PROAIM AP-PTP-SCSR User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Mounng Plate for Scissor Crane (AP-PTP-SCSR)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Proaim Mounng Plate for Scissor Crane
1 x 4mm Allen Key

2
Mounng Plate Setup
 Remove the bolts and then remove the Gimbal
uid head from the Powermac scissor jib
(Not Included).
 Aach the mounng plate to the Powermac
scissor jib (Not Included), matching the
threads.
 Loosen & remove the 4 bolts from the
mounng plate using a 4mm Allen Key.
NOTE: Mounng plate for pan-lt head is
exclusively designed to use with Scissor Crane
(Not Included).
 Firstly, remove the uid head (Not Included)
aached to the 17 Powermac Scissor Jib by
loosening the front and rear bolts using a 4mm
Allen key.
 Aer aaching the mounng plate, secure it
by inserng bolts with the help of a 4mm
Allen Key.
 The mounng plate has been securely
aached to the Powermac Scissor Jib
(Not Included), as shown in the image.

3
 Aer inserng the bolt, insert the washer and
wing nut from the top.
 Mount the camera (Not Included) to the
camera plaorm of the pan-lt head, properly
align it, and then insert a check nut in it.
 To secure the Scissor Mounng Plate to the
Pan lt (Not Included), properly ghten it with
a wing nut as shown in the image.
 Aach the pan lt head (Not Included) to the
Scissor Crane Mounng plate by adequately
aligning the hole and inserng the bolt, as
shown in the image.
 Tighten the check nut to properly secure the
camera to the camera plaorm, as shown in
the image.

4
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.
YOUR PROAIM MOUNTING PLATE FOR SCISSOR CRANE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)