 Channel analog
stereo sounds. Connect Audio Cable to Audio L/R terminal on the rear of the HD-Receiver. Connect the
other end of the Audio Cable to the conventional TV Audio Input or Stereo Amplifier Audio Input.
2-3. Audio Connection
2. Connecting your HD-Receiver
5
2-4. LAN Connection
Connect here the network cable from your internet router to access to internet for firmware updates.
LR
Home
Theater
System
AMP
2-3-2. Digital Audio Connection
Optical Digital Audio and Coaxial Digital Audio deliver Dolby Digital 5.1 digital sound or PCM digital sound.
If you have a Home Theater system with Digital Audio input, then you can use Digital Audio connection.
For the Optical Audio connection, connect the Optical Audio Cable (Available in Local Store) to the Optical
Audio terminal on the rear of the HD-Receiver. Connect the other end of the Optical Audio Cable to the
Optical Audio Input terminal on the H ome Theater System. For the Coaxial Audio connection, connect the
RCA Cable to the Coaxial Audio terminal on the rear of the HD-Receiver. Connect the other end of the
RCA Cable to the Coaxial Audio Input terminal on the Home Theater System.

Step-1. Check the contents in the gift box.
After opening the gift box, you should check up and find the following items.
࡮Digital HD-Receiver
࡮Remote Control
࡮User’s Guide
࡮2 Batteries (AAA or LR03 size)
Step-2. Connect ANT Cable
Connect satellite antenna cable to LNB-IN of the HD-Receiver.
Connect another antenna cable between LOOP-OUT of other Receiver if applicable.
Step-3. Connecting the Video
Prepare TV or HDTV you want to connect.
There are several methods to connection of video. You should find correct connection
method for your HDTV. Please refer to article 2.2 Video connection diagram.
Step-4. Connecting the Audio
Prepare HDTV or Audio equipment you want to connect. If you are using HDMI connection,
you do not need audio connection.There are two different connection methods for Audio
connection. For general TV set with analog audio connection, it has AUDIO L/R. For digital
audio connection, you should prepare Optical / Coaxial Audio cable for optical / Coaxial audio
connection with Home Theater Equipment.
Step-5. Connecting the Power
Plug the Power Cord to wall AC outlet. The power source is AC 180-250V~, 50/60Hz. This unit is
designed for continuous operation. Switching it off does not disconnect it from the AC outlet.
To disconnect this HD-Receiver from AC outlet, you have to unplug the HD-Receiver.
Step-6. Install the Remote Control batteries
1) Open the battery compartment on the back of the Remote Control.
2) Install two AAA or LR03 size batteries as shown. The battery has polarity so when insert
the batteries, make sure the `அ` and `இ` terminals are oriented correctly.
3) Replace the cover.
Note :
If you find missing or broken part, then ask to
supplier or contact to service center.
Step-7. Video Format Setting
For the Video Format Setting, Press the button at the Remote Control for
video format change. The default video format is 1080i.
Step-8. Check up the On Screen Display
For verify correct setting of Video Format, you should check up the OSD from HDTV’s display
screen. Turn on the HD-Receiver and HDTV. Press button on the Remote Control, you
should check up the OSD for verify A/V connection. If you cannot find any OSD in your TV
display, please check up again the Video Format Setting and A/V connection.
Step-9. Select the satellite and Automatic Channel Search
Please select the satellite and perform the Automatic Channel Search. The HD-Receiver will
automatic starting the available channels. For doing proper channel search, you should refer to
article 4-3 Installation.
Step-10. Change Programs
You can change the program using P or P button in your Remote Control. Or you can
direct select the program with pressing the number button in your Remote Control.
MENU
6
3. Getting Started
Note :
࡮Do not mix different types of batteries,
or mix an old and a new battery.
࡮Remove and replace weak batteries.
Weak batteries can leak and damage
your remote controller.
࡮ Dispose batteries properly, never throw
them into a fire.

