PROAIM VCTR-CM User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Horseshoe
Mount
91cm Rod Accessory Cross-Bar
Camera Mount System for Camera Cart (VCTR-CM)
3/16mm Allen key,
1/4 x 25mm Bolt
Clamp A Clamp B

2
• Align and aach clamp B to the accessory
crossbar, insert the knobs and ghten them
properly.
Camera Mount System Setup
• Loosen the side clamp knobs of the crossbar
and mount the crossbar on the rods of the
cart.
• Tighten the clamp knobs properly to secure
the crossbar.
• Image showing clamp aached to the boom
crossbar of the cart.
• Loosen the ratchet knob and open clamp B on
the top crossbar.
• Aach clamp A to the boom crossbar, insert
the knobs and ghten them properly.
Note: If the clamps on the crossbar are too ght when the product is received or do not get clamped on
the cart rods properly, then slightly loosen the Allen bolt to adjust and clamp them on to the rods.

3
• Slide the Horseshoe Mount onto the 91cm
Rod.
Note: You can change the posion of the
Horseshoe Mount on the Rod as per your
requirement.
• Insert the 91cm rod into both the clamp
holes.
Horseshoe Mounng
• Tighten the ratchet knob of the horseshoe
mount.
• Place the Mitchell Plate on top of the Horse-
shoe Mount, align their threads, and insert
(1/4 x 25mm) bolts.
• Secure the bolts with a 3/16mm Allen Key.
• Tighten the ratchet knob of clamp B.

4
• Cart setup with Camera Mount System is
ready.
YOUR PROAIM CAMERA MOUNT SYSTEM FOR CAMERA CART
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.