Pro2 BMR5X User manual
1
BLUETOOTH HD
MUSIC RECEIVER
With A2DP, Qualcomm aptX® HD, aptX® Low Latency ,
aptX® normal supported
Model: BMR5X
Feature
◎aptX® HD, aptX® Low Latency, aptX® normal codec support
◎SBC codec support
◎A2DP Bluetooth profile supported
◎66 feet (20M) effective range
◎TOSLINK digital audio output
◎Audio RL audio output
◎8 devices ID storable
What’s in the box
Main unit
USB adaptor
3.5mm male
male audio cable
3.5mm female
audio RL cable
2
Outlook and connectors
Setup your BMR5X
Front
Top View
Back
Bottom
Adaptor
TOSLINK Cable
OR
3.5mm male to male
Audio R-L
Audio Amplifier
3
Analogue connection
1. Connect one 3.5mm end of the included audio cable to headphone jacket on the
BMR5X.
2. Connect the other end to an audio input on your home stereo system (3.5mm or
3.5mm + 3.5mm2 RCA). Consult your stereo user’s manual for more
information on how to accomplish this.
Digital connection
1. Connect one TOSLINK cable end to optical jacket on the BMR5X
(recommended).
2. Connect the other end to one TOSLINK input of your home stereo system.
Consult your stereo user’s manual for more information on how to accomplish this
3. Connect AC power adaptor cable to DC input jacket of BMR5X, AC end to any AC
outlet.
4. The LED light will flash once to show the unit is powered and ready for being
paired for your devices.
Pairing your BMR5X
iPad/iPhone/iPod touch
1. Go to Bluetooth manager of your iPad/ iPhone/ iPod touch by the following steps
a .From your iPad/ iPhone/ iPod
touch home page, tap “setting”
b. Inside Settings tap on
“Bluetooth”
c. Turn on the Bluetooth
function
4
2. Your iPod/ iPhone/ iPad
will auto searching
available device. You will
see “HD Receiver” then
Tap on it
4. If you want to disconnect ,
press information , tap on
disconnect
3. Your iPod/ iPhone/ iPad
connected to BMR5X
Now. And you can play
music from your iPod/
iPhone/ iPad
5. Your iPod/ iPhone/ iPad
will disconnect
5
Android Phone/Tablet（ver 9.0 as example with aptX HD support）
1. Go to Bluetooth manager of your smart phone by the following step:
a. From your smart phone home
page, tap on “setting”
b. Inside the setting, turn on The
Bluetooth
c. Bluetooth is turned on
2. Searched Bluetooth
Devices will show up,
please tap on “HD
Receiver”
4. Once paired, the blue LED light on the
BMR5X will flash once.
The Blue LED will keep lighted when a
connection is established
And In your Smartphone there is showed
“connected, active(media) and aptX HD”
6
Please note: Some devices, like the iPhone, can play the music immediately after
the successful pairing, and the LED will light up.
Some devices may need an extra step after the pairing, like Mac Pro, to select the
Bluetooth output, then the LED will light up when a connection is established.
Although the BMR5X can only play music from one device at a time, it is capable of
being paired to up to 8 devices.
You can play the music now. Just play music on your device as you normally would and
the sound will come out from your stereo system.
Note: the effective range of BMR5X is 66 feet (20M) (light of sight). If you hold
and wear the Smartphone or tablet and cover the Bluetooth antenna, the
distance will be shorter.
Reconnecting your device：
If you move out of range or turn off the Bluetooth feature on youriPad/ iPhone/
iPod touch or Smartphone, BMR5X will be disconnected from your device. To
reconnect, simply open the Bluetooth manager and tap on the “BMR5X”, then you do
not need to input PIN again, the connection will be done automatically.
Adding a new phone or tablet：
If you want to switch from one device to another, please follow these steps
1. End the existing Bluetooth connection with connected device.
2. The BMR5X can now be connected with another device such as iPad/ iPod/
iPhone or Smartphone or tablet.
3. Follow the section “Pairing the BMR5X” to connect a new device.
Out of range or lost signal:
When the paired phone or device away from receiver (66 feet) or there is something
blocking the Bluetooth signal. The LED light will go off, it means the connection
between device and BMR5X is lost. To avoid a lost connection:
1. Move the music device back into range (within 66 feet), and make sure there’s a
clear line of sight and there are no obstruction between BMR5X and device.
2. Within 10 mins, the connection will automatically be reestablished and LED will
turn on.
3. If the connection is lost for more than 30 seconds, you need to reconnect the
device and BMR5X again. Please follow the “Reconnect Your Device” section.
7
Indication of LED
Troubleshooting
You can solve your problems from this section
No music out from my stereo speaker
◎Make sure the BMR5X is powered
◎Make sure an audio cable or an Optical cable is correctly and firmly connected to
BMR5X
◎Make sure that the audio source selection of your amplifier is correct with your audio
connection (analogue audio or TOSLINK)
◎Make sure the volume of the stereo is set to a comfortable listening level
◎Make sure you are within range
◎Make sure the Bluetooth function is opened on your device
◎Make sure you are playing the music from your device
SAFETY WARNINGS
◎BMR5X requires full connection and both hands to install
◎Do not use BMR5X near water(for example, a bath tub, wash bowl, kitchen sink,
laundry tub, wet basement, swimming pool, or other areas located near water)
◎Clean with dry cloth
◎Unplug the BMR5X before cleaning
◎Install BMR5X far away from heat sources
◎Use only the attached accessories
◎Unplug the BMR5X when unused for long time
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States
and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd.,
registered in the United States and other countries
Indication meaning Description
Flash once 1 sec
per 5 secs
Power on
/Pairing
Waiting for connection
Permanent Lighted Connected Device and main unit are connected
Table of contents