OK
OK
OK
MENU
MENU
EXIT
In the Menu system you can adjust whole setting and function
of HD-Receiver. If you press the button, the menu screen
will display. You can move up/down using or button
in the Remote Control. Press or / button to select
the items. Press button again will go back to one step back.
Press button will quit the menu system. If there is no
Remote Control activity more than 60 sec, then all menu will
automatically disappear for prevent unwanted operation.
You can see TV Channel Edit screen by pressing button
at the Edit Channel List menu. In this menu, you can move,
delete or sort each channels and categorized favorite groups.
If you want move or delete the channel, select channel and
press . Also you can perform the multiple channel move
by using button. Actual data saving will be done
when exit channel edit menu. When you are using sort option
please be careful because there is no way back to previous
channel list order. So we recommend save current channel
lists to USB memory stick before you sorting.
For more information fo r back up, please refer to article 4-5.
The P / P buttons will act page up / down in this menu
respectively. Each channel can registered multiple favorite
groups and quick find function will help you to find designated
channels quickly.
࡮Wake Up Timer : You can set the wakeup timer to turn on the HD-Receiver at desired time.
The time format is Hour : Minute.
࡮Disabled : If you don’t want to set wakeup time, you should set ‘Disabled’.
࡮Enabled: You can set time whenever you want to wakeup by press or button and you can
set channel type and wakeup channel.
࡮Switch Off Timer : You can set the switch off timer to turn off the HD-Receiver at desired time.
࡮Channel Type : You can select TV or Radio.
࡮Wake Up Channel : You can select wakeup channel among various channels.
4-1-1. Edit Channel List
4-1-2. Timers Setup
4-1. Preferences
4-1-4. OSD Language
This HD-Receiver supports multiple OSD languages. You can select the desired OSD language
in which the menu would be displayed. Once you select the OSD language, the menu will immediate
change to selected OSD language.
4-1-3. Preferred Languages
You can find two type of language selection items. One is for the EPG language, the other is for audio
language. Each of them has two items respectively. First selected languages are always precedence
of second languages. If there are no first selected audio or EPG language within current program then
second languages are selected automatically.
4-1-5. Preferred Audio Type
You can select audio type between Stereo Audio and Dolby Digital.
If current program services both of them, it will output selected audio track automatically.
4-1-6. InfoBar Time Out : You can set up the display duration of information bar. (3, 5, 10, 30, 60sec)
Before switched off by Switch Off Timer, the receiver will notify warning message on the OSD.
You can choose “YES” or “NO” whether switch off the HD-Receiver.
7
4. Using the MENU System

4-3-2. LNB Setup
Next step, you should properly setting up LNB for receive the signal. You can select satellite and
LNB Type depends on your antenna. Before doing this setting, you should have knowledge about
your antenna system. Last offset item only available when you setting up LNB2. If you have one
antenna with two LNBs then you can use this option. Offset means LNB2's relative angle value
than LNB1's angle value. Supported values are 0 , 3 , 6 .
4-2-4. Summer Time : You can set summer time “Enable” or “Disable” condition if needed.
4-2-5. Restore Factory Defaults
You can make all data and configurations as factory default status except external HDD or USB device.
After doing this, all stored data except external HDD or USB device will be erased and returned
to factory default.
4-2-6. Network Setting
4-3. Installation
4-3-1. Switch Type
You can select LNB switch type which you are now using.
If you choose DiSEqC item, each DiSEqC port assign to LNB
by number. In other words, DiSEqC port 1 assign to LNB1 and
DiSEqC port 2 assign LNB2 and so on.
4-2. System Setup
4-2-1. 4:3 Channels Display As
If you have 16:9 wide-screen TV and current serviced
program is 4:3 then you can select full screen mode or
pillar box mode.
4-2-2. 16:9 Channels Display As
If you have conventional 4:3 TV and current serviced
program is 16:9 then you can select full screen mode,
letter box mode or pan & scan mode.
