PROAIM CM-ISGP-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Iso-Grip Vibraon Isolator Car Camera Sucon Mount
(CM-ISGP-01)
Assembly Manua l
1 x Sucon Car Mount
LN CSK Bolts
2 x 1/4"x 30mm Bag Packing
3 x Dust Covers 1 x DJI - QR Plate
3 x Allen Keys
(sizes: 2.5mm, 3mm, 4mm)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.

2
• Remove the black dust covers of the Sucon
Car Mount.
Iso-Grip Vibraon Isolator Setup
• Open the quick lock lever manually, as shown
in the image.
• Place your rst sucon cup on selected
posion where you want to shoot and Mount
the sucon cup gripper on a at surface, as
shown in the image.
• Press the lever of the Sucon Cup Gripper
and lock it properly.
NOTE: It has three powerful sucon cups that
grip like glue on any non-porous surface and
rmly hold your setup when moving at high
speeds.
• Loosen the quick lock, set the posion
according to your setup requirement, and
ghten it properly.
NOTE: Its three arculang arms let you
posion your camera gimbal set up at
praccally any angle.

3
• Place the DJI-QR Plate onto the Sucon Car
Mount.
• Then insert an Allen CSK Bolt and ghten
properly using a 4mm Allen key.
• Follow the same process on the other Allen
CSK Bolt.
• Loosen the knob of the DJI-QR Plate.
NOTE: If the QR Plate is loose, ghten its bolt
properly using a 2.5 mm Allen Key.
• Slide the DJI-Ronin Gimbal (Not Included) into
the plate and secure it with the knob of the
QR Plate.

4
• Here is proper assembled image of Sucon
Car Mount & mount. your DJI-Ronin Gimble
(Not Included) of your choice as shown.
NOTE: You can use the wires in dierent
conguraons depending on the load capacity
of your setup.
YOUR PROAIM ISO-GRIP VIBRATION ISOLATOR CAR CAMERA SUCTION MOUNT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
NOTE: It has wire cable blocks that absorb ineral movements and support a 3-10 kg / 6-22lb heavy payload;
Use these blocks in dierent conguraons to precisely achieve the li needed.
Load Adjustment, Removable Cables & Tie-Down Blocks

5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.