4-2-3. GMT Offset : You can set the Greenwich Mean Time (GMT) offset where you lived.
You should configure the system settings appropriately to your television set and other appliances.
4. Using the MENU System
8
If your network system provides DHCP server then setting
up the DHCP Enable, then all information will automatic
received from DHCP server. If not you should enter the IP,
Subnet mask, Gateway, DNS1 and DNS2 information manually .
At lastly, set up the Network to Enable. You can check up
the LAN cable connection with LED at the LAN connector.
Green LED is LINK and Yellow LED is SPEED.

4-3-5. Edit Satellite
This HD-Receiver supports 104 default satellite lists. Also user can add, remove and modify satellites.
If you are using USALS system, you should carefully enter the real satellite position value.
Otherwise you can’t get signal from newly added satellit e.
4-3-3-2. USALS Setting
Step-1. Select satellite and transponder as you wish to setup.
Step-2. Enter the longitude and latitude value properly as you are positioned.
Step-3. Move to motor control item and select “Go to” option then press button.
The antenna will move to angular position based on real satellite angle.
Step-4. If the signal status is not good, you should adjust antenna position by movement item.
Step-5. There is no “store position” item in the USALS menu because all mechanism operates
by actual satellite position (angle). So if you can’t get a good signal by doing Step-4, you
must calibrate your antenna position by manually.
4-3-4. Channel Scan
After all antenna setting was properly done, you can start channel scanning for add up new
channels. Before you starting search, also you can choose NIT search, channel type, access
type options as you wish. There are three types of search methods which is Manual, Auto and Multi.
Usually Multiple search will be done one by one so it will take long scanning time than Manual
or Auto search.
࡮Manual : One transponder search in one Satellite
࡮Auto : All transponder search in one Satellite
࡮Multi : All transponder search in multiple Satellites
If you want add new transponder then enter the frequency, polar and symbol-rate value in the
transponder item. If there is new channel available in this transponder then it will be added
transponder list, if not it will be ignored and remove from the list. Please make sure, this operation
is only work under the manual channel search.
Note :
For advanced control command, you’d better refer to STAB’s motor reference manual.
Since it is intended for installer or expert users so we recommend that normal user
should not handle it by himself.
4-3-3. Motorized System
If you are using motor system, you can calibrate the antenna followed by below menus
(DiSEqC 1.2 or USALS) depends on which motor system you have. You can dynamic check up the
received signal status with quality and strength bar at the right side of OSD. Normally you don’t
need to adjust the advanced control menu if antenna is properly setting up, but sometimes antenna
installer needs more complex commands. In this case you can simply enabling advanced control
item, and you can access the ‘reset’, “set limit”, “go to reference” commands and so on. If you use
these commands, please be careful otherwise you will be confused for LNB setup.
4-3-3-1. DiSEqC 1.2 Setting
Step-1. Select satellite and transponder as you wish to setup.
Step-2. Move to motor control item and select “Go to” option
then press button. The antenna will move to stored
position which receiver has.
Step-3. If the signal strength and quality is not good, you can
adjust antenna position by movement item.
Step-4. If you can get good sig nal, move again motor control
item then press or button to choose store position.
Step-5. At lastly, press button then the current position
data will be overwritten on the previous stored data.
OK
OK
OK
4. Using the MENU System
9

4-4. SmartCard
4-5. System Information
In this menu, you can check up the model name, current
software/ hardware version and upgrade latest firmware
through USB memory stick. Also you can import or export
channel list. For the firmware upgrade, please refer to the
Section 6. Firmware Upgrade.
࡮ Load Channel List from USB : Import channel lists from
USB memory stick which is previous saved channel lists.
࡮ Save Channel List to USB : Export current channel lists
to USB memory stick.
When saving channel list to USB, the file name is automatic
created by current date and file extension will be ‘.cdb’.
4. Using the MENU System
10
Some broadcaster broadcast scrambled service and it
required paid subscription for watching TV. The scrambled
services can only be watched with subscription card. This
HD-Receiver has One Smart card slot for insert the
Subscription Card. To watch a pay service you should
take the following steps;
Step-1. Check if subscription card of your provider is supported
by this HD-Receiver
Step-2. Purchase a subscription card for the pay service which
you want to watch.
Step-3. Insert the subscription card into the Smart card slot
Step-4. Please make sure the card’s contact should be up
side down
By pushing USB key on remote control you can access Contents Browser, Connect or
Disconnect and Format your connected USB device.
4-6. USB Menu
4-6-1. Contents Browser. You can browse the content of the connected USB device.
4-6-2. Connect Drive
In normal case, user uses rarely this menu item when proper USB DISK connected to STB since
STB will find first proper partition and connect automatically. However, after change or format
the USB DISK, user should connect USB DISK by manually. In this situation user can select
partition if there are several partitions available.
4-6-3. Disconnect Drive
The STB communicate with USB DISK after proper USB connection made even though you do
not perform playing or recording. Thus if you disconnect the USB forcibly, it may cause USB DISK
corruption. For preventing it, you should do disconnect drive process before you plug out USB
DISK from STB. When you switch off the STB power, disconnect operation will process automatically.
At that time, you don’t need disconnect operation manually.
4-6-4. Drive Format
You can format the USB DISK when connected USB DISK have other file system than FAT32
or simply erase all the USB DISK contents by one time. This menu item will deactivate when the
USB DISK not properly connected or USB DISK is in recording / playing process.
G

5-3. SUB TITLE
Some programs are provided with subtitle tracks in one
or more languages, press button will select a subtitle
track. There are two type of subtitle displayed at this window.
Without any icon means teletext subtitle and means
DVB subtitle. Once you choose one of them, it will be saved on
the memory so next time if you tune to this program again
t hen last selected subtitle shows automatically until receiver
switched off.
5-4. EPG (Electronic Program Guide)
Press the button then it shows the short summary
of the current and scheduled programs if EPG data is
available on each service. For more detailed information
about selected program, press the button.
The
(red) button always cursor move to first event
wherever current cursor positioned. And the (green)
button will move to day tab. So you can quickly navigating
events.
5-2. FAV (Favorite)
To display favorite lists, press button. You can see a
screen left side figure. In this list, you can select favorite
group. For grouping of your own f avorite channels, please
refer to article 4-1-1.
Once you choose one of them, it always kept on the memory
unless you change another one. Current selected favorite
group will be displayed on the bottom side of number in
info banner.
INFO
EPG
11
5-1. INFO (Information)
If you press button, then detailed information of current program will be shows on bottom of the
display. While displaying banner, if you press button again then current program’s synopsis(NOW)
will be displayed at top of the banner. You can move NOW and NEXT synopsis by pressing and
button at this moment.
Information Display Contents
(1) Signal Level & Quality
(2) Program Number
(3) Program type
(4) Program Name
(5) Satellite Name
(6) Current synopsis
(7) Transponder Information
(8) Audio Track
(9) Teletext
(10) Sub Title
(11) Multi-Feed Program
(12) Dolby Digital
(13) Scrambled Service
(14) Source Video Resolution
(15) Program Running Time
(16) Current Time
INFO
INFO
You can use following Remote Control Buttons for searched programs
5. Direct Buttons of the Remote Control

12
5-10. VIDEO FORMAT
This receiver supports various video output resolutions such as 1080i, 720p, 576p for YPbPr
and HDMI output. If you press once, the display show s current resolution. Press again within
3 sec, resolution will be change following sequence. 1080i > 720p > 576p. Also You can change
video output resolutions at front key. Press up & down key simaltaneous, then it activate video
resolution change menu. Press up or down within 3sec, video resolution will be change.
5-11. I-II (Audio Track)
Press button the n you can select one of the audio tracks
from audio list dialog. The default value is Auto which means
audio track will follow selected preferred audio language in
preference menu. If you choose another track at this dialog,
it always precedes selected preferred audio language. Please
keep in mind all of the audio tracks for each channel will stored
to the internal memory until receiver swiched off.
5-12. OK (Channel List)
You can call the Channel List window by pressing button.
You can change filter conditions dynamically for all channels
on the list. These conditions are FAV, Satellite, Provider, number
or Alphabet order. If you change one of the filter condition, it will
kept current status unless you change to another one. Please
make sure if you modify anything on the channel edit menu, the
channel list filter condition always set to All. Whenever you can
find current filter condition on the title.
5-8. SAT
If you press button, you can see the satellite list what
you installed. If you choose one of them, that satellite list will
memorized and shown unless you change another one.
5-9. MUTE : If you press button,
You can switch the sound ON/OFF.
OK
5-13. TV / RADIO Press b utton then you can switch TV / RADIO mode. It will be automatically
changed wallpaper in radio mode to prevent display damage.
4. Using the MENU System
5-5. TELETEXT
On some services, such information as weather reports, news or stock quotations is provided by means
of teletext. If current program provides teletext service, it will display on the information display. For activate
teletext service, press button. Press a number button to viewing desired teletext page. Also you can use
four teletext buttons ( red, green, yellow, blue) for more easy to use of teletext services.
If you want to exit from teletext service, you just press button or press button again.
5-6. RECALL : You can change to previous program by pressing button.
EXIT
5-7. OPTION (MULTI-FEED)
Press button works for option. Mainly it used activate of
Multi-Feed function which is program watching mode if the
program supported. In the other case, it assigned other
functions. At that time it will be explained at the bottom of
the screen.

The HD-Receiver has a specific firmware which is stable and convenient use.
However, for improvement of the product functionality, new firmware may be released.
You can get the latest firmware from your Protek Distributor or directly at www.protek.tv
6-1. Checking current firmware version
You can check up the current firmware information of your HD-Receiver before downloading
latest firmware. In the main menu, select System Information then you can check the current
version number.
6-2. Upgrade from the USB memory device
You can upgrade the HD-Receiver firmware to latest firmware. It should identical match the
system identification between HD-Receiver and latest firmware. If not you will fail in firmware
upgrade. Please follow below step for upgrade.
Step-1. Prepare any size of USB memory stick.
Step-2. Download latest upgrade firmware from the www.protek.tv
Step-3. Copy this file to your USB memory stick.
Step-4. Insert the USB memory stick to HD-Receiver USB port.
Step-5. In the main menu, select System Information > Firmware Upgrade menu.
Step-6. Select a file and choose "YES" item to starting upgrade.
Step-7. Wait a minute until upgrade finished. Information OSD will appear.
Step-8. When finished the upgrade, the HD-Receiver will be restarted automatically.
Your HD-Receiver is designed to give you trouble-free performance for many years. If you
have a problem with your HD-Receiver, try the solutions listed below.
Problem Possible Causes What to do
The front display does not light up. Power cable is not connected.
Checkup the power cable which is
plugged in to the AC wall mounted
socket.
No sound or picture, but the
clock display in the front panel.
The HD-Receiver is not
powered on.
Press the power button on the
front panel or remote controller
to power ON status.
Pixelated picture. Signal too weak or No antenna
connected.
Check the antenna or antenna
connection.
No picture, but sound is OK. Your HDTV does not support
selected video resolution.
Check the video format. Refer to
article 5-11. Video Format
The sound is OK, but the picture
is blank. The picture is OK, but
the sound is blank.
Audio or video connection
is not good.
Check up the audio/video
cable or connection.
The remote control is not
working.
Battery exhausted. Remote control
is incorrectly aimed. Blocked the
HD-Receiver front panel.
Change the batteries. Aim the remote
control at HD-Receiver. check that
nothing blocks the front panel.
Display “No or Bad Signal”
message.
Antenna connection not stable.
Antenna setting wrong.
Check the antenna cable.Check the
antenna setting menu again.
Cannot descramble the
CA channel.
Card not properly inserted.
Subscription period expired.
Check the insertion status for Card.
Check the subscription status.
Note :
Your USB memory must be formatted in the FAT 32 file system. Otherwise, the digital receiver
cannot recognize your USB memory. In addition, the digital receiver can only recognize files
and directories which are named with only alphabetic, numeric and underscore letters. If there
is a file or folder named with other letters, the digital receiver cannot recognize not only it but
also its subsequent files and folders.
13
6. Firmware Upgrade
7. Trouble Shooting Guide

6) Memory
5) Environment
7) Physical Specification
340mmx70mmx270mm
About 2.1Kg
Size (WxHxD)
Weight (Net)
Input Connector 1 x F type 75 Ohm.
1) Tuner
Output Connector 1 x F type 75 Ohm, Loop through
Frequency Range 950MHz to 2150MHz
Input Impedance 75 Ohm, Nominal
Signal Level -25 dBm to -65 dBm
LNB Power & Polarization
Vertical +13.0V~+14.0V
Horizontal +18.0V~+19.0V
Current: 400mA Max.
22KHz Tone Frequency 22KHz +/- 2KHz
Amplitude 0.6Vpp +/- 0.2Vpp
Demodulation QPSK, 8PSK
Input Symbol Rate
QPSK/LDPC/BCK : 20Msps to 30Msps
8PSK/LDPC/BCH : 1Msps to 31Msps
DVB-S QPSK : 2Msps to 45Msps
Code Rate
QPSK/LDPC/BCK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 8/9, 9/10
8PSK/LDPC/BCH: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
2) MPEG Transport Stream A/V Decoding
Profile & Level MPEG-2 MP@HL, MPEG-2 MP@ML,
MPEG4-p10/H.264 Level4
Video Resolution 720x576i, 1920x1080i, 1280x720p, 720x576p
Audio Mode
MPEG-1 Layer 1/2, MPEG-2 Layer 2, Dolby Digital(AC-3)
Stereo, Dual Channel, Joint Stereo, Mono
32, 44.1 and 48KHz
20Hz~20KHz, less than +/- 2dB flatness,less than 2Vrms
Transport Stream
Audio Decoding
Sampling Rate
Audio Frequency Range
ITEM SPECIFICATION
MPEG-2 ISO/IEC 13818
Transport Stream Specification
3) Output Terminal
1 x RCA
1 x YPbPr (3 RCA)
HDMI Output 1 x HDMI
Stereo Audio Output
1 x S/PDIF Optical, 1 x SPDIF(Coaxial)
1 x Stereo Audio RCA (L/R)
1 x USB 2.0 HOST Type A
1 x RJ45 LAN Port
Digital Audio Output
Data Interface
1 x TV SCART
SCART
LAN
SD CVBS Output
HD YPbPr Output
Smart Card 1 x Smart Card slot
4) Power Supply
AC180~250V~, 50/60Hz
SMPS
Less than 2W.
16W Typical. 30W Max.
Power Consumption
Input Voltage
Type
Standby Power
Consumption
Protection
Separate Internal Slow Blow Fuse and
Chassis Ground.The input should have
Lightning or Electronic Shock Protection.
Operating Temp
Storage Temp
Operating Humidity
Storage Humidity
0 C ~ +50 C
-20 C ~ +65 C
10%~85% RH non condensing
5%~90% RH non condensing
Flash Memory 64Mbit Flash × 1
SDRAM (System) 512Mbit DDR SDRAM × 2
SDRAM (Video) 256Mbit DDR SDRAM × 2
14
8. SPECIFICATIONS
Note : Specifications are subject to change without notice